煤水浆的雾化与磨损的实验研究

本煤水浆喷嘴采用内混合式空气雾化喷嘴(图1)。煤水浆通道设计成形状简单的直通道。主流雾化空气高速旋转喷出,在内混合室与煤水浆混合,形成气浆薄液膜,它在内混合室出口处再与次流雾化空气相撞,进一步雾化破碎。 实验用煤粉成份为固体碳68.0％.挥发份23.2％,灰分7.8％和硫0.84％.实验用煤水浆按重量比为70％的磨细煤粉、1％的附加剂和29％的水组成。最大煤粒尺寸为250um。混     

THE DIGITAL WAVE-PROCESSING EXPERIMENT ON CLUSTER

The wide variety of geophysical plasmas that will be investigated by the Cluster mission contain waves with a frequency range from DC to over 100 kHz with both magnetic and electric components. The characteristic duration of these waves extends from a few milliseconds to minutes and a dynamic range of over 90 dB is desired. All of these factors make it essential that the on-board control system for the Wave-Experiment Consortium (WEC) instruments be flexible so as to make effective use of the limited spacecraft resources of power and telemetry-information bandwidth. The Digital Wave Processing Experiment, (DWP), will be flown on Cluster satellites as a component of the WEC. DWP will coordinate WEC measurements as well as perform particle correlations in order to permit the direct study of wave/particle interactions. The DWP instrument employs a novel architecture based on the use of transputers with parallel processing and re-allocatable tasks to provide a high-reliability system. Members of the DWP team are also providing sophisticated electrical ground support equipment, for use during development and testing by the WEC. This is described further in Pedersen et al. (this issue).     

Near Magnetic Field Investigation,Instrumentation, Spacecraft Magnetics and Data Access

The primary objective of the investigation is the search for a body-wide magnetic field of the near Earth asteroid Eros. The Near Earth Asteroid Rendezvous (NEAR) 3-axis fluxgate magnetometer includes a sensor mounted on the high-gain antenna feed structure. The NEAR Magnetic Facility Instrument (MFI) is a joint hardware effort between GSFC and APL. The design and magnetics approach achieved by the NEAR MFI effort entailed low-cost, up-front attention to engineering solutions which did not impact the schedule. The goal of the magnetometer is reliable magnetic field measurements within 5 nT, which necessitates the use of an extensive spacecraft magnetic interference model but is achievable with the full year's orbital data set. Such a goal has been shown viable with recent in-flight calibration data and comparisons to the WIND magnetometer data. The NEAR MFI effort has succeeded in providing magnetic field measurements for the first flight in NASA's Discovery line.     

The ACE Magnetic Fields Experiment

The magnetic field experiment on ACE provides continuous measurements of the local magnetic field in the interplanetary medium. These measurements are essential in the interpretation of simultaneous ACE observations of energetic and thermal particles distributions. The experiment consists of a pair of twin, boom- mounted, triaxial fluxgate sensors which are located 165 inches (=4.19 m) from the center of the spacecraft on opposing solar panels. The electronics and digital processing unit (DPU) is mounted on the top deck of the spacecraft. The two triaxial sensors provide a balanced, fully redundant vector instrument and permit some enhanced assessment of the spacecraft's magnetic field. The instrument provides data for Browse and high-level products with between 3 and 6 vector s−1 resolution for continuous coverage of the interplanetary magnetic field. Two high-resolution snapshot buffers each hold 297 s of 24 vector s−1 data while on- board Fast Fourier Transforms extend the continuous data to 12 Hz resolution. Real-time observations with 1-s resolution are provided continuously to the Space Environmental Center (SEC) of the National Oceanographic and Atmospheric Association (NOAA) for near- instantaneous, world-wide dissemination in service to space weather studies. As has been our team's tradition, high instrument reliability is obtained by the use of fully redundant systems and extremely conservative designs. We plan studies of the interplanetary medium in support of the fundamental goals of the ACE mission and cooperative studies with other ACE investigators using the combined ACE dataset as well as other ISTP spacecraft involved in the general program of Sun-Earth Connections. This revised version was published online in June 2006 with corrections to the Cover Date.     

On the Slow Solar Wind

A theory for the origin of the slow solar wind is described. Recent papers have demonstrated that magnetic flux moves across coronal holes as a result of the interplay between the differential rotation of the photosphere and the non-radial expansion of the solar wind in more rigidly rotating coronal holes. This flux will be deposited at low latitudes and should reconnect with closed magnetic loops, thereby releasing material from the loops to form the slow solar wind. It is pointed out that this mechanism provides a natural explanation for the charge states of elements observed in the slow solar wind, and for the presence of the First-Ionization Potential, or FIP, effect in the slow wind and its absence in fast wind. Comments are also provided on the role that the ACE mission should have in understanding the slow solar wind. This revised version was published online in June 2006 with corrections to the Cover Date.     

Power Generation?Some Tasks and Goals

Generating capacity additions planned for the 1970's and beyond include a high percentage of nuclear power plants. The light water reactor is the dominant type of commercial nuclear reactor being installed during the 1970's. Advancement to more efficient designs, such as the high-temperature gas-cooled reactor, is expected around 1980. Prospects for the breeder reactor and fusion energy systems dictate a major research and development effort. Attempts to control effluents from fossil-fired plants have resulted in a sharp increase in the use of low sulfur fuels. Research and development efforts are being intensified in an attempt to obtain a breakthrough in methods of stack emission control.     

高速切削在模具加工中的应用及发展趋势

叙述了高速切削技术的意义,并介绍了它在电极制造、淬硬材料型腔的直接加工及样件的快速成型中的应用及优点,并简要说明对高速铣床的要求.     

The Influence of Tilt Angle and Magnetic Field Variations on Cosmic ray Modulation

The maximum inclination of the heliospheric current sheet (the tilt angle) and the magnitude B of the heliospheric magnetic field are often used to characterize cosmic ray (CR) modulation. The relevance of B is likely to be the coupling of the interplanetary diffusion coefficients K to the field magnitude in a relation K∝B ⁻ⁿ. In this paper we study the coupled influence of tilt angle and magnetic field variations on the modulation of cosmic rays at neutron monitor energies for the 1974 mini-cycle and for the onsets of solar cycles 21, 22, and 23. It is suggested that for A>0 polarity epochs, the sensitivity of the CR response to variations in B is partly controlled by the size of the tilt angle, α. The onsets of cycles 21 and 23 exhibit differences, related to phase differences in these parameters. A simple model is used to predict the CR response to variations in B. This revised version was published online in August 2006 with corrections to the Cover Date.