Development of the Technique for Calculating the Ejectors with Low Entrainment Ratios

This paper presents the results of an investigation of ejectors with the low entrainment ratio. A technique for calculating the ejectors with a curvilinear axis has been developed. Comparative studies of the performance characteristics of ejectors with the rectilinear axis of the mixing chamber and the curvilinear initial section of the mixing chamber are carried out.     

Periodicities of the LDE-type flare occurrence (1969 - 1992).

The power spectrum was calculated for the time series of the LDE-type flare occurrence during the last three solar cycles (the 20-th, the 21-st and the first part of the 22-nd cycle). LDE-type flares (Long Duration Events in SXR) are associated with the interplanetary protons (SEP and STIP as well), energized coronal arches and radio type IV emission. Generally, in all the cycles considered, LDE-type flares mainly originated during a 6-year interval of the respective cycle (2 years before and 4 years after the sunspot cycle maximum). The following significant periodicities were found: in the 20-th cycle: 1.4, 2.1, 2.9, 4.0, 10.7 and 54.2 of month; in the 21-st cycle: 1.2, 1.6, 2.8, 4.9, 7.8 and 44.5 of month; in the 22-nd cycle, till March 1992: 1.4, 1.8, 2.4, 7.2, 8.7, 11.8 and 29.1 of month; in all interval (1969-1992): 1. the longer periodicities: 232.1, 121.1 (the dominant at 10.1 of year), 80.7, 61.9 and 25.6 of month, 2. the shorter periodicities: 4.7, 5.0, 6.8, 7.9, 9.1, 15.8 and 20.4 of month. Solar variability has an extremely complex time dependence. The Sun is a multiperiodic system. The strong periodicities "near 155 and 270 days" were found also in the LDE-type flare occurrence.     

The concept of selecting the main parameters of a lightweight airplane with regard to the requirements of the contemporary Russian market

The basic principles of selecting some design parameters of a lightweight airplane for the contemporary Russian market are presented. Recommendations for selecting these parameters with the service requirements specified are given based on the study performed.     

Emesis and space motion sickness in amphibians.

Amphibians possess the ability to vomit in response to a variety of stimuli that provoke emesis in mammals. Pharmacological studies have establish that the ejection of gastric contents and the basic mechanism for vomiting have been phylogenetically conserved among these tetrapods. As part of on-going comparative studies on emesis in vertebrates, we previously documented that some postmetamorphic anurans and salamander larvae experience motion-induced emesis when exposed to the provocative stimulus of parabolic aircraft flight. However, more recent experiments suggest that there are strict conditions for inducing emesis in amphibians exposed to parabolic flight and that amphibians are not as sensitive to this stimulus as mammals. Further studies on emesis in lower vertebrates may help us understand the processes that cause emesis in abnormal gravitational regimes.     

Integration test project of CEEF--a test bed for Closed Ecological Life Support Systems.

CEEF (Closed Ecology Experiment Facilities) were installed at Rokkasho village in northern Japan, for the purpose of clarifying life-support mechanisms in a completely closed space, such as a Lunar or Mars base. An integration test using the Closed Plantation Experiment Facility and Closed Animal Breeding & Habitation Experiment Facility is needed before conducting an entire closed experiment including plants, animals and humans. These integration tests are planned to be conducted step by step from fiscal 2001 to 2008.     

Determination of parameters of rotational motion of the <Emphasis Type="Italic">Monitor-E</Emphasis> spacecraft from the telemetry data on solar batteries’ current

The Monitor-E spacecraft executed uncontrolled flight due to emergency situation, no telemetry information on parameters of the spacecraft’s attitude motion being available. So, the problem arose to determine the spacecraft’s rotational motion from the accessible indirect information—the electric current provided by solar batteries. In this paper the integrated statistical technique is described, that allows one to solve this problem. The values of current, obtained over the time interval some tens of minutes long, have been processed simultaneously by the least squares method using the integration of the equations of spacecraft’s rotational motion. As a result of processing, the initial conditions of motion were estimated, and the spacecraft’s moments of inertia were updated, as well as the angles, specifying solar batteries position in the spacecraft-fixed coordinate system. The results of processing of 12 data sets are presented, which allowed us to reconstruct the actual rotational motion of the spacecraft.     

Asymptotic theory for thrusting,spinning-up spacecraft maneuvers

We consider the problem of a spacecraft subjected to constant body-fixed forces and moments about all three axes during a spinning-up, thrusting maneuver. In applications, undesired forces and moments can arise due to thruster imbalances and misalignments and to center-of-mass offset. In previous works, approximate analytical solutions have been found for the attitude motion, and for the change in inertial velocity and inertial position. In this paper we find asymptotic and limiting-case expressions which we derive from the analytic solutions, in order to obtain simplified, practical formulas that lend insight into the motion. Specifically, we investigate how the motion evolves (1) as time grows without bound and (2) for geometric cases of the sphere, the thin rod, and the thin plate. Closed-forms or upper-bound limits are provided for angular velocities, Eulerian angles, angular momentum pointing error, transverse and axial velocities, and transverse and axial displacements. Summaries for the asymptotic limits (for zero initial conditions) are provided in tabular form. Results are verified by numerical simulations.     

Guidance and Control of Missile Interceptor using Second-Order Sliding Modes

A new smooth second-order sliding mode control (SSOSM) is proposed and proved for a system driven by uncertain sufficiently smooth disturbances. The main target application of this technique, the missile interceptor guidance-control system against targets performing evasive maneuvers, is considered to demonstrate benefits of this design for a two-loop integration of guidance and flight control systems. The designed guidance-control system performance is verified via computer simulations using a miniature hypervelocity kinetic energy endo-atmospheric interceptor planar model.     

Compact antennas for UWB applications

A report on an investigation of spherical, disc, and half-disc antennas in the frequency and time domains with the objective of developing small planar versions of the antennas. These antennas have an omni-directional impulse response in azimuth and pulse duration of 0.5-0.65 nanoseconds. In addition, the measured data show a reasonable peak received signal in a pulse communication link using two identical antennas.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.