Progress on Space Solar Telescope in 2002-2004

The progress on Chinese Space Solar Telescope (SST) in 2002-2004 is introduced. The documentations on plans and outlines based on the standards of Chinese aerospace industry for SST mission has been fulfilled. The key technical problems of SST satellite platform and payloads are tackled during pre-study stage of the mission. The laboratory assembly and calibration of the main optical telescope of 1.2 m spherical mirror and 1 m plain mirror have been carried out with the accuracy of λ/40 and λ/30, respectively. The prototype at 17.1 nm for extreme ultraviolet telescope is under development and manufacture with a diameter of 13 cm. Its primary and secondary mirrors have a manufacturing error of 5nm with a roughness degree of less than 0.5 nm and a multiplayer reflection factor of better than 20%. The on-board scientific data processing unit has been developed. Prototypes for other payloads such as H and white light telescope, wide band spectroscopy in high energy and solar and interplanetary radio spectrometer have been developed accordingly.     

飞机发动机冷气道与隔热层的耦合传热分析

数值研究了某飞机发动机外侧冷气道与隔热层的耦合传热过程。采用低雷诺数k-ε模型与SIMPLEC算法计算通道内可压缩变物性气流的湍流对流换热,采用蒙特卡罗法求解通道壁面间的辐射换热。通道内气流湍流对流换热、壁面间辐射换热与隔热层内导热耦合求解。通过模拟计算,分析了通道与隔热层的耦合传热机制,考察了相关参数的影响。结果表明,在所考虑的通道结构与空气流条件下,冷气道外环壁面的温度高于气流温度,气流对内外环壁面均起冷却作用;在隔热层参数不变条件下,壁面间的辐射换热与气流的对流冷却是该传热过程的控制机制,增大冷气流量、降低壁面发射率均可显著降低隔热层的外壁面温度。     

Investigations of an integrated angular velocity measurement and attitude control system for spacecraft using magnetically suspended double-gimbal CMGs

This paper presents an integrated angular velocity measurement and attitude control system of spacecraft using magnetically suspended double-gimbal control moment gyros (MSDGCMGs). The high speed rotor of MSDGCMG is alleviated by a five-degree-of-freedom permanent magnet biased AMB control system. With this special rotor supported manner, the MSDGCMG has the function of attitude rate sensing as well as attitude control. This characteristic provides a new approach to a compact light-weight spacecraft design, which can combine these two functions into a single device. This paper discusses the principles and implementations of AMB-based angular velocity measurement. Spacecraft dynamics with DGMSCMG actuators, including the dynamics of magnetically suspended high-speed rotor, the dynamics of inner gimbal and outer gimbal, as well as the determination method of spacecraft angular velocity are modeled, respectively. The effectiveness of the proposed integrated system is also validated numerically and experimentally.     

建筑物温度场红外测试的研究

研究了采用红外热像图快速测试建筑物外表面温度场的方法，提出了一种基于信息融合的修正方法。     

星载大型不规则回转体的动平衡设计仿真

文章将不规则回转体旋转中心处的约束反力和力矩作为模型动平衡特性的判定依据,借助运动学仿真软件ADAMS,进行了结构动平衡设计的仿真分析。分析了回转体静平衡和动平衡的关系,推导了回转体要实现动平衡所需的条件,给出了回转体静平衡和动平衡的评价标准,讨论了回转体模型质量分布与配平结果之间的相位关系。动平衡设计前后结构动平衡特性的对比显示,动平衡设计后,回转体旋转中心处的扰动力和扰动力矩明显减小,结构动平衡特性显著改善。     

阻尼器叶间布置的旋翼动态摆振角分析

阻尼器的主要作用是提供摆振方向的约束刚度和约束阻尼,然而,叶间布置的阻尼器在集合型整体振动不提供摆振刚度和阻尼,这样,桨毂支臂的摆振角度会大一些。为了避免桨毂支臀碰撞桨毂中央件,需要对旋翼桨叶摆振角度进行详细的计算,并进行合理的设计。但是,旋翼摆振角受直升机飞行状态、过载系数、重心位置等因素的影响,属于多约束条件的动态非线性问题,本文介绍了一种通过数值仿真计算直升机旋翼摆振角的工程设计方法和思路。     

THE DGW-I FURNACE A MATERIALS PROCESSING FACILITY IN "SZ-2" SPACECRAFT

The DGW-I is a new material processing facility developed in China, which was firstly carried into orbit in November 1999 by the SZ-1 spacecraft and then in January 2001 carried by SZ-2 into space again, and successfully processed 6 samples of materials, including 3 samples of alloys, 2 of semiconductors and 1 sample of oxide crystal.     

复合材料主桨叶生产过程中的质量检测和试验验证方法

主桨叶作为直升机的关键部件,其生产质量直接关系到直升机的安全,因此在桨叶生产的全过程中,必须对其进行全面的质量检测和试验验证,从而确保生产出的桨叶符合设计要求。首先介绍了EC175复合材料主桨叶的内部结构,然后介绍了其整个生产过程中的质量检测和试验验证方法。     

积分型Cauchy中值定理的逆问题

主要讨论了积分型Cauchy中值定理的逆问题.推广了文献[3]的部分结果,并在文献[3]的基础上进一步研究了在不同条件下积分型Cauchy中值定理的逆问题的成立情况.     

自动钻铆机校准技术新方法研究

根据国内各飞机制造企业对自动钻铆机的校准新需求,同时参考波音公司D6-56617技术规范,对飞机制造企业所拥有的自动钻铆机进行了校准新方法的研究。增加了转轴轴线与转台的垂直度、下铆头与转轴的同轴度等校准环节,从而保证了自动钻铆机各参数的量值准确。