A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

Space Weather Service for Chinese Space Science Satellites

Strategic Priority Research Program on Space Science has gained remarkable achievements. Space Environment Prediction Center (SEPC) affiliated with the National Space Science Center (NSSC) has been providing space weather services and helps secure space missions. Presently, SEPC is capable to offer a variety of space weather services covering many phases of space science missions including planning, design, launch, and orbital operation. The service packages consist of space weather forecasts, warnings, and effect analysis that can be utilized to avoid potential space weather hazard or reduce the damage caused by space storms, space radiation exposure for example. Extensive solar storms that occurred over Chinese Ghost Festival (CGF) in September 2017 led to a large enhancement of the solar energetic particle flux at 1 AU, which affected the near Earth radiation environment and brought great threat to orbiting satellites. Based on the space weather service by SEPC, satellite ground support groups collaborating with the space Tracking, Telemetering and Command system (TT&C) team were able to take immediate measures to react to the CGF solar storm event.      

一种新型弱撞击对接机构运动学分析

目前各国在轨应用的对接机构属于硬碰撞式对接机构,在此构型下两航天器在空间进行碰撞接触时撞击能量较大,并且此结构下目标飞行器的对接范围较窄。随着空间探测任务的深入,需要对对接机构提出更高层次的设计要求,因此弱撞击对接机构也将成为空间探测任务中一项重要的研究方向。本文对弱撞击对接机构运动学的正解和反解进行了研究分析,得到了相应的推导公式,并通过MATLAB软件对其进行了算例校验。求解出了对接环运动速度和执行推杆伸出速度的关系,这对弱撞击对接机构的工程研制有很大的应用价值。     

柔性铰链放大式超磁致伸缩致动器磁弹耦合模型

针对超磁致伸缩致动器(GMA)输出位移有限的问题,采用柔性铰链放大机构放大GMA输出位移,利用材料力学理论、拉格朗日动力学方程和有限元法对柔性铰链放大机构的位移放大倍数、动力学特性进行了分析.结合Jiles-Atherton(J-A)模型和二次畴转模型建立了柔性铰链放大式GMA的磁弹耦合模型,并在软件AMESim&Simulink联合仿真环境中进行了数值仿真.制作了柔性铰链放大式GMA样机,对其进行了动态性能实验,仿真和实验表明:经过放大,柔性铰链放大式GMA输出位移可以达到0.4mm;频带宽超过100Hz;所建立的磁弹耦合模型是有效的.      

基于放大因子与Spalart-Allmaras湍流模型的转捩预测

为了验证放大因子输运方程与Spalart-Allmaras(S-A)湍流模型耦合对转捩现象的模拟精度,选取Schubauer and Klebanoff(S-K)平板、S809低速翼型、30p30n多段翼型以及复杂的三维HiLiftPW-1构型进行自由转捩计算,并将计算结果与实验进行比较分析,其中针对S809算例,还与Langtry-Menter(L-M)转捩模型进行了比较.算例结果表明:放大因子输运方程与S-A湍流模型的耦合能够较好的捕捉转捩位置以及转捩发展过程,对分离泡诱导的转捩的模拟相比L-M转捩模型更精确,转捩位置的捕捉精度提升了10%;对比实验,多段翼转捩位置的捕捉误差最大为6.5%;针对三维高升力增升构型,以实验作为参考,全湍流计算与考虑边界层转捩的对比显示考虑边界层转捩能够更加精确的模拟气动力系数,升力和表面摩擦阻力系数的模拟精度精度提升1%.      

非合作目标拖拉式对接机构设计与分析

针对非合作目标对接技术的要求和特点,提出了一种以卫星远地点喷管为对接接口的非合作目标拖拉式对接机构方案。设计了拖拉式对接机构的具体结构并建立其三维CAD模型,根据此模型,对机构进行了包络范围的求解;使用ADAMS软件对机构进行了动力学仿真,分析了对接过程中目标星与机械臂的动态特性,分析了对接过程中捕获力与关节受力情况。计算与仿真结果表明,提出的对接机构能够对目标进行有效、可靠的对接捕获,碰撞接触力小于280N,不会造成本体及目标的破坏。与以往对接机构相比,此拖拉式对接机构具有结构简单、可靠性高、捕获范围大、控制方法简单等优点,且机构受力合理,适合作为空间非合作目标对接的捕获装置。     

ROPP反演软件算法及其精度分析

介绍了ROPP反演软件中无线电掩星反演的算法与精度分析. 采用COSMIC卫星2008年1 月1日全天的附加相位数据, 反演得到折射率、温度、压强与湿度等参数, 并与CDAAC 相应结果进行对比. 实验结果表明, 在30km高度以下, 折射率、压强和湿度的相对 误差在2%以内, 温度误差不超过2K.      

含湿气流单缝冲击冷却数值模拟

对饱和湿空气夹带液滴的含湿气流单缝冲击冷却进行了数值模拟,比较研究了含湿气流中液滴相变换热/液滴载量比和单缝射流几何参数对强化换热效果的影响,研究发现:气流中液滴的加入对冷却效果的影响十分显著,热流密度为8000W/m2的条件下,空气中注入5%的液滴会比饱和湿空气对驻点区的冷却效果提高90%,当液滴载量比从1%提高到5%,冲击驻点区局部传热系数提高了32%;而合适的缝宽和冲击高度也是影响冷却效果的重要因素,在该条件下冲击高度与缝宽的比值为4.55时冲击冷却效果最佳.