装备保障链敏捷性评价的指标体系及方法

装备保障链敏捷性评价是装备保障链敏捷化的先行条件。提出了装备保障链敏捷性的概念,建立了装备保障链整体和单元敏捷性的评价指标体系,并综合运用群体层次分析法和模糊综合评价方法对装备保障链敏捷性进行评价。研究结果为我军构建敏捷的装备保障链提供了理论与方法支持。     

基于粒子群优化的航路规划算法研究与仿真

文章将粒子群优化方法应用于飞机低空突防航路规划技术研究,提出了利用一组正弦波曲线来构造一个粒子,并在适应度函数设计巾加入处罚函数,使该方法得到的飞行航线严格经过起始点和目标点,而且满足飞机的机动性能要求,以及起始航向角与目标进入角的要求。仿真结果表明,所用方法简便可行,粒子能较快地收敛于全局最佳航路。     

一种基于LabVIEW的航空电缆断路故障检测系统

利用LabVIEW软件开发平台设计和研制的一种航空电缆断路检测系统,可完成数据库查询、数据分析、结果显示和存储。利用工控机中的电缆资料数据库,再结合检测电路等相应的硬件,该系统即可自动给出断开电缆的连接关系。应用表明,该系统可快速检测出损伤电缆的连接关系,检测结果准确、可靠。     

内通道交错横流对气膜冷却效率的影响

采用数值模拟研究了内通道横流对气膜流动和冷却特性的影响,参数变化范围:横流比Cr=0.39,0.78;吹风比Br=1,2;气膜孔长径比l/d=4,8.计算结果表明:①内通道冷气横流使得气膜孔内气流产生较强的涡旋,使得冷气射流的流动具有明显的非对称特征,引起表面气膜冷却效率分布不均;②横流比对表面气膜冷却效率分布影响较大,横流比越大,气膜孔内涡旋越强烈,气膜冷却效率分布越不均匀;③长径比较大时,气膜孔内气流较为规整,气膜覆盖区域较为狭小,气膜冷却效率分布更加不均;吹风比较大时,射流在主流通道上的附着较差,气膜冷却效率较低.      

气动计算软件集成系统后处理接口开发

研究了CGNS数据标准及其数据结构,采用Tecplot的可视化功能及其宏命令作为开发工具进行后处理接口的开发.接口实现了读入CGNS文件后区分物面、对称面,多窗口显示,绘制云图或等值线,计算给定参考值下的压力系数并将计算结果插入Tecplot数据中等功能.结果表明,后处理接口统一了数据的输出格式,实现了自动绘制,方便了计算结果的后处理和分析.     

一种共轴双旋翼式火星飞行器设计及其试验验证

针对火星飞行器探测需求,提出了一种共轴双旋翼式火星飞行器,基于计算流体力学方法优选了桨叶翼型、平面形状和扭转角等结构参数,基于叶素动量理论建立了旋翼气动力学模型,利用数值模拟方法选择了旋翼转速、旋翼间距和桨叶安装角等飞行参数,设计了原理样机"火星飞鸟-I"的结构与控制系统。构建了火星大气环境模拟器和重力补偿与运动约束装置,开展了模拟火星环境下旋翼式飞行器地面飞行试验,验证了共轴双旋翼式火星飞行器的推进性能,展望了旋翼式火星飞行器技术的发展方向。研究成果对我国开展的火星探测工程具有重要借鉴价值。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

锈层对过冷沸腾换热影响的实验及数值研究

针对锈层对过冷沸腾换热冷却效果的影响，本文进行了理论分析、实验研究和仿真校验。首先结合经典的过冷沸腾换热理论，分析了锈层对冷却效果影响最大的几个因素。然后进行了一组夹套内壁生锈和未生锈两种情况下冷却效果的对比实验。实验发现，内壁生锈造成入口段温度大幅升高，且温升沿流道方向递次减小。接着分析了造成该现象的几大因素，推断锈层影响了流态进而抑制了沸腾换热机制是最主要的因素，并对不同入口流态下管内沸腾换热进行数值仿真，校验了上述分析结果。最后，根据研究结论，对过冷沸腾换热中易生锈或类似的粗糙内壁槽道的设计方法提出了建议。