Homochirality in an early peptide world

A recently proposed model of non-autocatalytic reactions in dipeptide formation that leads to spontaneous symmetry breaking and homochirality was examined. The model is governed by activation, polymerization, epimerization, and depolymerization of amino acids. Symmetry breaking was determined to result primarily from the different rates of reactions that involve homodimers and heterodimers, i.e., stereoselective reactions, and the fact that epimerization can only occur on the N-terminal residue and not on the C-terminal residue. This corresponds to an auto-inductive cyclic process that works only in one direction. It is argued that epimerization mimics autocatalytic behavior as well as mutual antagonism, both of which are known to be crucial for the production of full homochirality.     

The Cassini Ultraviolet Imaging Spectrograph Investigation

The Cassini Ultraviolet Imaging Spectrograph (UVIS) is part of the remote sensing payload of the Cassini orbiter spacecraft. UVIS has two spectrographic channels that provide images and spectra covering the ranges from 56 to 118 nm and 110 to 190 nm. A third optical path with a solar blind CsI photocathode is used for high signal-to-noise-ratio stellar occultations by rings and atmospheres. A separate Hydrogen Deuterium Absorption Cell measures the relative abundance of deuterium and hydrogen from their Lyman-α emission. The UVIS science objectives include investigation of the chemistry, aerosols, clouds, and energy balance of the Titan and Saturn atmospheres; neutrals in the Saturn magnetosphere; the deuterium-to-hydrogen (D/H) ratio for Titan and Saturn; icy satellite surface properties; and the structure and evolution of Saturn’s rings.This revised version was published online in July 2005 with a corrected cover date.     

Viscoelastic characterization of polymers for deployable composite booms

Deployable space structures are being built from thin-walled fiber-reinforced polymer composite materials due to their high specific strength, high specific stiffness, and designed bistability. However, the inherent viscoelastic behavior of the resin matrix can cause dimensional instability when the composite is stored under strain. The extended time of stowage between assembly and deployment in space can result in performance degradation and in the worst case, mission failure. In this study, the viscoelastic properties of candidate commercial polymers consisting of difunctional and tetrafunctional epoxies and thermoplastic and thermosetting polyimides were evaluated for deployable boom structures of solar sails. Stress relaxation master curves of the candidate polymers were used to predict the relaxation that would occur in 1 year at room temperature under relatively low strains of about 0.1%. A bismaleimide (BMI) showed less stress relaxation (about 20%) than the baseline novolac epoxy (about 50%). Carbon fiber composites fabricated with the BMI resin showed a 44% improvement in resistance to relaxation compared to the baseline epoxy composite.     

Advances in Theory and Simulations of Large-Scale Dynamos

Recent analytical and computational advances in the theory of large-scale dynamos are reviewed. The importance of the magnetic helicity constraint is apparent even without invoking mean-field theory. The tau approximation yields expressions that show how the magnetic helicity gets incorporated into mean-field theory. The test-field method allows an accurate numerical determination of turbulent transport coefficients in linear and nonlinear regimes. Finally, some critical views on the solar dynamo are being offered and targets for future research are highlighted.     

Mupus – A Thermal and Mechanical Properties Probe for the Rosetta Lander Philae

MUPUS, the multi purpose sensor package onboard the Rosetta lander Philae, will measure the energy balance and the physical parameters in the near-surface layers – up to about 30 cm depth- of the nucleus of Rosetta’s target comet Churyumov-Gerasimenko. Moreover it will monitor changes in these parameters over time as the comet approaches the sun. Among the parameters studied are the density, the porosity, cohesion, the thermal diffusivity and conductivity, and temperature. The data should increase our knowledge of how comets work, and how the coma gases form. The data may also be used to constrain the microstructure of the nucleus material. Changes with time of physical properties will reveal timescales and possibly the nature of processes that modify the material close to the surface. Thereby, the data will indicate how pristine cometary matter sampled and analysed by other experiments on Philae really is.     

VLF electromagnetic waves observed onboard GEOS-1

This paper is concerned mainly with the information which can be extracted from frequency-time spectra in the VLF range. The instrument used is the correlator which has a good frequency resolution (50 Hz) and time resolution (30 ms) in one magnetic and one electric component simultaneously. By suitable computer analysis, it is possible for instance to distinguish between the two dominant electromagnetic emissions, hiss and chorus, as well as to display the complete spectra. This treatment is applied to the Survey periods, which are a fixed sequence of modes, repeated every hour on the hour in order to have reference data from GEOS analogous to many ground-based observatories. One result of this treatment obtained already is that hiss and chorus normally appear together, although one or the other may be dominating in intensity. The occurrence rate of these emissions in local time is also given.For continuous surveillance the filterbank data are used. There are 16 frequency filters supplying magnetic and electric amplitude at few different frequencies. Using these data, a storm sudden commencement can be followed with good time resolution (1 s), and an interesting correlation has been found in a few cases between the VLF signal amplitude and the cold plasma density (as measured by the active part of the S-300 experiment).     

A Pre-Landing Assessment of Regolith Properties at the InSight Landing Site

This article discusses relevant physical properties of the regolith at the Mars InSight landing site as understood prior to landing of the spacecraft. InSight will land in the northern lowland plains of Mars, close to the equator, where the regolith is estimated to be \(\geq3\mbox{--}5~\mbox{m}\) thick. These investigations of physical properties have relied on data collected from Mars orbital measurements, previously collected lander and rover data, results of studies of data and samples from Apollo lunar missions, laboratory measurements on regolith simulants, and theoretical studies. The investigations include changes in properties with depth and temperature. Mechanical properties investigated include density, grain-size distribution, cohesion, and angle of internal friction. Thermophysical properties include thermal inertia, surface emissivity and albedo, thermal conductivity and diffusivity, and specific heat. Regolith elastic properties not only include parameters that control seismic wave velocities in the immediate vicinity of the Insight lander but also coupling of the lander and other potential noise sources to the InSight broadband seismometer. The related properties include Poisson’s ratio, P- and S-wave velocities, Young’s modulus, and seismic attenuation. Finally, mass diffusivity was investigated to estimate gas movements in the regolith driven by atmospheric pressure changes. Physical properties presented here are all to some degree speculative. However, they form a basis for interpretation of the early data to be returned from the InSight mission.     

铺层铺叠工艺现状

LAP公司CAD-PRO系列的激光投影设备为航空、船舶、风力发电等行业的碳纤维或剥离纤维增强复合材料构件制造过程中的铺层和元件定位提供了有效工具。