碳纳米管阵列推力器放电特性的数值模拟研究

基于直接蒙特卡洛(DSMC)算法、浸入式有限元算法(IFE)、粒子云及蒙特卡洛碰撞(PIC-MCC)算法以及Ammosov-Delone-Krainov(ADK)隧穿电离模型建立了碳纳米管阵列推力器工质气体和CNT场电离过程的三维仿真模型。利用文献中的实验数据对本文仿真模型的有效性进行了验证,结果表明本文仿真模型与实验结果基本一致。针对碳纳米管阵列推力器的放电特性进行了研究,并重点分析了离子与原子碰撞过程对碳纳米管阵列推力器放电特性的影响。结果表明CNT可以极大地增强局部电场,稳态时场增强因子约为1308;与原子的碰撞使得离子在CNT附近更加集中,降低了局部电场,进而降低了其场增强能力。     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

Predicting lean blow-off of bluffbody stabilized flames based on Damköhler number

Lean Blow-Off(LBO) prediction is important to propulsion system design. In this paper,a hybrid method combining numerical simulation and Da(Damk?hler) model is proposed based on bluffbody stabilized flames. In the simulated reacting flow, Practical Reaction Zone(PRZ) is built based on OH radical concentration, and it is considered to be the critical zone that controls LBO.Da number is obtained based on the volume-averaged parameters of PRZ. The flow time scale(s_f)indicates the residence time of the fresh mixture flowing through the PRZ. It is obtained based on the characteristic length and volume-averaged axial velocity of the PRZ. The chemical time scale(s_c) indicates the shortest time needed to trigger the reaction of the mixture. It is obtained by commercial software CHEMKIN through monitoring the transient variation of the reactor temperature. The result shows that the average Da number under different LBO conditions is 1.135(the Da number under each LBO condition ranges from 0.673 to 1.351). This indicates that the flow time scale and chemical time scale are comparable. The combustion is in a critical state where LBO is easy to occur. With the increase of the fuel mass flow rate(the global fuel/air ratio increases from 0.004761 to 0.01095), s_f increases from 0.001268 s to 0.007249 s, and s_c decreases from 0.00124 s to0.00089 s. Accordingly, Da number increases from 1.023 to 8.145, which shows that the combustion becomes more stable. The above results show that the method proposed in the present study can properly predict the LBO limits of combustors, which provides important technical supports for combustor design and optimization.     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

大型水陆两栖飞机抗浪能力研究

阐述了大型灭火/水上救援水陆两栖飞机高抗浪船体设计方法，对飞机起飞过程中的水阻力、滑行稳定性和波浪运动响应进行了研究。通过对比分析，发现断阶喷溅形态是影响水阻力出现第2峰值的关键因素，提出了水阻力曲线出现第2峰值的条件；分析了在纵倾角-速度图中不同区域滑行时飞机纵倾角响应特性，明确了飞机在典型状态的稳定边界；通过研究波长、速度对飞机纵倾角、飞高和机身垂向过载的影响，确定了飞机在波浪水面发生剧烈运动响应时对应的波长范围。     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

高频地波雷达海杂波背景下目标检测研究综述

高频地波雷达探测距离远、全天候、实时准确探测等优点在目标检测领域广泛应用。针对海杂波会干扰目标检测的问题，分别从非线性预测类、分形类、子空间分解类、对消类等方面对海杂波背景下目标检测方法进行了综合评估。归纳总结国内外相关文献，并对目前方法存在的不足进行总结。为以后深入研究海杂波干扰问题提供参考。     

数值求解人体生物热方程时边界条件的处理方法

本文提出了一种数值求解人体生物热方程时边界条件的处理方法,该方法以生物传热学理论为基础,通过引入“当量皮肤温度”T_(tb),对皮肤层内的生物热方程作了适当修改,并且推导出了采用交替变换方向法(Alternating direction implicit method)求解人体温度场时,边界节点的离散方程。     

极限拉深系数研究

本文通过理论分析，推导出筒形件及带凸缘的筒形件第一次拉深的极限拉深系数的近似计算公式，并与多种材料实验值进行比较，表明此方法精确度较高。     

彩色计算干涉技术及应用

在对高速气流进行干涉法测量时 ,由于激波的作用或者光的散射、斑点等现象 ,干涉图的干涉条纹可能会出现不连续。笔者通过仿真M Z干涉仪或全息干涉仪光学模型 ,并且采用对多块不规则网格的计算流体力学结果进行重构的直接体视化图形算法 ,得到了高分辨率的彩色数值干涉图 ,克服了干涉条纹的不连续性并给出了一个弹道靶中超高声速钝锥流场的例子