高校教师教学质量评价体系及方法初探

教学质量是高校的生命线。但由于在考核制度中片面强调科研的重要性，缺乏科学的教学质量评价体系和方法。很多高校教师对教学投入的主动性和积极性不高，教学质量的监控已经是高校管理中一个很棘手的难题，教学质量的下滑已成为人们普遍关心的问题。根据当前高校教师教学质量评价体系和方法的现状，提出了高校教师教学质量评价体系的全面性和综合性，教学质量评价方法的多维性和动态性的观点。     

基于Solid Works和Cosmos的模具结构三维设计及有限元分析

复杂结构注塑模具的设计和强度、刚度分析是注塑行业的重要难题。利用Solid Works三维设计软件实现了注塑模具的三维实体建模，并运用COSMOS／Works软件对注塑模具的典型部件进行了有限元分析，验证设计的零件是否符合实际工作情况是实现注塑模具现代化设计的重要途径。通过GearTrax2001Plus、Toolbox等外挂、内挂插件的使用．大大地简化了建模过程，克服了原有设计方法的不足．为解决较复杂的结构设计和理论分析问题提供了一种新的途径。     

SINS／GPS组合系统的蒙特卡洛仿真

以考虑位置误差相关项的伪距率观测模型，对遥感中使用的SINS/GPS为距、伪距率组合系统进行了蒙特卡洛仿真。结果表明，组合系统的长期位置精度能达到5m以内；GPS数据更新率低于SINS，在GPS测量时间间隔内，组合系统的性能仅由SINS决定，虽然SINS的误差随时间积累，但在GPS测量时间间隔为秒数量级的情况下，即使采用中等精度的惯性的误差随时间积累，但在GPS测量时间间隔为秒数量级的情况下，即使采用中等精度的惯性仪表，其相对位置精度可达到厘米级（这里相对位置精度指组合系统在GPS测量时间间隔内位置误差的变化范围）。     

危害性分析中的模糊数学方法

利用模糊集合理论对影响故障模式危害性的各因素进行了模糊化处理，建立了故障模式危害性评定的模糊评判模型，并阐述了模糊评判方法的基本步骤。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

三维自适应终端滑模协同制导律

针对多枚导弹协同作战的问题,且多枚导弹之间保持有向拓扑通信的条件下,基于终端滑模法设计了视线方向及视线法向的双层协同制导律。其中,视线方向的制导指令能够保证导弹同时完成拦截任务;视线法向上的三维制导律能够保证每枚导弹以期望的视线角攻击目标,从而发挥各枚导弹的最大杀伤力,并且视线角的约束相当于规划了末制导段导弹的弹道问题,在一定程度上避免攻击目标前导弹间发生碰撞。同时,针对所设计的滑模制导律设计了新的自适应律,从而加快了滑模面的收敛速度并且削弱了由符号函数引起的系统抖振现象。基于李雅普诺夫稳定性理论,证明了所设计制导律的正确性,并在最后给出了数学仿真实验,验证了所设计制导律的有效性及优越性。     

院系两级管理模式下高职院校教学运行经费管理的实践与探索

高职院校的院系两级管理模式是一种不同于高校传统管理方式的新的资源配置模式，其核心是降低管理重心、下放管理权力、调整管理跨度、规范管理行为，真正建立起学院宏观调控、系部（二级学院）级部门自主办学的运行机制。院系两级管理的核心是财务的两级管理，文章从高职院校内部运行经费管理为突破口对财务的两级管理进行了一系列的改革和探索。