Distributive Demand-Assigned Packet Switching with Trailer Transmissions

In a packet satellite system using ALOHA type random access techniques, channels and on-board processing may be effectively used to provide significant gains in throughput, delay, and bandwidth efficiency. Motivated by this conjecture, a distributive demand-assigned packet broadcast system through a processing satellite with multiple request channels and user buffers is first presented. This scheme is shown to be able to achieve the above goals except, as any other demand type scheme, it also exhibits relatively poor delay performance at low traffic when compared with pure random access schemes. An extended scheme using trailer transmission to improve delay performance at low traffic is then introduced. Two techniques for handling trailer transmissions are studied and compared. Both are shown to provide lower packet delay at light trafric. lay at light traffic.     

材料非线性有限元分析的一种有效方法——预测割线刚度变刚法

 材料非线性有限元增量解法中如何减少加载次数,保证精度是两个重要的问题;而误差估计也是与之密切相关的问题,特别是对每次加载不进行迭代的增量变刚法。本文针对这些问题提出预测割线刚度变刚法。     

Neutral buoyancy and sleep-deprived serum factors alter expression of cytokines regulating osteogenesis

We examined expression of genes associated with cytokine production, and genes implicated in regulating bone metabolism, in bone stromal and osteoblast cells incubated under standard ground conditions and under conditions of neutral buoyancy, and in the presence/absence of serum from normal or sleep-deprived mice. We observed a clear interaction between these two conditions (exposure to neutral buoyancy and serum stimulation) in promoting enhanced osteoclastogenesis. Both conditions independently altered expression of a number of cytokines implicated in the regulation of bone metabolism. However, using stromal cells from IL-1 and TNFx cytokine(r) KO mice, we concluded that the increased bone loss under microgravity conditions was not primarily cytokine mediated.     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

双燃式冲压发动机中超燃燃烧室冷态流场数值模拟

采用Ｍａｃ Ｃｏｒｍ ａｃｋ 矢通分裂格式, 求解雷诺平均的Ｎ－Ｓ方程组, 采用Ｂａｌｄｗ ｉｎ－Ｌｏ－ｍ ａｘ 代数湍流模型和混合长度模型, 模拟超燃燃烧室内两股平行超声速来流的冷态流场, 取得了与试验相一致的结果, 计算表明回流区和射流流动参数对超燃燃烧室流场内波系的变化有着较大的影响。     

刀形检测系统及空间测量坐标系的建立

论述一种基于二维视觉的刀形检测及调位系统,给出了测量系统的机械结构以及刀具 原理,分析了系统测量坐标系建立的原理和方法,并给出相关的实验数据。系统的研制实现了高效、精确、自动的刀形检测和位置调整,为高精度数控加工提供了保障。