Radar Cross Section of Ships

A laboratory method to determine the magnitude and position of radar reflection sources on complex targets is described. In addition the method provides a way to measure the modification of the radar cross section (RCS) due to multipath. The method has application in modeling RCS for radar and electronic countermeasure (ECM) system performance analysis and in the study of the extent to which the signature of the target could be altered. The equipment described, termed MACROSCOPE, was developed for RCS studies by the U.S. Army and is described in limited distribution bution literature. The application to marine targets is new with this paper, as is the technique of measuring the RCS of parts of the target and analytically combining them to represent the whole. An illustration of the need for this type of laboratory equipment was illustrated by the extensive search for full scale data which could be compared to scale model data to validate the technique.     

钛合金胶接点焊接头的性能检测

研究了不同焊接电流下钛合金板胶接点焊接头的A扫描信号和C扫描图像特征,并进行了拉伸-剪切试验。结果表明:通过观察C扫描图像的特征与A扫描信号的变化,能够划分胶接点焊接头的胶层区、热影响区、熔合区、熔核区以及焊接缺陷;随着电流(7~10 k A)的逐渐增大,接头熔核直径呈递增趋势,相应的失效载荷从7 231.5增加到10 939.0 N;当电流为7 k A时,在C扫描图像上反映出飞溅缺陷,此时接头失效载荷远小于没有出现飞溅的接头,可见飞溅降低了胶接点焊接头的拉剪载荷。     

Study of the variability of blazars gamma-ray emission

The γ-ray emission of blazar jets shows a pronounced variability and this feature provides limits to the size and to the speed of the emitting region. We study the γ-ray variability of bright blazars using data from the first 18 months of activity of the Large Area Telescope on the Fermi Gamma-Ray Space Telescope. From the daily light-curves of the blazars characterized by a remarkable activity, we firstly determine the minimum variability time-scale, giving an upper limit for the size of the emitting region of the sources, assumed to be spheroidal blobs in relativistic motion. These regions must be smaller than ∼10⁻³ parsec. Another interesting time-scale is the duration of the outbursts. We conclude that they cannot correspond to radiation produced by a single blob moving relativistically along the jet, but they are either the signature of emission from a standing shock extracting energy from a modulated jet, or the superposition of a number of flares occurring on a shorter time-scale. We also derive lower limits on the bulk Lorentz factor needed to make the emitting region transparent for gamma-rays interacting through photon–photon collisions.     

新媒体视域下系统构建“三位一体”公寓管理模式

随着科技日益进步和5G时代的即将到来,在治理体系上越来越注重管理与哲学教育相结合,高校作为接收新事物、新思维的前沿阵地。学生公寓成为大学生思想政治教育的又一个重要的阵地,因此创新公寓管理体系并努力做到使之与哲学相结合也成为了一项重大任务,高校辅导员、公寓辅导员、高校后勤管理人员结合新媒体创新学生公寓的管理方式对新时代大学生的教育、管理、服务掌控和开展思想政治教育工作至关重要。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

Optimization of electrode system for the aircraft time-of-flight ion-marking airspeed and angle of attack sensor

A technique of optimizing the electrode system of the differential recorder for the aircraft time-of-flight ion-marking airspeed and aircraft angle of attack sensor by the criterion of ion-marking recording error variance minimum is considered. The technique is based on analyzing the function of spatial distribution for the ion-marking and recorder electrode interaction field potential and determining a point for which this function reaches the maximum slope. The relations making it possible to synthesize the sensor electrode system by the complex criterion as a ratio of error variance to transformation channel response are obtained.     

Displacement simulation for spacecraft structure

The paper presents a technique of forming and evaluating the allowable clearance between a launch vehicle fairing and spacecraft.     

Enrichment of the Hot Intracluster Medium: Numerical Simulations

The distribution of chemical elements in the hot intracluster medium (ICM) retains valuable information about the enrichment and star formation histories of galaxy clusters, and on the feedback and dynamical processes driving the evolution of the cosmic baryons. In the present study we review the progresses made so far in the modelling of the ICM chemical enrichment in a cosmological context, focusing in particular on cosmological hydrodynamical simulations. We will review the key aspects of embedding chemical evolution models into hydrodynamical simulations, with special attention to the crucial assumptions on the initial stellar mass function, stellar lifetimes and metal yields, and to the numerical limitations of the modelling. At a second stage, we will overview the main simulation results obtained in the last decades and compare them to X-ray observations of the ICM enrichment patterns. In particular, we will discuss how state-of-the-art simulations are able to reproduce the observed radial distribution of metals in the ICM, from the core to the outskirts, the chemical diversity depending on cluster thermo-dynamical properties, the evolution of ICM metallicity and its dependency on the system mass from group to cluster scales. Finally, we will discuss the limitations still present in modern cosmological, chemical, hydrodynamical simulations and the perspectives for improving the theoretical modelling of the ICM enrichment in galaxy clusters in the future.