High-resolution simulation for rotorcraft aerodynamics in hovering and vertical descending flight using a hybrid method

A high-resolution simulation tool for rotorcraft aerodynamics is developed by coupling CFD with a Vorticity Transport Model (VTM). An Eulerian-based CFD module is used to model the blade near body flowfield, and a Lagrangian-based VTM module is employed for vortex tracking in the far wake. The coupling procedure is implemented by transmitting vortex sources to the VTM module and feeding boundary conditions back to the CFD module. The presented CFD/VTM hybrid solver is firstly validated by hover cases of three different rotor configurations. Simulation results, including the blade surface pressure distribution, rotor downwash, and hover figure of merit, exhibit favorable correlations with available experimental data. Then, a rotor operated in vertical descending flight with a fixed collective pitch is investigated. It is shown that the CFD/VTM coupling method is suitable for rotor wake simulation. Wake instabilities (far wake breakdown in hover and toroidal wake pattern in the vortex ring state) are successfully demonstrated with a moderate computational cost.     

Numerical study on flow control of ship airwake and rotor airload during helicopter shipboard landing

A numerical study on flow control of ship airwake during shipboard landing is carried out to address the effect of flow control devices on helicopter rotor airload. The in-house Reynolds Averaged Navier-Stokes (RANS) based solver Rotorcraft AeroDynamics and Aeroacoustics Solver (RADAS), with combination of momentum source approach is employed to conduct the helicopter shipboard landing simulation. The control effects of three aerodynamic modifications of ship superstructure, i.e. ramp, notch and flap, in different Wind-Over-Deck (WOD) conditions are discussed. From the steady simulation results, the effect of spatial variation of ship airwake on rotor airloads is concluded. The aerodynamic modifications reduce the strength of shedding vortex and increase rotor normal force through delaying and relieving flow separation, and therefore are beneficial to alleviate the limitation of control inputs. By contrast, the perturbation of unsteady ship airwake can cause the serious oscillation of rotor forces during shipboard landing. The unsteady simulations show that the turbulence intensity of ship airwake and oscillatory rotor airloading, represented by Root-Mean-Square (RMS) loading, can be remarkably reduced by the ramp and notch modifications, while the flap modification has adverse effect. It means that flow control devices have large potential benefits to alleviate the pilot’s workload and improve the shipboard landing safety, but they should be well designed to avoid the introduction of more vortex, which leads to increase in disturbance of flow field.     

车用柴油机冷EGR系统的设计与试验

为了降低车用柴油机NOx的排放量,设计了一套柴油机的冷EGR系统,通过对再循环的废气进行精确冷却来降低NOx的排放量.该系统可以通过控制电动水泵的转速来调节EGR冷却器冷却水的循环量,确保不同工况下EGR的最佳冷却温度范围.对冷EGR系统的主要部件文丘里管和EGR冷却器等主要部件进行了设计计算,并对冷EGR系统的电控单元ECU进行了设计.将该冷EGR系统在R4105T型柴油机试验台架上进行了试验.结果表明:与热EGR系统相比,在各种工况下冷EGR系统可以有效地降低NOx的排放量,且使得柴油机的燃油消耗率也有所降低.     

大学新生入学适应教育探析

本研究以410名大学新生为被试,采用问卷法调查了入学第一个学期学生的精神健康水平,考察了他们的入学适应状况,调查结果表明:一部分学生在新环境的适应上存在较多问题.本文在调查研究的基础上,对提高大学生入学适应水平的教育途径和方法做出了尝试性的探讨.     

舰载倾转旋翼机着舰域耦合流场数值模拟研究

倾转旋翼机是当前旋翼飞行器研究的热点,但有关舰载倾转旋翼机着舰域耦合流场的研究还很少。以两栖攻击舰(LHA)和V-22"鱼鹰"倾转旋翼机为研究对象,基于雷诺平均Navier-Stokes(RANS)方程和SST k-ω湍流模型对舰载倾转旋翼机着舰域耦合流场进行数值模拟研究,并探讨了不同着舰高度时机/舰耦合流场的相互作用。结果表明:倾转旋翼尾流会与舰船脱落涡、甲板舷涡以及舰岛艉涡发生较强的"涡-涡干扰"现象,加大了耦合流场的湍流强度;舰船流场的低频非稳态特征会导致旋翼桨盘气动载荷发生显著的波动,不利于飞行操纵;垂直降落过程中,舰船甲板会形成"前低后高"的压力分布特征,倾转旋翼RMS气动载荷值也会明显增加,降低了着舰安全性,且右旋翼RMS气动载荷值比左旋翼平均大一倍以上,这也表明右旋翼面临着更加严峻的气动环境。     

基于薄膜热电堆的新型高温瞬态热流密度传感器的研制

目前针对国内薄膜瞬态热流传感器一致性较差、制备工艺不成熟等问题，提出了一种基于光刻工艺和离子束溅射镀膜工艺的制备方法，200对T型金属薄膜热电偶沉积在10mm×10mm的水冷块上，测量1μm的氧化铝热阻层温差，从而得到瞬态热流密度值。对新型高温瞬态热流密度传感器进行比对法标定，一致性误差为0.211%，即工艺的一致性约为99.79%。实验表明，研制的新型高温瞬态热流密度传感器的一致性好,制备工艺具备良好重复性和可移植性，能够满足高温瞬态热流检测需要，为热流传感器的推广应用及标准化、批量化生产提供了良好的技术支撑。     

固体超强酸TiO2/SO2-4催化合成苹果酯-B

使用TiO2/SO2-4为催化剂,催化乙酰乙酸乙酯和1,2-丙二醇反应合成苹果酯-B.结果表明:使用该催化剂1.0 g,乙酰乙酸乙酯(0.077 mol)与1,2-丙二醇摩尔比为1∶1.2,环己烷15 ml,反应2.5 h,苹果酯-B产率达73%.产品经理化检验确认.     

固态染料敏化太阳能电池用聚苯胺-乙炔黑空穴导体的制备

以粘土状的聚苯胺-乙炔黑导电材料为空穴导体,制备了固态染料敏化太阳能电池.研究结果表明,将乙炔黑颗粒加入到聚苯胺电解质中,可明显提高该固态染料敏化太阳能电池的光电转换效率.这是由于加入的乙炔黑不仅可以提高聚苯胺电解质的空穴迁移率,改善其可润湿性,而且加强了电解质与光阳极以及对电极之间的界面接触性.最后,加入50%乙炔黑的聚苯胺电解质的电池光电转换效率达到了液态电池的48%.因此,聚苯胺-乙炔黑复合电解质可以作为有效的空穴导体材料,应用到固态染料敏化太阳能电池中.     

亚音扩压器壁面开槽技术的试验研究

 1.引言 流场分离控制技术是寻求有关装置性能改善的一个重要途径。本文探讨的亚音扩压器壁面局部开槽技术是多种附面层分离控制方法中的一种,早在60年代初就做了试验研究,至70年代中期,研究仍限于直壁扩压器内和对总体性能的测定及分析。之后,1983年就钝头体后体开槽从减阻角度对外流进行了试验研究,并对分离的控制现象提出了较形象的解释。本文     

侧滑边条翼旋涡和气动特性实验研究

本文综合一组小展弦比边条翼实验研究结果,给出不同展弦比机翼前缘脱体涡系变化,并分析涡绞合及破裂对气动特性的影响。研究表明,侧滑使机翼迎风侧涡绞合推迟,涡提前破裂,背风侧正好相反。侧滑时不对称涡破裂对气动特性影响显著。