平板边界层转捩的数值模拟

对于自由湍流引起的压力梯度为零的平板边界层转捩过程的数值模拟,本文提出了一个单方程湍流模型 (VL M模型),对湍流粘性系数和湍流长度尺度都进行了修正以正确引入低雷诺数效应。数值计算表明,该模型在自由来流湍流度为 0.03～8%的大范围内能正确模拟边界层转捩全过程,包括转捩区起点位置和转捩区长度、边界层内的平均及脉动参数分布等。本文还提出了上述转捩过程的时均化五阶段模型。      

大多普勒容限巴克码脉压

 本文介绍用补偿式非相干型旁瓣抑制滤波器(SSF)实现13位巴克码脉冲压缩旁瓣抑制的理论计算及实验结果。补偿式非相干型SSF采用最小二乘近似逆滤波方法设计,若子脉冲宽度为0.7μs,峰值旁瓣电平不超过-30dB,这种SSF的多普勒容限能达到-40kHz～+40kHz。理论计算及实验结果都表明,所设计的补偿式非相干型SSF的多普勒容限比具有同样长度冲激响应序列的R-G-ISSF有显著改善。     

Automated air defense system using knowledge-based system

The proposed KAAD (knowledge-based automated air defense) system demonstrates a man-machine environment for airspace defense systems. When the unknown aircraft is hostile, a threat rating and response methods are generated by the system. It serves as a double-check decision-making system for a war control center. In addition to this application, the KAAD system can also be a useful tool as a training program for the war controller. The capabilities of the system are limited due to the shortage of knowledge resources. It requires communications among war controllers and air fighter pilots to organize a practical knowledge base. It is shown that the KAAD system can be combined with an automated ATC (air traffic control) system to become a practical system for air defense applications     

有限体积法的分析与改进

本文对以Jameson为代表提出的常用的一种有限体积法进行了较深入的分析，指出了它的适用范围，网格对计算精度的影响并提出了改进措施。算例表明本文提出的分析与改进措施是正确、有效的。     

Spartan 201 white light coronagraph experiment

A white light coronagraph was launched into orbit aboard the space shuttle OV 103 (Discovery) on 7 April 1993. This device was one of two instruments included in the SPARTAN 201-1 payload, a completely autonomous sub-satellite deployed from the shuttle for a period of about 47 hours. The WLC system is an externally occulted coronagraph system which incorporates a rotating half-wave plate polarimeter, and the image data is used to infer the brightness, the polarized brightness and the degree of polarization of the white light emission from the solar corona. These data are in turn used to infer estimates of the K- and F-coronal brightnesses and density distributions. We shall present preliminary results of the electron density estimate in the coronal streamer and hole region and describe the methods employed.affiliated to USRA     

The Freja wave and plasma density experiment

The Wave Experiment, F4, on the Swedish/German satelliteFreja, is designed to measure the electric wave fields up to 4 MHz, the magnetic wave fields up to 16 kHz and the plasma density and its relative variations up to 2 kHz. Six wave signals and four density probe signals can be measured simultaneously. The wave forms of all signals are transmitted to ground without any analysis onboard. The limited TM allocation does not allow continuous sampling of the wave signals, so normally the measurements are made in snapshots of various lengths dependent on sampling frequency, etc. Continuous sampling can be made for shorter time periods by using a 6 Mbyte memory as a buffer.     

Broadening of Fe X (6374 Å) profiles above the limb in a coronal hole

Profiles of the visible Fe X (6374 Å) coronal emission line as a function of height above the limb were obtained out to 1.16 solar radii in a coronal hole using the NSO/Sacramento Peak Observatory Coronagraph, Universal Spectrograph and a CCD camera. These are the first coronal line profiles obtained as a function of height in a coronal hole from the ground. Analysis of the line widths suggests a large component of nonthermal broadening which increases with height ranging from 40 to 60 km/s, depending upon the assumed temperature or thermal component of the profile.     

Jets and brightenings generated by energy deposition in the middle and upper solar chromosphere

Numerical simulations of energy depositions in the middle and upper solar chromosphere result in ejection of chromospheric material into the corona and heating of the chromospheric gas. These simulations may be capable of describing some of the features seen by the soft X-ray telescope on board theYohkoh satellite.     

Synergism of binocular and motion stereo for passive ranging

Range measurements to objects in the world relative to mobile platforms such as ground or air vehicles are critical for visually aided navigation and obstacle detection/avoidance. An approach is presented that consists of a synergistic combination of two types of passive ranging method: binocular stereo and motion stereo. We show a new way to model the errors in binocular and motion stereo in conjunction with an inertial navigation system (INS) and derive the appropriate Kalman filter to refine the estimates from these two stereo ranging techniques. We present results using laboratory images that show that refined estimates can be optimally combined to give range values which are more accurate than any one of the individual estimates from binocular and motion stereo. By incorporating a blending filter, the approach has the potential of providing accurate, dense range measurements for all the pixels in the field of view (FOV)