Simulation-based evaluation of a cold atom interferometry gradiometer concept for gravity field recovery

The prospects of future satellite gravimetry missions to sustain a continuous and improved observation of the gravitational field have stimulated studies of new concepts of space inertial sensors with potentially improved precision and stability. This is in particular the case for cold-atom interferometry (CAI) gradiometry which is the object of this paper. The performance of a specific CAI gradiometer design is studied here in terms of quality of the recovered gravity field through a closed-loop numerical simulation of the measurement and processing workflow. First we show that mapping the time-variable field on a monthly basis would require a noise level below $5\text{mE}/\sqrt{\text{Hz}}$. The mission scenarios are therefore focused on the static field, like GOCE. Second, the stringent requirement on the angular velocity of a one-arm gradiometer, which must not exceed ${10}^{-6}$?rad/s, leads to two possible modes of operation of the CAI gradiometer: the nadir and the quasi-inertial mode. In the nadir mode, which corresponds to the usual Earth-pointing satellite attitude, only the gradient $V_{\mathit{yy}}$, along the cross-track direction, is measured. In the quasi-inertial mode, the satellite attitude is approximately constant in the inertial reference frame and the 3 diagonal gradients $V_{\mathit{xx}}\text{,}{V}_{\mathit{yy}}$ and $V_{\mathit{zz}}$ are measured. Both modes are successively simulated for a 239?km altitude orbit and the error on the recovered gravity models eventually compared to GOCE solutions. We conclude that for the specific CAI gradiometer design assumed in this paper, only the quasi-inertial mode scenario would be able to significantly outperform GOCE results at the cost of technically challenging requirements on the orbit and attitude control.     

Variation of hmF2 and NmF2 deduced from DPS-4 over Multan (Pakistan) and their comparisons with IRI-2012 & IRI-2016 during the deep solar minimum between cycles 23 & 24

We report the results of ionospheric measurements from DPS-4 installed at Multan (Geog coord. 30.18°N, 71.48°E, dip 47.4°). The variations in F2-layer maximum electron density NmF2 and its peak height hmF2 are studied during the deep solar minimum between cycles 23 & 24 i.e 2008–2009 with comparisons conducted with the International Reference Ionosphere (IRI) versions 2012 & 2016. We find that the hmF2 observations peak around the pre-sunrise and sunrise hours depending on the month. Seasonally, the daytime variation of NmF2 is higher in the Equinox and Summer, while daytime hmF2 are slightly higher in the Equinox and Winter. High values of hmF2 around midnight are caused by an increase of upward drifts produced by meridional winds. The ionosphere over Multan, which lies at the verge of low and mid latitude, is affected by both $E\times B$ drifts and thermospheric winds as evident from mid-night peaks and near-sunrise dips in hmF2. The results of the comparison of the observed NmF2 and hmF2 for the year 2008–2009 with the IRI-2012 (both NmF2 and hmF2) and IRI-2016 (only hmF2) estimates indicate that for NmF2, IRI-2012 with Consultative Committee International Radio (CCIR) option produces values in better agreement with observed data. Whereas, for hmF2, IRI-2016 with both International Union of Radio Science (URSI) and CCIR SHU-2015 options, predicts well for nighttime hours throughout the year. However, the IRI-2012 with CCIR option produces better agreement with data during daytime hours. Furthermore, IRI-2012 with CCIR option gives better results during Equinox months, whereas, IRI-2016 with both URSI and CCIR SHU-2015 options predict well for Winter and Summer.     

Landsat model for groundwater exploration in Nuba Mountains,Sudan

The region of Nuba Mountains is largely dominated by Precambrian crystalline basement rocks, and often experiences acute shortage of water for domestic and irrigation purposes especially during the dry season (February – May). A Landsat model essentially based on lineament and drainage analysis is proposed to delineate potential target zones for groundwater prospecting. Target zones are indicated by the overlap of the high-intensity lineament contours and the low-intensity drainage contours, and by intersection of a stream channel and lineament structure. Most wells lying within the defined targets are successful.     

Control of Synchronous Orbit Using Lyapunov Stability Theory

A state-dependent control law is proposed using the Lyapunov stability theorem and its usefulness for closed-loop control of a synchronous orbit is investigated. It is shown that a sequential scheme using a modified control law provides a more practical means of orbit control.     

European R&D in the satellite communication user Earth segment

This paper refers to a study (specificaly to its chapter 7)¹ carried out by Euroconsult for ESA on the key characteristics of European R&D in the satellite communications user Earth segment. The study was initiated by the Working Group on Satellite Communications Policy² of the Joint Board on Communications Satellite Programmes (JCB), which was established by the Director General of ESA in July 1990 to contribute to the European agency's response to the EC Green Paper. The working group specifically expresses the European space communications industry's point of view.     

InSight Mars Lander Robotics Instrument Deployment System

The InSight Mars Lander is equipped with an Instrument Deployment System (IDS) and science payload with accompanying auxiliary peripherals mounted on the Lander. The InSight science payload includes a seismometer (SEIS) and Wind and Thermal Shield (WTS), heat flow probe (Heat Flow and Physical Properties Package, HP³) and a precision tracking system (RISE) to measure the size and state of the core, mantle and crust of Mars. The InSight flight system is a close copy of the Mars Phoenix Lander and comprises a Lander, cruise stage, heatshield and backshell. The IDS comprises an Instrument Deployment Arm (IDA), scoop, five finger “claw” grapple, motor controller, arm-mounted Instrument Deployment Camera (IDC), lander-mounted Instrument Context Camera (ICC), and control software. IDS is responsible for the first precision robotic instrument placement and release of SEIS and HP³ on a planetary surface that will enable scientists to perform the first comprehensive surface-based geophysical investigation of Mars’ interior structure. This paper describes the design and operations of the Instrument Deployment Systems (IDS), a critical subsystem of the InSight Mars Lander necessary to achieve the primary scientific goals of the mission including robotic arm geology and physical properties (soil mechanics) investigations at the Landing site. In addition, we present test results of flight IDS Verification and Validation activities including thermal characterization and InSight 2017 Assembly, Test, and Launch Operations (ATLO), Deployment Scenario Test at Lockheed Martin, Denver, where all the flight payloads were successfully deployed with a balloon gravity offload fixture to compensate for Mars to Earth gravity.     

Security, Internet connectivity and aircraft data networks

Internet connectivity which was in experimental stages only a few years ago is a reality today. Current implementations allow passengers to access Internet for pleasure and in some cases secure VPN access is provided to corporate networks. Several researchers are looking at the possibility of the existence of a total of three networks: passenger network (PN); crew network (CRN); and the control network (CON). Researchers envision an architecture where these three networks will co-exist in an airplane. The available Internet connectivity can be utilized for transporting flight critical information like cockpit flight data recorder (CFDR) data, digital flight data recorder (DFDR) data, cockpit voice recorder (CVR) data, and controller pilot data link communication. In addition, the Internet connectivity could also be used for other safety mechanisms like video surveillance and remote control of the flight. Security is one of the major concerns that affect the successful deployment of aircraft data networks (ADN) and other safety features. Several studies have been carried out to secure the network using firewalls and intrusion detection system but so far no study has focused on securing the communication channel (between the aircraft and the ground station) and its impact on the ADN. The scope of this research is to determine the viability and need of a security mechanism. The research also focuses on the performance of different security architectures and determine their usability in the framework of an ADN.     

A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates

A refined trigonometric shear deformation theory (RTSDT) taking into account transverse shear deformation effects is presented for the thermoelastic bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, does not require shear correction factor, the displacement components are expressed by trigonometric series representation through the plate thickness to develop a two-dimensional theory and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The sandwich with homogeneous facesheet and FGM core is considered. Material properties of the present FGM core are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The influences played by the transverse shear deformation, thermal load, plate aspect ratio, and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed theory is accurate and simple in solving the thermoelastic bending behavior of functionally graded plates.     

Effects of punch size,magnetic field,and magnetorheological elastomers medium on forming T-shaped thin-walled Inconel 718 tubes

This study aims at investigating the impact of using the Magnetorheological Elastomers(MREs) medium to improve the formability of T-shaped Inconel 718 tubes during the bulging process. Besides, the influence of the punch size and the intensity of the magnetic field on the branch height and wall thickness distribution of the T-shaped Inconel 718 tubes are also explored. The results showed that the parts formed by the punch with a length of 5 mm in the pressurization zone have better forming quali...     

New frontiers in design synthesis

The Intelligent Synthesis Environment (ISE), which is one of the major strategic technologies under development at NASA centers and the University of Virginia, is described. One of the major objectives of ISE is to significantly enhance the rapid creation of innovative affordable products and missions. ISE uses a synergistic combination of leading-edge technologies, including high performance computing, high capacity communications and networking, human-centered computing, knowledge-based engineering, computational intelligence, virtual product development, and product information management. The environment will link scientists, design teams, manufacturers, suppliers, and consultants who participate in the mission synthesis as well as in the creation and operation of the aerospace system. It will radically advance the process by which complex science missions are synthesized, and high-tech engineering systems are designed, manufactured and operated. The five major components critical to ISE are human-centered computing, infrastructure for distributed collaboration, rapid synthesis and simulation tools, life cycle integration and validation, and cultural change in both the engineering and science creative process. The five components and their subelements are described. Related U.S. government programs are outlined and the future impact of ISE on engineering research and education is discussed.