固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

统计滤波理论在飞行器制导系统中的应用

本文叙述了统计滤波方法中具有典型代表性的卡尔曼滤波的基本方法。简要说明了它在惯性平台的自对准与自校准;复合制导中的信息综合以及飞行试验后的误差分离和弹道参数最佳估计中的应用。指出了应用中尚存的问题及今后的可能发展。     

空间交会动力学和安全模式

本文首先导出空间交会相对运动方程并给出其物理解释,然后给出动力学方程的解析解,并分析其动力学性质,最后导出不碰撞安全区和位置保持点的表达式。选择适当初始条件可以求出安全区和保持点。     

大型复合材料结构优化设计方法研究

建立了适合于大型复合材料结构的优化设计方法，该方法在复合材料结构有限元分析的基础上对复合材料结构进行优化设计。在建立有限元模型时应用了区域划分技术，然后对结构分两级进行优化：第一级是对结构的铺层角度进行优化。第二级对结构的铺层厚度进行优化。最后，以工字梁结构为例，进行了算法验证。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

近期商用单级入轨飞行器的可行性

讨论了单级入轨火箭推进飞行器,尤其是使用航天飞机外置贮箱和六个航天飞机主发动机的一次性使用飞行器的可靠性和发射费用。减小发动机质量将是方案改进的主要方面。如果低成本、小质量的主发动机研制成功,那么一次性使用 SSTO(单级入轨)飞行器将拥有商用发射前景,而且有利于可重复使用 SSTO 飞行器的研制。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。