Investigations of Stability & Dynamic Performances of a Current-Injected Regulator

The stability and dynamic performances of a buck/boost regulator employing a current-injected control are examined. Small-signal models for the power state, the multiloop error processor, and the duty-cycle pulse modulator are developed. The error-processor model which incorporates the current-injected loop, the dc loop, and the compensation network permits evaluation of the effects of each individual control loop and their combined efforts toward shaping the performance characteristics of the closed-loop system. Comparisons are made between this modeling approach and earlier approaches. Some important yet subtle dissimilarities are discussed. This model predicts the constant-frequency 50-percent duty-cycle instability which is inherent to the current-injected control.     

9. The venus ionosphere and solar wind interaction

The current state of knowledge of the chemistry, dynamics and energetics of the upper atmosphere and ionosphere of Venus is reviewed together with the nature of the solar wind-Venus interaction. Because of the weak, though perhaps not negligible, intrinsic magnetic field of Venus, the mutual effects between these regions are probably strong and unique in the solar system. The ability of the Pioneer Venus Bus and Orbiter experiments to provide the required data to answer the questions outstanding is discussed in detail.     

基于光滑粒子流体动力学方法的液滴蒸发问题数值模拟研究

基于光滑粒子流体动力学方法（Smoothed Particle Hydrodynamics，SPH），开展了SPH新算法在蒸发燃烧领域的研究。建立了适用于SPH方法的蒸发数值模型，推导了基于傅立叶热传导公式和菲克扩散定律的SPH离散方程；借鉴VOF方法（Volume of Fluid）的思想，提出了SPH粒子的液相质量分数的概念，以有效表征蒸发过程中的相变问题。采用SPH方法对高温环境中单个液滴的蒸发过程进行数值模拟，结果符合D2定律，与理论模型相一致；在强迫对流环境中，液滴的蒸发过程受到对流作用及表面张力的影响，蒸发速率加快；进一步对双液滴在静止、对流环境中的蒸发过程进行数值模拟研究。结果表明，液滴的间距、滴径对多个液滴的蒸发过程影响至关重要，液滴间距至少在两倍的液滴直径以上，相互之间的影响才可以近似忽略。通过本文研究，拓宽了SPH方法在蒸发相变领域的应用范围，研究结果也能够为进一步的燃烧问题研究奠定基础。     

Medium PRF radar PRF selection using evolutionary algorithms

Evolutionary algorithms are applied to the optimization of pulse repetition frequency (PRF), for both eight-and nine PRFs, in medium PRF radar while considering the detailed effects of sidelobe clutter and many other technical factors. The algorithm presented also ensures that all the solutions produced are fully decodable and have no blind velocities. The evolutionary algorithm was able to identify near-optimum PRF sets for a realistic radar system with only a modest computational effort.     

叶片摩擦阻尼器的优化设计方法研究

为减小叶片振动应力 ,防止叶片出现大应力的疲劳破坏 ,在叶片上设计干摩擦阻尼结构是最常用的方法之一。本文对叶片缘板摩擦阻尼器的工程优化设计方法进行了研究。研究了摩擦阻尼器参数对叶片响应的影响规律并提出了设计时应采取的措施。在阻尼器的材料和摩擦面结构已确定的情况下 ,优化设计的最主要的一个参数就是接触面的法向正压力 ,基于实际发动机中叶片激振力和粘性阻尼不易精确确定的实际 ,研究了激振力和粘性阻尼对法向正压力优化的影响 ,并提出了一种法向正压力的优化方法。由于这一优化方法对激振力和粘性阻尼值并不敏感 ,因此为工程上进行法向正压力的优化提供了理论方法     

Observational Manifestation of Chaos in the Gaseous Disk of the Grand Design Spiral Galaxy NGC 3631

The main goal of the paper is to demonstrate the presence of chaotic trajectories in the gaseous disk of a real spiral galaxy. As an example we have chosen NGC 3631. First, we show the stationarity of the 3-D velocity field restored from the observed line-of-sight velocity field of the gaseous disk. That allows to analyse behaviour of the trajectories of the fluid particles (gas clouds) in the disk, calculating the corresponding observed streamlines. We estimate the Lyapunov characteristic numbers using their independence of the metrics and show the existence of chaotic trajectories outside the vortices which are present in the velocity field, and in the vicinity of the saddle point. Related spectra of the stretching numbers for some trajectories are also calculated.     

先进的变载吸能器

传统的定载吸能器以50百分位男性乘员满足95％生存率为条件设计，它不能为全体乘员提供保护，变载吸能器能够根据乘员重量而调节动作载荷，为全体乘员提供最合理的保护，同时可以大大降低吸能器的冲击行程。     

Review of flow control mechanisms of leading-edge vortices

Vortex control concepts employed for slender and nonslender delta wings were reviewed. Important aspects of flow control include flow separation, vortex formation, flow reattachment, vortex breakdown, and vortex instabilities. The occurrence and relative importance of these phenomena strongly depend on the wing sweep angle. Various flow control methods were discussed: multiple vortices, control surfaces, blowing and suction, low-frequency and high-frequency excitation, feedback control, passive control with wing flexibility, and plasma actuators. For slender delta wings, control of vortex breakdown is achieved by modifications to swirl level and external pressure gradient acting on the vortex core. Effects of flow control methods on these two parameters were discussed, and their effectiveness was compared whenever possible. With the high-frequency excitation of the separated shear layer, reattachment and lift enhancement in the post-stall region is observed, which is orders of magnitude more effective than steady blowing. This effect is more pronounced for nonslender wings. Re-formation of vortices is possible with sufficient amplitude of forcing at the optimum frequency. Passive lift enhancement on flexible wings is due to the self-excited wing vibrations, which occur when the frequency of wing vibrations is close to the frequency of the shear layer instabilities, and promote flow reattachment.     

A relative navigation system for formation flight

A relative navigation system based on both the Inertial Navigation System (INS) and the Global Positioning System (GPS) is developed to support situational awareness during formation flight. The architecture of the system requires an INS/GPS integration across two aircraft via a data link. A fault-tolerant federated filter is used to estimate the relative INS errors based on relative GPS measurements and a range measurement obtained from the data link. The filter is constructed based on a reduced-order model of the relative INS error process. A method for analyzing the filter performance is presented. A case involving two helicopters in formation flight is studied under three different night trajectories to account for the effect of vehicle motion on the INS state transition matrix. The results of the covariance analysis are compared with actual night results over an instrumented test range.     

吸力面翼刀对压气机叶栅内二次流的影响

1引言在叶轮机械叶栅内流动控制中,可以通过在叶片吸力面、端壁上安装翼刀或隔片,控制二次流的发展,降低二次流损失,其中将翼刀加装在吸力面上的控制方式即为吸力面翼刀控制技术。吸力面翼刀主要是通过阻断端壁附面层和叶片吸力面附面层近端壁处低能流动沿吸力面的展向迁移来对