飞机结构环境谱初探

本文给出环境谱的定义及编谱的基本方法。对总体气候/化学环境因素的分布和随时间变化的规律进行了探讨。统计分析了我国各气候区和飞机典型使用地区的总体环境,提供了气温、湿度、太阳辐射、二气化硫,海水盐度及盐雾等国内实测数据。     

单室双推力固体火箭发动机两级推力的最佳选择

从理论上探讨了单室双推力固体火箭发动机中影响其两级推力的主要因素。建立了导弹/发动机一体化设计的优化模型,对一种推进剂实现双推力,双燃速推进剂实现双推力两种情况分别进行了计算和分析。求出了使导弹射程达到最大,又能够在设计中实现的最佳推力方案。     

Galileo Probe Nephelometer experiment

The objective of the Nephelometer Experient aboard the Probe of the Galileo mission is to explore the vertical structure and microphysical properties of the clouds and hazes in the atmosphere of Jupiter along the descent trajectory of the Probe (nominally from 0.1 to > 10 bars). The measurements, to be obtained at least every kilometer of the Probe descent, will provide the bases for inferences of mean particle sizes, particle number densities (and hence, opacities, mass densities, and columnar mass loading) and, for non-highly absorbing particles, for distinguishing between solid and liquid particles. These quantities, especially the location of the cloud bases, together with other quantities derived from this and other experiments aboard the Probe, will not only yield strong evidence for the composition of the particles, but, using thermochemical models, for species abundances as well. The measurements in the upper troposphere will provide ground truth data for correlation with remote sensing instruments aboard the Galileo Orbiter vehicle. The instrument is carefully designed and calibrated to measure the light scattering properties of the particulate clouds and hazes at scattering angles of 5.8°, 16°, 40°, 70°, and 178°. The measurement sensitivity and accuracy is such that useful estimates of mean particle radii in the range from about 0.2 to 20 can be inferred. The instrument will detect the presence of typical cloud particles with radii of about 1.0 , or larger, at concentrations of less than 1 cm³.Deceased.     

Energetic Particles Investigation (EPI)

The Energetic Particles Investigation (EPI) instrument operates during the pre-entry phase of the Galileo Probe. The major science objective is to study the energetic particle population in the innermost regions of the Jovian magnetosphere — within 4 radii of the cloud tops — and into the upper atmosphere. To achieve these objectives the EPI instrument will make omnidirectional measurements of four different particle species — electrons, protons, alpha-particles, and heavy ions (Z > 2). Intensity profiles with a spatial resolution of about 0.02 Jupiter radii will be recorded. Three different energy range channels are allocated to both electrons and protons to provide a rough estimate of the spectral index of the energy spectra. In addition to the omnidirectional measurements, sectored data will be obtained for certain energy range electrons, protons, and alpha-particles to determine directional anisotropies and particle pitch angle distributions. The detector assembly is a two-element telescope using totally depleted, circular silicon surfacebarrier detectors surrounded by a cylindrical tungsten shielding with a wall thickness of 4.86 g cm^-2. The telescope axis is oriented normal to the spherical surface of the Probe's rear heat shield which is needed for heat protection of the scientific payload during the Probe's entry into the Jovian atmosphere. The material thickness of the heat shield determines the lower energy threshold of the particle species investigated during the Probe's pre-entry phase. The EPI instrument is combined with the Lightning and Radio Emission Detector (LRD) such that the EPI sensor is connected to the LRD/EPI electronic box. In this way, both instruments together only have one interface of the Probe's power, command, and data unit.     

CFAR data fusion center with inhomogeneous receivers

Detection systems with distributed sensors and data fusion are increasingly used by surveillance systems. A system formed by N inhomogeneous constant false alarm rate (CFAR) detectors (cell-averaging (CA) and ordered statistic (OS) CFAR detectors) is studied. A recursive formulation of an algorithm that permits a fixed level of false alarms in the data fusion center is presented, to set the optimum individual threshold levels in the CFAR receivers and the optimum `K out of N' decision rule in order to maximize the total probability of detection. The algorithm also considers receivers of different quality or with different communication channel qualities connecting them with the fusion center. This procedure has been applied to several hypothetical networks with distributed CA-CFAR and OS-CFAR receivers and for Rayleigh targets and interference, and it was seen that in general the fusion decision OR rule is not always the best     

Improved strapdown coning algorithms

Three improved algorithms for strapdown attitude computation utilizing accumulated gyro increments from the previous and current update are developed and evaluated analytically under classical coning motion. The error criterion of Miller is derived directly from the rotation vector concept. The accuracy of updating rotation vector estimation can be improved at least two orders of magnitude as compared with those of conventional algorithms. The proposed algorithm is equivalent to increasing the number of gyro samples used in the conventional method and it requires less computer loading     

Modification of the SAR step transform algorithm

When the basic step transform algorithm is used to compress synthetic-aperture radar (SAR) signals in azimuth, the linear FM rate and sampling rate must satisfy certain tight constraints. In practice, these constraints cannot be satisfied and errors are introduced into the compressed SAR image. A modification is described of the basic step transform which incorporates interpolation and resampling into the algorithm. These changes allow the removal of the constraints and make the step transform more useful for the compression of real data. An autofocusing capability is also included, without introducing much additional complexity     

俄罗斯铝锂合金的研制和应用概况

本文介绍了俄国1420,1430,1450等铝锂合金的研制过程和性能,并与西方类似合金进行了对比,同时还列举了铝锂合金在战斗机、运输机、民航机和直升机上作为结构元件和应用情况。     

采用多级优化技术进行复合材料结构可靠性优化设计

在可靠性基础上将结构体系可靠性优化设计方法发展至复合材料结构,并采有多级优化技术提出了复合材料结构可靠性优化设计方法。系统级优化以结构总重最小为目标函数,以满足结构体系可靠性指标要求为约束条件;元件级优化以元件可靠度最大为目标函数,以层板或元件重量在一次迭代中保持不变为约束条件,从而导出了相应的优化准则和迭代式。算例表明该方法的效率高、收敛性好,能推广应用于大型复合材料结构。     

高超音速后掠激波与边界层干扰流场特性

应用表面油流和液晶温度显示、表面热流率和压力测量四种测试技术,在Ma_∞=7.8、单位长度雷诺数尺Re_∞=3.5×10~7/m条件下,研究了30°迎角尖前缘翼面诱导激波和湍流边界层干扰流场特性。结果表明:表面流动是准锥型,在强相互作用下,流动发生了二次分离和再附,导致表面油流线的流向角、温度、热流率和压力分布均出现明显的凹坑。