航天器结构材料的应用和发展

文章首先说明航天器结构材料的定义及其性能要求，然后简要介绍航天器结构材料的主要类型及其基本性能，并且综述航天器结构材料的应用概况，最后指出航天器结构材料的发展趋势。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

Bubble detector characterization for space radiation

In light of the importance of the neutron contribution to the dose equivalent received by space workers in the near-Earth radiation environment, there is an increasing need for a personal dosimeter that is passive in nature and able to respond to this neutron field in real time. Recent Canadian technology has led to the development of a bubble detector, which is sensitive to neutrons, but insensitive to low linear energy transfer (LET) radiation. By changing the composition of the bubble detector fluid (or “superheat”), the detectors can be fabricated to respond to different types of radiation. This paper describes a preliminary ground-based research effort to better characterize the bubble detectors of different compositions at various charged-particle accelerator facilities, which are capable of simulating the space radiation field.     

Raman imagery: a new approach to assess the geochemical maturity and biogenicity of permineralized precambrian fossils

Laser-Raman imagery is a non-intrusive, non-destructive analytical technique, recently introduced to Precambrian paleobiology, that can be used to demonstrate a one-to-one spatial correlation between the optically discernible morphology and kerogenous composition of permineralized fossil microorganisms. Made possible by the submicron-scale resolution of the technique and its high sensitivity to the Raman signal of carbonaceous matter, such analyses can be used to determine the chemical-structural characteristics of organic-walled microfossils and associated sapropelic carbonaceous matter in acid-resistant residues and petrographic thin sections. Here we use this technique to analyze kerogenous microscopic fossils and associated carbonaceous sapropel permineralized in 22 unmetamorphosed or little-metamorphosed fine-grained chert units ranging from approximately 400 to approximately 2,100 Ma old. The lineshapes of the Raman spectra acquired vary systematically with five indices of organic geochemical maturation: (1) the mineral-based metamorphic grade of the fossil-bearing units; (2) the fidelity of preservation of the fossils studied; (3) the color of the organic matter analyzed; and both the (4) H/C and (5) N/C ratios measured in particulate kerogens isolated from bulk samples of the fossil-bearing cherts. Deconvolution of relevant spectra shows that those of relatively well-preserved permineralized kerogens analyzed in situ exhibit a distinctive set of Raman bands that are identifiable also in hydrated organic-walled microfossils and particulate carbonaceous matter freed from the cherts by acid maceration. These distinctive Raman bands, however, become indeterminate upon dehydration of such specimens. To compare quantitatively the variations observed among the spectra measured, we introduce the Raman Index of Preservation, an approximate measure of the geochemical maturity of the kerogens studied that is consistent both with the five indices of organic geochemical alteration and with spectra acquired from fossils experimentally heated under controlled laboratory conditions. The results reported provide new insight into the chemical-structural characteristics of ancient carbonaceous matter, the physicochemical changes that accompany organic geochemical maturation, and a new criterion to be added to the suite of evidence by which to evaluate the origin of minute fossil-like objects of possible but uncertain biogenicity.     

Thrust modulation of solid propellant rockets by a fluidic vortex valve with secondary combustion

An analytical model for calculation of the thrust and pressure modulation of a solid propellant rocket by means of a fluidic vortex valve with secondary combustion has been developed. Thrust control by the vortex valve method was found superior to the axial injection of control flow. Addition of oxygen in the injected flow improves the energetic performance of the system as well as the thrust modulation capability. Experiments have been conducted using a mixture of nitrogen and oxygen as the injection gas. The two main parameters investigated in a series of experiments were the oxygen percentage in the injection gas and the ratio between the mass flow rates of the control gas and the solid propellant combustion products. The results show an increase of thrust by a factor of 2 for a 25% addition in mass flow rate by secondary injection at optimal conditions.     

Mineralogical biosignatures and the search for life on Mars

If life ever existed, or still exists, on Mars, its record is likely to be found in minerals formed by, or in association with, microorganisms. An important concept regarding interpretation of the mineralogical record for evidence of life is that, broadly defined, life perturbs disequilibria that arise due to kinetic barriers and can impart unexpected structure to an abiotic system. Many features of minerals and mineral assemblages may serve as biosignatures even if life does not have a familiar terrestrial chemical basis. Biological impacts on minerals and mineral assemblages may be direct or indirect. Crystalline or amorphous biominerals, an important category of mineralogical biosignatures, precipitate under direct cellular control as part of the life cycle of the organism (shells, tests, phytoliths) or indirectly when cell surface layers provide sites for heterogeneous nucleation. Biominerals also form indirectly as by-products of metabolism due to changing mineral solubility. Mineralogical biosignatures include distinctive mineral surface structures or chemistry that arise when dissolution and/or crystal growth kinetics are influenced by metabolic by-products. Mineral assemblages themselves may be diagnostic of the prior activity of organisms where barriers to precipitation or dissolution of specific phases have been overcome. Critical to resolving the question of whether life exists, or existed, on Mars is knowing how to distinguish biologically induced structure and organization patterns from inorganic phenomena and inorganic self-organization. This task assumes special significance when it is acknowledged that the majority of, and perhaps the only, material to be returned from Mars will be mineralogical.     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

Gravitational Interaction of Celestial Bodies and neutron flux bursts from Their Surfaces

The gravitational interaction between the Sun and the planetary solar system gives rise to the well-known tidal waves at the planets. The tidal wave originating in the Earth's crust perpetually transforms the microstructure of the Earth's crust leading to a variation of the concentration of natural radioactive gases in the terrestrial air and to changed conditions of their leakage to the Earth's atmosphere. These variations give rise to bursts of thermal and slow neutrons in the vicinity of the Earth's crust, because the radioactive gases are sources of energetic alpha particles that induce neutron production upon the interaction with the nuclei of elements of the Earth's crust and atmosphere. In this work, the idea of neutron production in the ground coat is extended to the other celestial bodies interacting with one another.     

Dynamics and control of variable-geometry truss structures

Variable-geometry truss structures are likely to be used extensively in the future for in-orbit space construction. This paper considers dynamics formulation and vibration control of such structures. The truss system is modelled as a collection of sub-structures consisting of truss booms, prismatic actuator elements, and in some cases a manipulator at the end. Each truss boom is treated as a separate ‘link’ and its flexibility is modelled using the finite element method. Equations of motion for individual sub-structures are obtained which are then assembled. The non-working constraint forces are eliminated to obtain the equations governing the constrained dynamics of the entire system. For vibration control, the singular perturbation method is employed to construct two reduced-order models, for quasi-static motion and for modal co-ordinates, respectively. Computed torque with PD control is applied to maintain the quasi-static motion, while an optimal LQR method is used for vibration control. Typical simulation results are presented for the planar case.