Multi-Target Tracking in Clutter without Measurement Assignment

When tracking targets using radars and sonars, the number of targets and the origin of data is uncertain. Data may be false measurements or clutter, or they may be detections from an unknown number of targets whose possible trajectories and detection processes can only be described in a statistical manner. Optimal all-neighbor multi-target tracking (MTT) in clutter enumerates all possible joint measurement-to-track assignments and calculates the a posteriori probabilities of each of these joint assignments. The numerical complexity of this process is combinatorial in the number of tracks and the number of measurements. One of the key differences between most MTT algorithms is the manner in which they reduce the computational complexity of the joint measurement-to-track assignment process. We propose an alternative approach, using a form of soft assignment, that enables us to bypass this step entirely. Specifically, our approach treats possible detections of targets followed by other tracks as additional clutter measurements. It starts by approximating the a~priori probabilities of measurement origin. These probabilities are then used to modify the clutter spatial density at the location of the measurements. A suitable single target tracking (STT) filter then uses the modified clutter intensity for updating the track state. In effect, the STT filter is transformed into an MTT filter with a numerical complexity that is linear in the number of tracks and the number of measurements. Simulations show the effectiveness of this approach in a number of different multi-target scenarios.     

冷轧体心立方IF钢中剪切带的形成

剪切带是在高应变时冷轧金属中形成的重要微观结构,这种微结构与塑性变形行为有密切关系。本文基于塑性变形理论,运用T ay lor弛豫模型、B ishop和H ill最大功原理,对变形体心立方晶体中滑移系上的切应变分布进行了计算。计算结果表明:当晶粒的轧制方向平行于〈1 1 2〉和轧制面法向平行于〈1 1 1〉冷轧时,几乎全部切应变都能聚集在某一滑移面上,这一高度局域性的切应变是形成剪切带的原因。此时,剪切带与轧制方向之间夹角为35°。而对其他取向的晶体,切应变却呈均匀分布,因而不产生剪切带。透射电子显微镜观察到的剪切带所在晶粒的取向和所在的滑移面证实了这一剪切带的形成机制。     

Amino acid synthesis from CO-N2 and CO-N2-H2 gas mixtures via complex organic compounds.

Reaction among hydrogen cyanide (HCN), formaldehyde (H2CO) and ammonia (NH3) are generally considered an important reaction in amino acid synthesis by electric discharge. Precursors of glycine and aspartic acid were, however, synthesized by adding water to metastable complex compounds produced by quenching a CO-N2 high-temperature plasma. In order to investigate effects of water remaining in an experimental vacuum chamber, optical emission spectroscopic and mass spectrometric measurements were conducted with CO-N2 and CO-N2-H2 gas mixtures. Although residual hydrogen atoms were detected in the CO-N2 experiment, the amount of them was much less than that in the CO-N2-H2 experiment.     

Influence of Simplifying a Geometrical Model of the Gas Turbine Engine Combustion Chamber on the Results of Numerical Modeling

We studied the geometric models of combustion chambers depending on their simplification. It is shown that the error in calculating the parameters does not exceed 8 % under the constraint of the geometrical model of the gas turbine engine (GTE) combustion chamber by an angular sector with a burner device.     

The Ultraviolet Spectrograph on NASA’s Juno Mission

The ultraviolet spectrograph instrument on the Juno mission (Juno-UVS) is a long-slit imaging spectrograph designed to observe and characterize Jupiter’s far-ultraviolet (FUV) auroral emissions. These observations will be coordinated and correlated with those from Juno’s other remote sensing instruments and used to place in situ measurements made by Juno’s particles and fields instruments into a global context, relating the local data with events occurring in more distant regions of Jupiter’s magnetosphere. Juno-UVS is based on a series of imaging FUV spectrographs currently in flight—the two Alice instruments on the Rosetta and New Horizons missions, and the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter mission. However, Juno-UVS has several important modifications, including (1) a scan mirror (for targeting specific auroral features), (2) extensive shielding (for mitigation of electronics and data quality degradation by energetic particles), and (3) a cross delay line microchannel plate detector (for both faster photon counting and improved spatial resolution). This paper describes the science objectives, design, and initial performance of the Juno-UVS.     

利用喷气装置卸载航天器积累角动量的最小工质损耗控制

讨论利用喷气装置卸载航天器积累的外扰角动量过程中 ,实现最小工质损耗的问题。提出了在航天器绕自己质心转动的过程中实现对这一角动量进行卸载的新思路。文中采用极大值原理求得了最优工质损耗并举出了实例     

The Genesis Solar Wind Concentrator: Flight and Post-Flight Conditions and Modeling of Instrumental Fractionation

The Genesis mission Solar Wind Concentrator was built to enhance fluences of solar wind by an average of 20x over the 2.3 years that the mission exposed substrates to the solar wind. The Concentrator targets survived the hard landing upon return to Earth and were used to determine the isotopic composition of solar-wind—and hence solar—oxygen and nitrogen. Here we report on the flight operation of the instrument and on simulations of its performance. Concentration and fractionation patterns obtained from simulations are given for He, Li, N, O, Ne, Mg, Si, S, and Ar in SiC targets, and are compared with measured concentrations and isotope ratios for the noble gases. Carbon is also modeled for a Si target. Predicted differences in instrumental fractionation between elements are discussed. Additionally, as the Concentrator was designed only for ions ≤22 AMU, implications of analyzing elements as heavy as argon are discussed. Post-flight simulations of instrumental fractionation as a function of radial position on the targets incorporate solar-wind velocity and angular distributions measured in flight, and predict fractionation patterns for various elements and isotopes of interest. A tighter angular distribution, mostly due to better spacecraft spin stability than assumed in pre-flight modeling, results in a steeper isotopic fractionation gradient between the center and the perimeter of the targets. Using the distribution of solar-wind velocities encountered during flight, which are higher than those used in pre-flight modeling, results in elemental abundance patterns slightly less peaked at the center. Mean fractionations trend with atomic mass, with differences relative to the measured isotopes of neon of +4.1±0.9 ‰/amu for Li, between ?0.4 and +2.8 ‰/amu for C, +1.9±0.7‰/amu for N, +1.3±0.4 ‰/amu for O, ?7.5±0.4 ‰/amu for Mg, ?8.9±0.6 ‰/amu for Si, and ?22.0±0.7 ‰/amu for S (uncertainties reflect Monte Carlo statistics). The slopes of the fractionation trends depend to first order only on the relative differential mass ratio, Δm/m. This article and a companion paper (Reisenfeld et al. 2012, this issue) provide post-flight information necessary for the analysis of the Genesis solar wind samples, and thus serve to complement the Space Science Review volume, The Genesis Mission (v. 105, 2003).     

Window-Based and Rate-Based Transmission Control Mechanisms over Space-Internet Links

Space communications urgently need an effective transmission control mechanism. This paper presents an experimental, comparative analysis of window-based transmission control, rate-based transmission control, and a hybrid of the two over error-prone, congestion-free, high-latency, point-to-point space communication links simulated using the space-to-ground link simulation (SGLS) test-bed. The results revealed that the traffic shaping mechanism of rate-based transmission protocol is more effective than the bursting flow of window-based protocol over simulated space communication links with a high error rate and a long link delay. The window-based transmission mechanisms show performance degradation due to traffic bursts and frequent packet retransmissions caused by their acknowledgment (ACK)-clocked transmission control algorithms. Pure rate-control is always preferable to other mechanisms in the simulated congestion-free, error-prone, point-to-point, geostationary-Earth orbit (GEO)-space communication channels, and its advantages become more pronounced when the channel rates are asymmetric. The performance differences come from their different behavior in controlling data transmission.     

Understanding high-density matter through analysis of surface spectral lines and burst oscillations from accreting neutron stars

We discuss millisecond period brightness oscillations and surface atomic spectral lines observed during type I X-ray bursts from a neutron star in a low mass X-ray binary system. We show that modeling of these phenomena can constrain models of the dense cold matter at the cores of neutron stars. We demonstrate that, even for a broad and asymmetric spectral line, the stellar radius-to-mass ratio can be inferred to better than 5%. We also fit our theoretical models to the burst oscillation data of the low mass X-ray binary XTE J1814-338, and find that the 90% confidence lower limit of the neutron star’s dimensionless radius-to-mass ratio is 4.2.