针对异物夹杂类缺陷的双道偏置补焊方法

异物夹杂类缺陷是搅拌摩擦焊接过程中一类典型缺陷。一旦发生该类缺陷,只有对焊缝进行挖排来去除异物后,才能实施补焊。针对挖排造成焊缝材料缺失,现有的方法是通过熔焊或赛填固体颗粒来进行填充。上述方法不仅会在焊缝中引入有异于母材的材料,而且工艺过程繁琐。特别是熔焊的焊接热会对补焊区域周围的母材造成影响,从而造成补焊接头强度的削弱。针对现有补焊方法的不足,本文提出一种双道偏置补焊方法,实施过程简便,可实现等强度补焊。经试验证明,该方法可获得与原始焊缝具有相等强度的补焊焊缝。     

卫星控制系统测试数据自动判读系统设计

针对卫星控制系统测试数据类型多和数据量大的特点,人工判读方式存在判读时间长和判读精度不够高等不足,分析了卫星控制系统测试数据的变化规律,建立了测试数据的判读规则,在此基础上完成自动判读方法设计和自动判读系统设计,该系统能够按照设置的判读规则进行自动判读,对判读结果进行实时显示和存储,提高了测试效率和判读的准确性.     

基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分,产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料,归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准,将大幅提高测量准确度和稳定性,结合量子效应的微加工技术实现芯片尺度的测量等,微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

基于OPC技术和Windows DNA-M结构的制造信息监视技术研究

针对传统的制造信息监视系统中底层通信接口的不一致性，并基于Web应用的组件化需求，提出了基于OPC技术和Windows DNA—M结构的制造信息监视技术。首先论述了Windows DNA—M的体系结构和特性，探讨了OPC和XML在系统集成框架中的应用．枸建了基于OPc和xML技术的Windows DNA—M结构，详细描述了自行开发的基于OPC技术和Windows DNA—M体系的多层分布式制造信息监视系统实现的关键技术，最后通过该技术在某制造企业DNC系统设备状态信息监视中的成功应用，验证了基于OPC技术和Windows DNA—M结构的制造信息监视系统具有良好的柔性。     

轴向柱塞泵滑靴副传热特征

为了揭示轴向柱塞泵滑靴底面油膜温度场分布规律,分析了滑靴副生热机理以及热量传递途径,在此基础上利用热流量守恒定律建立滑靴副热力学耦合模型,讨论不同压力和转速工况下滑靴的结构参数对滑靴底面油膜温度的影响。分析结果表明,滑靴副油膜温度场呈不均匀分布,沿滑靴半径方向呈递减趋势,其最大值出现在最薄油膜厚度区域,容易引起滑靴偏磨磨损,主要集中在泵的排油区;恒压高速工况下滑靴内外半径比范围为1.5~2.0 之间,应尽量取较小值,降低滑靴副油膜温度,提高滑靴副润滑性能;恒转速高压工况下阻尼管长度直径比范围为3.50~8.75之间,应尽量取较小值,防止滑靴底面油膜温度过高,改善柱塞泵的散热效果。      

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

2009年日食对航天器光照条件影响分析

2009年7月22日,我国长江流域自西向东发生了一次超长时间的日全食。根据日食产生的机制及几何特征,分析了日食对航天器光照条件影响,并给出了典型地球轨道航天器算例。     

热试验中红外热像仪低温测量能力分析及试验验证

文章分析了红外热像仪在航天器热试验中对低温目标的测温能力不足问题,采用红外干扰消减以及分段辐射定标/分段线性函数拟合的方式,初步解决了红外热像仪在真空低温环境下对低温目标的测量受限的问题。文章的研究结果有助于改进红外热像仪在真空低温环境下的非接触温度测量工作。     

人民币汇率制度选择文献综述

人民币汇率制度选择问题一直是我国进行人民币制度建设的核心问题,其关乎着我国货币的主权和金融经济的独立和稳定,更关乎着我国内外经济的均衡和经济的增长。关于人民币汇率制度选择这一命题,国内外学者作了大量的研究,对这些学者的研究成果进行梳理,有助于我们更好地研究人民币汇率制度选择问题,从而整体把握人民币汇率制度。     

制样压应力对显微拉曼光谱法获取碳材料结构参数的影响

为了研究金相制样过程中压应力对获取碳材料拉曼特征参数R的影响,对不同温度处理的碳纤维和树脂碳进行了研究.结果表明,制样过程中的压应力对准确获取碳材料的拉曼特征参数具有一定的影响,尤其是对经过高温处理硬度较小的碳材料的影响更大,造成了碳材料R的增大.建议在制备碳材料的显微拉曼光谱测试试样时采用较小的压应力.