三乙胺与硝酸-27S自燃技术研究

三乙胺和硝酸-27S作为自燃推进剂可应用于火箭发动机中。对这两种自燃推进剂的燃烧性能进行了研究,应用逐步逼近法计算其热力性质,当最佳混合比为4．1,燃烧室压力为4．5MPa时,最佳海平面比冲为2786m／s。通过试验证明了三乙胺和硝酸-27S自燃技术的可行性。     

Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links

In order to suppress vibration in flexible manipulators, a new type of manipulator mechanism with controllable local degrees of freedom is proposed. This mechanism consists of a main chain and some branch links. The main chain is of a flexible open-chain configuration with an end-effector installed at its tip, and the rigid branch links are able to perform active movements. It is proved by kinematics and dynamic analysis that, the branch links bear no direct kinematic relation to the main chain, but their independent motions can strongly affect the dynamic behavior and performance of the flexible manipulator. Then comes a new idea of suppressing vibration, in which independent motions of the branch links are used to suppress the undesired vibration of the flexible main chain through dynamic coupling. On this basis, an optimal method for reducing vibration of flexible manipulators is proposed. Finally, the effectiveness of this method is verified by numerical simulations.     

热障涂层红外热无损检测的建模和有限元分析

在柱坐标系下以轴对称模型描述热障涂层结构TNDT(Thermal Non-Destructive Testing)的瞬态热传导,建立相应的物理模型.用有限元分析软件ANSYS计算热障涂层结构受热脉冲激励后的温度场,研究TNDT可检信息参数(如最大温差和最大对比度)与脱粘缺陷半径、深度、涂层厚度的关系.结果表明,在涂层厚度一定时,最大温差和最大对比度与脱粘缺陷半径成非线性关系,它们随着缺陷半径的增大而增加,且存在上限饱和值;在缺陷半径一定时,最大温差和最大对比度与涂层厚度成非线性关系,且随着涂层厚度的增加而减小.这些研究结果为热障涂层内部脱粘的红外热无损检测及表征提供了基本理论依据.     

Design of a canard configured TransCruiser using CEASIOM

CEASIOM is a multidisciplinary software environment for aircraft design that has been developed as part of the European Framework 6 SimSAC project. It closely integrates discipline-specific tools such as those used for CAD, grid generation, CFD, stability analysis and control system design. The environment allows the user to take an initial design from geometry definition and aerodynamics generation through to full six degrees of freedom simulation and analysis. Key capabilities include variable fidelity aerodynamics tools and aeroelasticity modules. The purpose of this paper is to demonstrate the potential of CEASIOM by presenting the results of a Design, Simulate and Evaluate (DSE) exercise applied to a novel, project specific, transonic cruiser configuration called the TCR. The baseline TCR configuration is first defined using conventional methods, which is then refined and improved within the CEASIOM software environment. A wind tunnel model of this final configuration was then constructed, tested and used to verify the results generated using CEASIOM.     

The relation between the Black hole mass and the Bulge mass for low redshift AGNs. Part I: Ground-based observations

Using the bulge data from AGN image decomposition with ground-based observations, we calculate the ratios of the central supermassive black hole mass(SMBH) to the Bulge mass (_Mbh/_Mbulge$M_{\text{bh}}/M_{\text{bulge}}$) in a sample of X-ray selected AGNs, including 15 Narrow-line Seyfert 1 galaxies (NLS1s) and 18 broad-line Seyfert 1 galaxies (BLS1s). We found that the mean value of log(_Mbh/_Mbulge)$\log (M_{\text{bh}}/M_{\text{bulge}})$ is -3.81±0.11$-3.81\pm 0.11$ for 15 NLS1s, and -2.91±0.13$-2.91\pm 0.13$ for 18 BLS1s, showing the lower _Mbh/_Mbulge$M_{\text{bh}}/M_{\text{bulge}}$ in NLS1s relative to BLS1s. The calculation shows that the Bulge mass from the host image decomposition in NLS1s is statistically smaller than that from Hubble-type correction method, and a linear mass relation is suggested for NLS1s and a nonlinear mass relation for BLS1s. The studying of host galaxies with ground-based observations strongly limited by the atmospheric seeing. We need to do the decomposition of host images for NLS1s with Hubble Space Telescope observation in the future.     

光栅式长度仪表示值误差检定系统

介绍了光栅式长度仪表示值误差检定系统的基本工作原理以及关键技术的解决。本系统具有测量精度高、重复性好、智能化、操作简单、用户可自由扩展等优点。     

基于预计算和周期性的ECC标量乘法算法

在研究二进制、带符号的二进制(NAF,Non-Adjacent Form)等常见标量乘法算法的基础上,结合椭圆曲线基点的周期特性和预计算倍点序列方式,提出了一种新的标量乘法算法,并给出了新算法的详细步骤.点的周期性和系数决定了直接进行标量乘法运算还是转化为求其逆元,预计算倍点序列方式避免了椭圆曲线密码体制(ECC,Elliptic Curve Cryptosystem)加解密过程中大量的重复运算.为验证算法的正确性,采用密钥长度为192 bit椭圆曲线,给出了一个具体实例.实例结果和算法分析表明:与二进制和NAF算法相比,新算法虽占用了一些存储空间,但省去了倍点运算的时间开销,同时减少了点加的运算次数,极大地提高了标量乘法运算的效率.该算法的提出对完善ECC理论和加快ECC在实际中的应用具有重要意义.      

基于代理模型的大型民机机翼气动优化设计

先进的气动优化设计思想与方法,对于提升大型民机气动与综合性能具有至关重要的意义。探讨了大型民机超临界机翼气动优化设计的基本准则和要点,并结合代理优化算法,提出了一种面向工程应用的多轮次高效全局气动优化设计方法。首先,通过一系列解析函数/翼型/机翼优化测试算例进行了验证。其次,将所提出的方法与人工修型相结合,开展了针对宽体客机超临界机翼的两轮气动优化设计,使其气动性能得到显著改善。最后,采用不同的雷诺平均Navier-Stokes（RANS）方程求解器对安装优化机翼的全机巡航构型进行了典型状态的气动性能综合评估。研究结果表明,所提出的代理优化算法具有很高的优化效率、较强的约束处理和全局优化能力;将所发展的基于代理模型的多轮次气动优化设计方法与人工修型相结合,能够获得满足设计要求的气动外形,验证了该方法在大型民机超临界机翼气动设计中的有效性和工程实用性。     

虚警影响下的备件库存优化

在虚警存在时完好的零部件被误诊为故障件而对维修站点发出备件需求,从而会对备件的需求率高估,所以需要引入虚警率修正备件需求率使之更为精确.证明了当虚警率服从指数分布时,考虑虚警的外场故障发生数仍然符合泊松分布.根据多层可修件库存控制理论,建立考虑虚警率的需求数和期望备件短缺数（EBO,Expected BackOrder）的函数关系,以期望备件短缺数为优化目标,对目标函数进行凸分析,建立面向系统虚警的备件配置凸优化算法,保证所选库存方案在系统发生虚警的情况下提高系统效能,并构建了某型飞机的应用验证案例,给出了最优的备件配置方案.