英语大班教学管理策略

在分析了大班教学的优势及不利因素之后,综合国内外研究动态,从有效分组、多种方式促进师生及生生之间的交流、丰富课外活动、加强课后及作业管理、合理应用多种测试手段等方面提出了英语大班教学管理策略。     

PREDICTION OF SURFACE ROUGHNESS FOR END MILLING TITANIUM ALLOY USING MODIFIED PARTICLE SWARM OPTIMIZATION LS-SVM

It is difficult to construct the prediction model for titanium alloy through analyzing the formation mecha- nism of surface roughness due to the complicated relation between influential factors and surface roughness. A no- vel algorithm based on the modified particle swarm optimization （PSO） least square support vector machine （LS- SVM） is proposed to predict the roughness of the end milling titanium alloys. According to Taguchi method and features in milling titanium alloys, the influences of cutting speed, feed rate and axial depth of cut on surface roughness are investigated with the analysis of variance （ANOVA） of the experimental data. The research results show that the construction speed of the modified PSO LS-SVM model is two orders of magnitude faster than that of back propagation（BP） model. Moreover, the prediction accuracy is about one order of magnitude higher than that of BP model. The modified PSO LS-SVM prediction model can explain the influences of cutting speed, feed rate and axial depth of cut on the surface roughness of titanium alloys. Either a higher cutting speed, a lower feed rate or a smaller axial depth of cut can lead to the decrease of surface roughness.     

单音干扰下扩频测控信号伪码跟踪性能研究

扩频测控信号的伪码跟踪性能直接关系到测控系统的测距精度。以伪码跟踪环中鉴相曲线平衡点的过零偏移为研究对象,推导了音频干扰条件下扩频测控信号伪码跟踪的干扰最大误差;并针对干扰最大误差需考虑具体鉴相算法的特点,提出基于相关曲线主瓣的二阶中心矩扩展因子的性能评价方法。该方法利用伪码相关曲线主瓣在干扰前后的畸变情况,反映干扰对伪码跟踪性能的影响。仿真分析表明,干扰最大误差的理论及仿真结果和二阶中心矩扩展因子所得结论一致,从而验证了干扰最大误差理论的正确性以及所提性能指标的有效性。     

Bacterial growth at the high concentrations of magnesium sulfate found in martian soils

The martian surface environment exhibits extremes of salinity, temperature, desiccation, and radiation that would make it difficult for terrestrial microbes to survive. Recent evidence suggests that martian soils contain high concentrations of MgSO? minerals. Through warming of the soils, meltwater derived from subterranean ice-rich regolith may exist for an extended period of time and thus allow the propagation of terrestrial microbes and create significant bioburden at the near surface of Mars. The current report demonstrates that halotolerant bacteria from the Great Salt Plains (GSP) of Oklahoma are capable of growing at high concentrations of MgSO? in the form of 2 M solutions of epsomite. The epsotolerance of isolates in the GSP bacterial collection was determined, with 35% growing at 2 M MgSO?. There was a complex physiological response to mixtures of MgSO? and NaCl coupled with other environmental stressors. Growth also was measured at 1 M concentrations of other magnesium and sulfate salts. The complex responses may be partially explained by the pattern of chaotropicity observed for high-salt solutions as measured by agar gelation temperature. Select isolates could grow at the high salt concentrations and low temperatures found on Mars. Survival during repetitive freeze-thaw or drying-rewetting cycles was used as other measures of potential success on the martian surface. Our results indicate that terrestrial microbes might survive under the high-salt, low-temperature, anaerobic conditions on Mars and present significant potential for forward contamination. Stringent planetary protection requirements are needed for future life-detection missions to Mars.     

蜂窝夹层结构板的改制技术

基于同一公用平台卫星舱体蜂窝夹层结构板的外形和机械接口大致相同的特点,介绍了一种卫星舱体壁板的改制技术,采用切割、填充、加强、制孔、后埋等工艺方法,将结构星产品改制为电性星产品,能够大大降低成本,缩短周期。     

Study on Conceptual Selection for Provision of Trainers in Primary and Intermediate Training Stage

为了在初/中级教练机装备方案决策中体现出训练需求,选用质量功能展开的方法对其进行了分析.先利用比较矩阵确定训练需求重要度,建立训练需求与能力属性之间的QFD关系矩阵,得到不同能力属性的重要度,最后计算出个方案的能力属性值,通过线性加权计算将属性值反映到不同方案对于训练需求的满足程度上来,得出了量化分析的结果,为教练机装备决策方法研究提供了一个新思路.     

商用喷气式飞机DMC分析模型应用研究

首先对影响民机维修成本的要素进行了讨论,并给出一些飞机维修成本数据。然后归纳总结了欧美多种飞机维修成本计算方法。最后,通过算例进行比较分析,确定出一种符合国内市场情况的DMC计算方法用于型号初步设计,工程实践表明该方法符合中国市场情况,并给出未来的研究方向。     

民用客机增升装置气动噪声研究进展

随着民用飞机数量的快速增加,航空噪声问题日益引起世界范围的关注。增升装置作为重要的机体噪声源之一以其流动复杂性和声源多样性成为民用航空气动声学的难点之一,欧美各国为此开展了大量的研究。总结了增升装置气动噪声的产生机理以及控制措施的研究现状,在此基础上还特别关注了目前工业部门气动与声学的设计思想及需求。     

翼身组合体的变可信度优化设计

基于信赖域思想,发展了一种变可信度优化设计方法组织和管理不同可信度模型,有效利用低可信度模型建立近似模型,进行优化设计,高可信度模型仅修正优化近似模型,使最终优化结果收敛到高可信度模型上.采用全位势边界层有粘无粘迭代方法作为低可信度模型,多重网格Navier-Stokes方程方法作为高可信度模型,对翼身组合体进行优化设计,优化结果表明:发展的变可信度优化方法优化效率高,且能保证优化精度,具有实际的工程应用价值.     

不同迎角的翼型气弹特性风洞实验研究

基于可在不同迎角下作沉浮、俯仰两自由度运动的翼段振动装置,在低速风洞中分别针对普通薄翼型NA-CA0012和风力机翼型NREL S809进行气动弹性测试,得到不同实验状态的气动弹性振动时域响应。分别观察到经典颤振和失速颤振现象,并证明了迎角改变对两种翼型颤振特性的影响。