轰炸机的发展历程和前景

介绍了轰炸机在各历史阶段发挥的重要作用，分析了轰炸机从诞生到第二次世界大战中发展成熟，以及在冷战时期轰炸机发展的3个阶段。描述了在每个时期不同战场环境下对轰炸机的不同要求，以及由此而产生不同的气动布局形式，进而分析了未来轰炸机发展的3个方向和美国当前可能的型号选择。     

Gain self-scheduled H_∞ control for morphing aircraft in the wing transition process based on an LPV model

This article investigates gain self-scheduled H 1 robust control system design for a tailless fold- ing-wing morphing aircraft in the wing shape varying process. During the wing morphing phase, the aircraft’s dynamic response will be governed by time-varying aerodynamic forces and moments. Nonlinear dynamic equations of the morphing aircraft are linearized by using Jacobian linearization approach, and a linear parameter varying (LPV) model of the morphing aircraft in wing folding is obtained. A multi-loop controller for the morphing aircraft is formulated to guarantee stability for the wing shape transition process. The proposed controller uses a set of inner-loop gains to provide stability using classical techniques, whereas a gain self-scheduled H 1 outer-loop controller is devised to guarantee a specific level of robust stability and performance for the time-varying dynamics. The closed-loop simulations show that speed and altitude vary slightly during the whole wing folding process, and they converge rapidly after the process ends. This proves that the gain self-scheduled H 1 robust controller can guarantee a satisfactory dynamic performance for the morphing aircraft during the whole wing shape transition process. Finally, the flight control system’s robustness for the wing folding process is verified according to uncertainties of the aerodynamic parameters in the nonlinear model.     

气动加热下光学窗口传热特性的数值模拟

针对气动加热条件下光学窗口辐射导热耦合传热开展研究,以了解光学窗口的热辐射发射规律及热防护性能。采用有限体积法、蒙特卡罗法、谱带模型建立了具有镜反射界面的光学窗口辐射传输及辐射导热耦合传热计算模型,对具有两层SiO2玻璃的光学窗口传热特性进行了模拟。结果表明处于高温区玻璃向外发射热辐射,低温区玻璃吸收热辐射;除了加热面附近外的玻璃区域,辐射热流密度远大于导热热流密度,在2.9～4.2μm谱带内的辐射热流密度大于0.4～2.9μm谱带内的;在0.4～2.9μm谱带内,可见光波长内的出射辐射热流密度最小,中红外波长范围内出射辐射热流密度最大。在光学窗口总厚度一定的情况下,降低玻璃层厚度和玻璃夹层气体热导率能够有效降低光学窗口非加热面稳态温度。     

一种新型结构非本征光纤F-P传感器全应变测量性能研究

光纤传感器作为一种新的测量信息传输方式,在航空发动机部件材料高温测量领域具有重要的应用价值。基于多光束干涉原理,制作一种新型结构的非本征光纤 Fabry-Perot（F-P）传感器,探索其在航空发动机部件材料室温/高温环境静力拉伸试验过程中的变形测量性能。采用平板和圆棒两种形状的试样,在不同表面粗糙度和两种加载速率下,分别对比高级视频引伸计（AVE）进行室温、高温环境下静力拉伸试验。结果表明：新型结构的非本征光纤 F-P 传感器具有测量范围大,测量精度高,测量结果不受外界因素影响等优势,可实现航空发动机部件材料的超量程全应变测量;此外,在测量精度和设备体积方面明显优于 AVE。     

基于改进多模型的火星大气进入自适应估计方法

针对火星进入过程中大气密度等不确定参数对导航系统状态估计精度的影响,提出了一种基于改进混合专家框架的多模型自适应估计方法。该方法对进入过程中不同的测量信息进行规范化处理,以克服传统多模型自适应估计方法稳定性差、数值下溢等固有缺陷,进一步提高状态估计精度。将其应用于火星不同进入探测方式下的导航场景进行仿真分析。仿真结果表明:该方法在动力学系统模型参数存在不确定扰动时能获得精确的状态估计,可以满足未来定点着陆探测对导航系统的精度需求。     

Interface flux reconstruction method based on optimized weight essentially non-oscillatory scheme

Aimed at the computational aeroacoustics multi-scale problem of complex configurations discretized with multi-size mesh, the flux reconstruction method based on modified Weight Essentially Non-Oscillatory (WENO) scheme is proposed at the interfaces of multi-block grids. With the idea of Dispersion-Relation-Preserving (DRP) scheme, different weight coefficients are obtained by optimization, so that it is in WENO schemes with various characteristics of dispersion and dissipation. On the basis, hybrid flux vector splitting method is utilized to intelligently judge the amplitude of the gap between grid interfaces. After the simulation and analysis of 1D convection equation with different initial conditions, modified WENO scheme is proved to be able to independently distinguish the gap amplitude and generate corresponding dissipation according to the grid resolution. Using the idea of flux reconstruction at grid interfaces, modified WENO scheme with increasing dissipation is applied at grid points, while DRP scheme with low dispersion and dissipation is applied at the inner part of grids. Moreover, Gauss impulse spread and periodic point sound source flow among three cylinders with multi-scale grids are carried out. The results show that the flux reconstruction method at grid interfaces is capable of dealing with Computational AeroAcoustics (CAA) multi-scale problems.     

求根传播算子方法及其在ARM抗诱偏中的应用

反辐射导弹（ARM）抗有源诱偏问题中,多源信号在空、频域的强相关性往往造成导引头对信源数目欠估计,从而导致传统超分辨算法的测向性能下降。针对这一问题,提出了一种求根的传播算子方法,该算法首先在信源数过估计情况下计算信号到达角,然后利用每个角度对应的信号功率来剔除虚假角度。求根传播算子方法不需要预先估计信号源数目,而且在信号高度相关的情况下具备很好的角度分辨性能,因此适用于解决ARM抗诱偏问题。仿真实验结果表明,求根传播算子方法在提高ARM抗诱偏能力方面的表现优于MUSIC算法。     

Z型翼变体飞机的纵向多体动力学特性

机翼变形时,变体飞机的翼面积、惯性特性、全机焦点和重心位置等均会发生较大的变化,从而引起飞机的动态特性也随之改变。为此对机翼变形过程中的Z型翼变体飞机进行了纵向多体动力学建模仿真;推导了变形过程中变体飞机的六自由度非线性动力学方程,并通过简化得到了解耦后的纵向动力学方程。机翼折叠动态过程的气动特性数值模拟结果表明,不同折叠角速度下飞机的气动力相差不大。在机翼折叠角速度较小且忽略非定常气动效应的情况下,采用气动力准定常假设对变形过程中不同机翼折叠角速度下变体飞机的纵向响应进行了数值仿真,并研究了重心位置移动和气动特性变化对飞机变形过程动态特性的影响规律。结果表明,折叠过程中气动特性的变化是影响飞机动态特性的主要因素,机翼折叠后飞机的速度和迎角增加,且飞行高度下降较大。     

雷达射频前端的仿真设计

采用自顶向下的设计方法,设计了工作于S波段的带宽为100MHz的雷达接收前端.使用Agilent公司的ADS微波设计软件对系统性能进行了仿真论证.分别设计了低噪声放大器、混频器、中频放大器模块,仿真结果均达到要求.前端仿真结果:增益大于75dB,噪声系数小于3dB,镜像抑制度为60dB,灵敏度为-90dBm,动态范围为50dB.     

Sensor calibration impacts on dust detection based on MODIS and VIIRS thermal emissive bands

Dust detection using remotely sensed measurements has been one of the challenging problems encountered by atmospheric scientists. MODerate Resolution Imaging Spectroradiometer (MODIS) on the Terra (T) and Aqua (A) platforms have been a versatile sensor for well over 21 and 18 years respectively, and have been extremely useful in the retrieval of aerosol information over the entire globe. The MODIS radiances from the Level 1B in general are expected to be within 5% accuracy in the reflective wavelengths and within 1% in the thermal emissive wavelengths. In this paper, we evaluate the sensitivity of previously developed dust detection technique based on thermal emissive wavelengths, which correspond to MODIS bands 20, 29, 31, and 32 respectively. The Thermal Emissive Dust Index (TEDI) performed very comparably to the traditional Aerosol Optical Thickness (AOT) retrievals by MODIS reflective channels. Since the MODIS Thermal Emissive Bands (TEB) are well calibrated on-orbit using a BlackBody (BB) source, the calibration of these long wave infrared bands is quite robust. As A-MODIS continues to perform well beyond its designed lifetime of 6 years, the instrument has undergone various levels of degradation during its mission time. As a consequence, it is imperative to check the impacts of calibration on the higher-level retrievals. In this paper, we rigorously analyze the sensitivity of TEDI due to the impact of calibration by the afore-mentioned TEB. The perturbation of the dominant (linear) calibration term demonstrated the following: first, there was a correlation in the sensitivity of the TEDI due to the uncertainty in the linear calibration term. Based on a perturbation in the linear calibration term for all aforementioned bands over a range of ±5% yielded the TEDI sensitivity to vary from approximately ?3.2% to about ?3.6%. When considering the uncertainty in each individual band significant changes were observed. The least change was observed for the perturbation in the calibration of band 20 with the TEDI sensitivity and the largest sensitivity in TEDI was observed in the perturbation of band 31 calibration. Thus, in the case of TEDI, noticeable sensitivity due to calibration uncertainty was observed in bands 29, 31, and 32, reiterating the importance of the TEB calibration in these bands. Also, the dust detection scheme based on A-MODIS was successfully transferred to the follow-on sensors such as Suomi (SNPP) and NOAA 20 (N20) VIIRS. The results presented in this paper would be extremely helpful in understanding impacts of calibration on the higher-level products for both current and future missions based on the MODIS heritage. Finally, the work also identifies the importance of radiometric fidelity in maintaining the accuracy of the dust detection. Results presented will show drastic improvement of the Saharan dust detection after the reduction of the electronic crosstalk in the 8.5 µm channel of T-MODIS.