Stable mid-latitude red arcs: Observations and theory

Summary The observational features of the arc are fairly well established. At present, the thermal conduction model appears to explain the red arc features most consistently, but it must be noted that a soft electron flux would give very similar results. Ion temperature measurements in the vicinity of an arc, which should be forthcoming in the very near future, can establish conclusively whether transverse electric fields play any important role in the formation of the arcs. Accepting the assumption that the arcs are the result of energy flowing down from the plasmasphere, the major remaining question is: where does the energy come from and how does it get into the plasmasphere? The various proposed mechanisms discussed in the previous chapter appear feasible, but much work needs to be done before this problem is completely resolved.On leave from the Department of Electrical Engineering, The University of Michigan, Ann Arbor.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

High-Speed Homopolar Inductor Alternators of Minimum Leakage Reactance

The leakage reactance of the machine is expressed as an equation involving slot leakage, end-connection leakage, differential leakage, stator-halves leakage, and tooth-top leakage reactance. This leakage reactance equation, or objective function, is then minimized under suitable constraints. Geometric programming is used to carry through the optimization procedure. A computer program is developed and applied to find the optimum leakage reactance for a 95 kVA, 208 V, wye-connected, 40 800 r/min aerospace alternator, using 8-, 10-, and 12-pole machines.     

One-kVA, Three-Phase dc-ac Inverter with Digital Control

This paper describes a method of applying digital techniques to the control of a 1-kVA three-phase dc-ac inverter to generate a sinusoidal 400-Hz output, using high-frequency bridge-chopper techniques. The model which was constructed used predominantly off-theshelf digital microcircuits and resulted in a device with an overall efficiency of 85 percent, in a 0.52 cubic-foot package which weighed 19.5 lbs. Sinusoidal output with less than 2 percent harmonic distortion at 115 volts line to neutral was obtained with 28 volts dc input.     

Aerodynamic Design Method of Integrated Aircraft with Submerged Intake Devices and Power Plant Included into Airframe Carrying System

This paper presents a theoretically and practically grounded architecture of design methods combination. A possibility and completeness of developing integral design solutions and intensifying the design process are provided by redistribution of emphases of numerical and natural experiments.     

Influence of fuel hydrogen additives on the characteristics of a gas-piston engine under changes of an ignition advance angle

We present the results of experimental studies of the fuel hydrogen additive influence on the characteristics of a gas-piston engine converted for operation by natural gas under changes of an ignition advance angle (IAA). The results of investigations were used to determine the influence of the hydrogen additive on the effective engine efficiency and fuel consumption under IAA changes.     

Recursive temporal-spatial information fusion with applications totarget identification

Centralized/distributed recursive algorithms for temporal-spatial information integration using the Dempster-Shafer technique are developed. Compared with the Bayesian approach, the Dempster-Shafer technique has the strong capability of handling information uncertainties, which are particularly desirable in many applications. In the centralized integration algorithm, all information is pooled into the central processor and integrated. In contrast, the distributed integration algorithm shares the computational burden among the local processors, which increases the computational efficiency. The developed algorithms are effectively applied to a target identification problem with three sensors: identification of friend-foe-neutral (IFFN), electronic support measurement (ESM), and infrared search and track (IRST)     

敏捷制造模式下的质量保证信息系统

客户驱动的动态的全球市场及地理上分布的合作伙伴给开发敏捷制造模式下的质量保证信息系统(QAIS)带来了新的挑战,本文先对敏捷制造模式下的QAIS进行了需求分析,提出了新的分布式QAIS的实现框架,利用当前迅速发展的信息技术,建立了QAIS的开发环境并对有关关键技术进行了初步研究,最后开发完成了一个基于Web的QAIS原型系统.     

曲面和任意取向表面表面摩阻油膜测量法的进展

本文叙述曲面和任意取向表面表面摩阻测量方法的进一步的发展。介绍用漫射照明获取薄油膜等厚度干涉条纹谱的理论根据和实验结果。讨论了通过油流显示图像的分析,自动探测表面流线方位的可能性。所得结论表明油膜法也能应用于复杂的三维流动。     

Chaotic zero dynamics in kinematically redundant robots

The authors attempt to integrate two areas in robotics that are maturing rapidly: the control of kinematically redundant rigid robots and feedback linearization. Kinematically redundant robots have several advantages over nonredundant robot arms. The extra degrees of freedom are used to reach around or between obstacles. Unlike nonredundant rigid link robots that do not exhibit zero dynamics, the self motions of kinematically redundant robots can be used for torque optimization or avoiding obstacles. It is shown that induced self motions can be chaotic. The main contribution is to demonstrate chaos in cases of feedback linearization when the decoupling matrix is nonsquare and there are less outputs than inputs     

The astrophysical interest of EUV observations of extra-solar objects

The feasibility of observation of EUV sources is assessed. Many stars have been detected in the EUV range ( 100–1000); line fluxes from others can be predicted. Selected astrophysical problems are reviewed that can benefit from EUV spectroscopy. Included among them are the physics and dynamics of stellar coronae, confirmation of nuclear surface burning on cataclysmic variables, evolutionary properties of white dwarfs, the helium abundance in the interstellar medium, and spectroscopic signatures of neutrino oscillations.Proceedings of the Conference Solar Physics from Space, held at the Swiss Federal Institute of Technology Zurich (ETHZ), 11–14 November 1980.