Atmospheric reentry hemisphere prediction for prograde orbits using logical disjunction

A unique logic-based algorithm for atmospheric reentry hemisphere prediction is presented for spacecraft in low-eccentricity, prograde low Earth orbits at altitudes of 300 km and lower. Using two-line element (TLE) data for initial orbit conditions, coupled with coarse estimates for spacecraft aerodynamic characteristics, the algorithm relies on logical disjunction operations based on a dual analysis of histogram and two-weighted Gaussian probability density function (PDF) fits of predicted reentry latitude data. The algorithm requires the execution of a series of parametric simulations to determine the reentry hemisphere for variations in spacecraft aerodynamic coefficients and drag reference area. When implemented, the algorithm yields accurate hemisphere predictions on average 15 days from reentry as demonstrated by historical reentry cases from 1979 to 2018. All reentry cases were selected to demonstrate the algorithm’s ability to deliver accurate reentry hemisphere predictions for spacecraft with varying physical size and mass, and reentering during different periods of solar cycle activity.     

敏捷制造模式下的质量保证信息系统

客户驱动的动态的全球市场及地理上分布的合作伙伴给开发敏捷制造模式下的质量保证信息系统(QAIS)带来了新的挑战,本文先对敏捷制造模式下的QAIS进行了需求分析,提出了新的分布式QAIS的实现框架,利用当前迅速发展的信息技术,建立了QAIS的开发环境并对有关关键技术进行了初步研究,最后开发完成了一个基于Web的QAIS原型系统.     

Coronal radio-sounding detection of a CME during the 1997 Galileo solar conjunction

Frequency fluctuations of the Galileo S-band radio signal were recorded nearly continuously during the spacecraft’s solar conjunction from December 1996 to February 1997. A strong propagating disturbance, most probably associated with a coronal mass ejection (CME), was detected on 7 February when the radio ray path proximate point was on the west solar limb at about 54 solar radii from the Sun. The CME passage through the line of sight is characterized by a significant increase in the fluctuation intensity of the recorded frequency and by an increase in the plasma speed from about 234 km s⁻¹ up to about 755 km s⁻¹. These velocity estimates are obtained from a correlation analysis of frequency fluctuations recorded simultaneously at two widely-separated ground stations. The density turbulence power spectrum is found to steepen behind the CME front. The Galileo radio-sounding data are compared with SOHO/LASCO observations of the CME in the corona and with WIND spacecraft data near the Earth’s orbit.     

Modeling of ionospheric parameter variations in East Asia during the moderate geomagnetic disturbances

The results of modeling of ionospheric disturbances observed in the East Asian region during moderate storms are presented. The numerical model for ionosphere–plasmasphere coupling developed at the ISTP SB RAS is used to interpret the data of observations at ionospheric stations located in the longitudinal sector of 90–130°E at latitudes from auroral zone to equator. There is obtained a reasonable agreement between measurements and modeling results for winter and equinox. In the summer ionosphere, at the background of high ionization by the solar EUV radiation in the quiet geomagnetic period the meridional thermospheric wind strongly impacts the electron concentration in the middle and auroral ionosphere. The consistent calculations of the thermospheric wind permit to obtain the model results which are closer to summer observations. The actual information about the space-time variations of thermosphere and magnetosphere parameters should be taken into account during storms.     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

Changes in plant medium composition after a spaceflight experiment: Potassium levels are of special interest

We present results on the analysis of 100 mL medium samples extracted from sterilized foam (Smithers-Oasis, Kent OH) used to support the growth of a representative dicotyledon (Haplopappus gracilis) and a representative monocotyledon (Hemerocallis cv Autumn Blaze) in NASA’s Plant Growth Unit (PGU) during a 5-day Space Shuttle flight and ground experiments. At recovery, the media remaining within replicate (n = 5) foam blocks (for both the spaceflight and ground experiments) were extracted under vacuum, filtered and subjected to elemental analyses. A unique aspect of this experiment was that all plants were either aseptically-generated tissue culture propagated plantlets or aseptic seedling clones. The design of the PGU facilitated the maintenance of asepsis throughout the mission (confirmed by post-flight microbial sampling) and thus any possible impact of microorganisms on medium composition was eliminated. Concentration levels of some elements remained the same, while some decreased and others increased. There was a significant two-fold difference between the final concentrations of potassium when the Earth-based and microgravity experiments were contrasted.     

Solar wind turbulence during the solar cycle deduced from Galileo coronal radio-sounding experiments

Seven coronal radio-sounding campaigns were carried out during the active lifetime of the Galileo spacecraft in the years 1994–2002. The observational data analyzed in the present work are S-band frequency fluctuation measurements recorded during the solar conjunctions at different phases of solar activity cycle #23, specifically: periods near solar maximum (three conjunctions), near solar minimum (three conjunctions) and during the ascending phase (one conjunction). These data are all applicable to low heliographic latitudes, i.e. to the slow solar wind. The rms frequency fluctuation and power-law index of the frequency fluctuation temporal spectra are determined as a function of heliocentric distance. The turbulence power spectrum tends to be flatter inside ca. 20 solar radii during all phases of the solar cycle. This coincides with a transition in the flow from the inner acceleration region to the outer region of constant velocity. The radial falloff rate and absolute level of the rms frequency fluctuation are essentially invariant over the solar cycle.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

Investigation of resonant modes and frequencies of plate vibrations as applied to turbomachine blades

The results of experimental and numerical investigations of resonant vibration frequencies and modes for rectangular cantilever plates of constant thickness are presented. The investigations are carried out using the methods of interference holography and finite elements, and the results may serve as basic references in determining resonant frequencies and modes of compressor and turbine blade vibrations.