航空发动机高压旋转涡轮盘腔流动与换热

在同模型实验参数范围内，且数值解和实验解基本吻合的前提下，对发动机原型参数进行数值模拟，求解了旋转系下流体流动与换热微分方程组，通过对气体域和固体域进行共扼计算，并将动量方程与能量方程福合求解。结果表明利用低参数下实验数据支持的数值计算程序对真实参数的模拟是合理的，对于复杂的非线性现象，数值外推法比传统实验外推更加准确。     

使用连续流动法测量高氯酸铵表面积

1、引言为了予测复合固体推进剂的弹道性能,必须要知道推进剂中各组份的粒度或表面积。在塑料型推进剂的制造过程中固体粒子会发生机械破碎,尽管如此,仍发现高氯酸铵的初始表面积与推进剂的弹道性能有关。爆炸物研制公司(ERDE)测量高氯酸铵表面积的作法是采用以空气渗透法为基础的菲希尔(Fisher)筛分机。由于塑料型推进剂中使用的高氯酸铵的比表面积范围通常为1000～9000cm~2/cm~3(0.051～0.46m~2/g),因此,菲希尔法完全能满足这一要求。为了生产较高燃速的推进剂,爆炸物研制公司最近研究的推进剂配方中含有更细的高氯酸铵(9000～10000cm~2/cm~3)。在端羧基聚丁二烯和端羟基聚丁二烯两种橡胶型推进剂中,即     

含硝酸酯增塑剂的固体推进剂的脆化研究

本文介绍硝酸酯增塑的聚醚聚氨酯推进剂在低温贮存中,解决失去应变能力(脆化)问题的研究结果。这种高度增塑的推进剂在低温下短期贮存,几乎完全失去了应变能力。研究这种脆化的原因表明,交联密度以及粘合剂配方是起作用的因素。湿度曾被考虑是因素之一,但实验证明并非如此。实验表明增塑剂结晶是脆变的主要原因但不一定与增塑剂的凝固点有关。重新测定某些增塑剂的凝固点是研究工作的一部份。放入增塑剂晶体增加了推进剂脆变速度。单独采用丁三醇三硝酸酯(BTTN)或是混合增塑剂可以解决这个问题。采用混合增塑剂可以得到最好的低温性能。     

Sleep in space

Manned space flights have shown it is possible to sleep in microgravity. However, some sleep disturbances have been reported which influence performance of the crew and safety of space flight. This paper reviews the main studies of in-flight sleep in animal and man. Most disturbances are related to phase lags due to operational requirements. Factors which can disturb in-flight sleep are analysed: environmental factors. Some of them are secondary to space flight ergonomics. Conversely, effects of microgravity on light-dark alternance are less known and lead to interesting problems of fundamental research, psychological factors, especially during long duration flights.     

Humans to Mars: a feasibility and cost-benefit analysis

Mars is a compelling astrobiological target, and a human mission would provide an opportunity to collect immense amounts of scientific data. Exploration alone, however, cannot justify the increased risk. Instead, three factors drive a human mission: economics, education, and exploration. A human mission has a unique potential to inspire the next generation of young people to enter critically needed science and engineering disciplines. A mission is economically feasible, and the research and development program put in place for a human mission would propel growth in related high-technology industries. The main hurdles are human physiological responses to 1–2 years of radiation and microgravity exposure. However, enabling technologies are sufficiently mature in these areas that they can be developed within a few decade timescale. Hence, the decision of whether or not to undertake a human mission to Mars is a political decision, and thus, educational and economic benefits are the crucial factors.     

Voluntary head stabilization in space during trunk movements in weightlessness

The ability to voluntarily stabilize the head in space during lateral rhythmic oscillations of the trunk has been investigated during parabolic flights. Five healthy young subjects, who gave informed consent, were examined. The movements were performed with eyes open or eyes closed, either during phases of microgravity or phases of normal gravity. The main result to emerge from this study is that the head may be stabilized in space about the roll axis under microgravity conditions with, as well as without vision, despite the reduction of the vestibular afferent and the muscle proprioceptive inputs. Moreover, the absence of head stabilization about the yaw axis confirms that the degrees of freedom of the neck can be independently controlled, as it was previously shown [1]. These results seem to indicate that voluntary head stabilization does not depend crucially upon static vestibular afferents. Head stabilization in space may be in fact organized on the basis of either dynamic vestibular afferents or a postural body scheme.     

大型火箭发动机的壳体粘结问题

大型药柱的壳体粘结很少进行研究,往往成为火箭发动机生产中很困难的问题。当柔软的橡胶与坚硬的金属壳体粘结时,在粘结线上产生应力集中,会使成品发动机变得不能用。推进剂和壳体粘结的常用方法是采用可固化的胶粘剂包复层。业已证明,包复层和推进剂之间必须具有化学相似性才能很好粘结。本文列举了具体体现这一概念的粘结系统实例,并叙述其间有关的特殊化学反应。     

二维热线探针在三维流测量中的应用

从理论和实用两方面对二维热线探针在三维流测量中的应用进行了探索,较全面地考虑了影响热线测量的各种因素;推导出了比较适用的将X型二维探针用于三维流场测量的公式,并进行了实验研究;结果表明,所提供的方法比较简单和方便,利用此法,对三维紊流流场进行了测量,其效果令人满意。