Radial and meridional trends in solar wind thermal electron temperature and anisotropy: Ulysses

Ulysses plasma measurement from 1.15 to 5.31 AU and from S6.4° to S48.3° solar latitude are used to assess the trends in the solar wind thermal electron temperature and anisotropy. Improved spacecraft potential corrections and data products have been incorporated. The radial temperature gradient is steeper than in previous determinations, but flatter than adiabatic. When normalized to 1 AU, temperature decrease with increasing latitude. Little change in the average thermal anisotropy has been seen during the mission.     

Design and characteristics of a multiband communication satelliteantenna system

Feasibility studies on a multiband communication satellite antenna system and the key technologies involved in devising this system are described. The proposed multiband communication satellite utilizes four frequency bands: Ka (30/20 GHz), Ku (14/12 GHz), C (6/4 GHz), and S (2.6/2.5 GHz). It has six beam configurations, three multibeam and three shaped-beam. The following key technologies are presented: (1) a low-loss frequency selective subreflector (FSR) for compact feeds, (2) a low-loss and broadband frequency selective surface (FSS), and (3) a highly accurate and reliable mesh reflector     

IMF control of the Earth's magnetosphere

We review recent progress in the understanding of the IMF control on the Earth's magnetosphere through the reconnection process. Major points include, (1) the identification of the magnetopause structure under the southward IMF polarity to be the rotational discontinuity and the resulting inference that the reconnection line is formed in the equatorial region, and (2) the confirmation from several observational aspects that under the northward IMF the reconnection takes place in the polar cusp. The point (1) is consistent with the observed correlations of geomagnetic indices with IMF but raises an important theoretical issue, and the point (2) is accompanied by an interesting issue of explaining why the polar cap electron precipitation is more energetic under such IMF conditions. Critical studies have reaffirmed the view that the energy supplied by reconnection is partly transported directly to the ionosphere to drive the DP-2 type current system but at the same time it is partly stored in the magnetic field of the tail to be unloaded 0.5 1 hr later to produce the expansion phase of substorm.Presented at the Fifth International Symposium on Solar-Terrestrial Physics, held at Ottawa, Canada, May 1982.     

Signal-to-Noise Ratio of Arbitrary Power-Series Nonlinear Amplifier

A general analysis of the effect of an arbitrary power-series nonlinear amplifier followed by a coherent mixing device on signal-to-noise ratio (SNR) is performed. An expression is derived for the improvement factor which is defined as the logarithm of the ratio of the output SNR to the input SNR. This expression is applicable to the coherent amplitude detector and phase locked loop as well as noncoherent amplifier by appropriate selections of the detection angle. Moreover, the improvement factor can be obtained for noise with an arbitrary amplitude distribution. To demonstrate the applicability of this analysis, the improvement factors of the nonlinear amplifiers such as a power-law amplifier and a power-series amplifier with positive and negative discriminations are numerically calculated for the cases where the input noise amplitude distributions are Rician and triangular.     

Performance of Digital Implementations of an Adaptive Processor

The performance of a digital implementation of an Applebaum-Howells type adaptive processor is analyzed for both a limiter and nonlimiter configuration. The performance is evaluated in terms of steady-state residue power, using either a single-pole filter or a perfect integrator to smooth the output of the correlation mixer. The latter filter is the more commonly used for digital implementations. It is shown that when using the perfect integrator filter for both the limiter and linear digital implementations, the steady-state average weight vector equals the optimum weight vector. Thus, for this filter, the steady-state residue power is the minimum possible for either implementation. When using the single-pole filter, neither implementation achieves the minimum possible steady-state residue power. The relative performance of the two implementations depends upon the relative gain settings. When the gains are adjusted to give comparable servo stability for the design maximum jammer power, a reasonable criterion for digital implementations because of analog to digital saturation, the limiter configuration always has smaller steady-state residue power.     

Clutter Covariance Matrix Form Effect on Adaptive MTI Performance

The performance of an adaptive moving target indicator (MTI), which employs a Wiener predictor by means of a transversal filter, is discussed, taking into consideration the effect of the form of the clutter covariance matrix on the MTI performance. It is emphasized that the main tap position in the transversal filter is an important factor which provides degrees of freedom in the clutter covariance matrix to improve the MTI performance. Calculation results show that by exploiting these degrees of freedom, excellent performance is feasible, in particular shorter transient response.     

A Fast Beamforming Algorithm for Large Arrays

This beamforming algorithm is written specifically for array radars in which the number of array elements K is very large compared with the number of jammers L the radar is designed to suppress. It uses a set of M noise vectors to construct a basis for the jammer component of the antenna output vectors. The component of the quiescent weight vector orthogonal to each basis vector is calculated, renormalized to unit length, and identified as the adapted weight vector. This algorithm is effective in the suppression of many types of jammers. The number of noise samples M required in the construction of the adapted weight vector is approximately equal to L. In the special case of L narrowband noise jammers, for example, a choice of M = L usually reduces the receiver output jammer power to a few dBs above the white noise background. It is permissible to have M相似文献   

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

Third-Order Loop Filter Design for Acceleration-Rate Tracking

A perfect third-order loop filter design that can be implemented as a digital filter is obtained which minimizes the noiseless steady-state acceleration rate (jerk) error for a fixed loop noise bandwidth. Simulations were performed to obtain transient responses of the third-order loop plus a sample fourth-order loop under a jerk input. The results enable one to obtain a loop design that minimizes the loop noise bandwidth required for a given steady-state jerk error and thus obtain better noise jitter performance.