Locating the LCROSS Impact Craters

The Lunar CRater Observations and Sensing Satellite (LCROSS) mission impacted a spent Centaur rocket stage into a permanently shadowed region near the lunar south pole. The Sheperding Spacecraft (SSC) separated ～9 hours before impact and performed a small braking maneuver in order to observe the Centaur impact plume, looking for evidence of water and other volatiles, before impacting itself. This paper describes the registration of imagery of the LCROSS impact region from the mid- and near-infrared cameras onboard the SSC, as well as from the Goldstone radar. We compare the Centaur impact features, positively identified in the first two, and with a consistent feature in the third, which are interpreted as a 20 m diameter crater surrounded by a 160 m diameter ejecta region. The images are registered to Lunar Reconnaisance Orbiter (LRO) topographical data which allows determination of the impact location. This location is compared with the impact location derived from ground-based tracking and propagation of the spacecraft’s trajectory and with locations derived from two hybrid imagery/trajectory methods. The four methods give a weighted average Centaur impact location of ?84.6796°, ?48.7093°, with a 1σ uncertainty of 115 m along latitude, and 44 m along longitude, just 146 m from the target impact site. Meanwhile, the trajectory-derived SSC impact location is ?84.719°, ?49.61°, with a 1σ uncertainty of 3 m along the Earth vector and 75 m orthogonal to that, 766 m from the target location and 2.803 km south-west of the Centaur impact. We also detail the Centaur impact angle and SSC instrument pointing errors. Six high-level LCROSS mission requirements are shown to be met by wide margins. We hope that these results facilitate further analyses of the LCROSS experiment data and follow-up observations of the impact region.     

Measuring Rotational Motion with Linear Accelerometers

Inertial navigation systems usually use gyroscopes to sense angular motion and use accelerometers to sense linear acceleration. It is feasible, however, using only linear accelerometers as sensors, to determine both the angular velocity and the linear acceleration of a vehicle. This paper presents and compares five configurations of linear accelerometers which may be used to determine both the angular motion and the linear motion of a vehicle.     

The Juno Gravity Science Instrument

The Juno mission’s primary science objectives include the investigation of Jupiter interior structure via the determination of its gravitational field. Juno will provide more accurate determination of Jupiter’s gravity harmonics that will provide new constraints on interior structure models. Juno will also measure the gravitational response from tides raised on Jupiter by Galilean satellites. This is accomplished by utilizing Gravity Science instrumentation to support measurements of the Doppler shift of the Juno radio signal by NASA’s Deep Space Network at two radio frequencies. The Doppler data measure the changes in the spacecraft velocity in the direction to Earth caused by the Jupiter gravity field. Doppler measurements at X-band (\(\sim 8\) GHz) are supported by the spacecraft telecommunications subsystem for command and telemetry and are used for spacecraft navigation as well as Gravity Science. The spacecraft also includes a Ka-band (\(\sim 32\) GHz) translator and amplifier specifically for the Gravity Science investigation contributed by the Italian Space Agency. The use of two radio frequencies allows for improved accuracy by removal of noise due to charged particles along the radio signal path.     

Effect of Processing and Composition on the Structure and Properties of P/M EP741NP Type Alloys

A study was carried out on the effects of processing and composition on the structure and properties of P/M EP741NP type alloys. The objectives of this study were to understand the role of Hf in a P/M superalloy containing high niobium used in aircraft engines and to determine the effects of extrusion and forging the powders as contrasted to HIPing (hot isostatic pressing) only. Two alloys of the P/M EP741NP composition were atomized: one alloy contained 0.26%Hf and the other was Hf free. After the as-atomized powders from both alloys were characterized, the powders were extruded into billets, forged and heat treated. After each process, the microstructures were characterized by SEM and the phases were extracted and identified by X-ray diffraction. The presence of Hf in the residues was probed by EDS (energy dispersive spectroscopy). The alloys were given the published Russian heat treatment as well as a more conventional heat treatment more typical of western powder alloys. Tensile, creep and stress rupture mechanical property tests were run. Results of the structural behavior of the alloys after each processing step will be presented and discussed. The role of the Hf on the mechanical proper- ties will be discussed.     

The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.     

Supplements to Active Filters in the VOR

This paper covers some important advances in understanding the problems associated with the VOR system, especially in connection with area navigation. Anomalies arising from airborne equipment, operating in the airborne environment, are described and analyzed. Factors contributing to overall system accuracy are treated with respect to VOR receiver response and to rate-limiting, filter means, with special attention to appropriate noise reduction systems providing zero or minimal time delay characteristics. The use of active filters in the VOR receiver is shown to be of major importance with regard to signal improvement and overall system accuracy. Active filters of the constant slew rate type have proved of significant value, both within the VOR receiver as well as in signal processing.     

Measurement and stability of the pointing of the BepiColombo Laser Altimeter under thermal load

The BepiColombo Laser Altimeter (BELA) has been selected to fly on ESA?s BepiColombo mission to Mercury. The instrument will be the first European laser altimeter designed for interplanetary flight. This paper describes the setup used to characterize the angular movements of BELA under the simulated environmental conditions that the instrument will encounter when orbiting Mercury. The system comprises a laser transmitter and a receiving telescope, which can move with respect to each other under thermal load. Tests performed using the Engineering Qualification Model show that the setup is accurate enough to characterize angular movements of the instrument components to an accuracy of ≈10 μrad. The qualification instrument is thermally stable to operate during all mission phases around Mercury proving that the transmitter and receiver sections will remain within the alignment requirements during its mission.