Pareto-optimal solution of a two-objective problem in choosing conditions of monoimpeller milling

A problem of optimization of cutting parameters with respect to the criteria of maximum efficiency and maximum tool resistance is formulated. To solve the problem, a method is developed and applied for determining the Pareto-optimal values of machining conditions in milling the present-day GTE monoimpeller blade passages with a circular milling cutter.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

Solar activity dependence of total electron content derived from GPS observations over Mbarara

Vertical total electron content (VTEC) observed at Mbarara (geographic co-ordinates: 0.60°S, 30.74°E; geomagnetic coordinates: 10.22°S, 102.36°E), Uganda, for the period 2001–2009 have been used to study the diurnal, seasonal and solar activity variations. The daily values of the 10.7 cm radio flux (F_10.7) and sunspot number (R) were used to represent Solar Extreme Ultraviolet Variability (EUV). VTEC is generally higher during high solar activity period for all the seasons and increases from 0600 h LT and reaches its maximum value within 1400 h–1500 h LT. All analysed linear and quadratic fits demonstrate positive VTEC-F_10.7 and positive VTEC-R correlation, with all fits at 0000 h and 1400 h LT being significant with a confidence level of 95% when both linear and quadratic models are used. All the fits at 0600 h LT are insignificant with a confidence level of 95%. Generally, over Mbarara, quadratic fit shows that VTEC saturates during all seasons for F_10.7 more than 200 units and R more than 150 units. The result of this study can be used to improve the International Reference Ionosphere (IRI) prediction of TEC around the equatorial region of the African sector.     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

Approaches in the determination of plant nutrient uptake and distribution in space flight conditions.

The effective growth and development of vascular plants rely on the adequate availability of water and nutrients. Inefficiency in either the initial absorption, transportation, or distribution of these elements are factors which impinge on plant structure and metabolic integrity. The potential effect of space flight and microgravity conditions on the efficiency of these processes is unclear. Limitations in the available quantity of space-grown plant material and the sensitivity of routine analytical techniques have made an evaluation of these processes impractical. However, the recent introduction of new plant cultivating methodologies supporting the application of radionuclide elements and subsequent autoradiography techniques provides a highly sensitive investigative approach amenable to space flight studies. Experiments involving the use of gel based 'nutrient packs' and the radionuclides calcium-45 and iron-59 were conducted on the Shuttle mission STS-94. Uptake rates of the radionuclides between ground and flight plant material appeared comparable.     

Near-real time monitoring of the TEC fluctuations over the northern hemisphere using GNSS permanent networks

Since the early 1990s, global positioning system measurements have been used to study of the state and rapid changes of the Total Electron Content in the ionosphere. Currently, the increasing number of permanent stations makes it possible to generate maps of the irregularities in the ionosphere for specified regions with sub-daily resolution. The main goal of this work was to apply global navigation satellite system observations to obtain information about ionospheric variability around the North Geomagnetic Pole. In order to detect the ionospheric disturbances, 30-s observation data was used. The Rate of Total Electron Content Index was applied as a measure of the variability in the ionosphere. The first analyses were executed using more than 100 permanent stations. The results show two kinds of products: 2-hour maps in spherical geomagnetic coordinates and daily maps presenting the occurrence of the strong Total Electron Content fluctuations as a magnetic local time function, for the most disturbed days of April 2010. Apart from the main product of the algorithm, the Rate of Total Electron Content time series for individual satellite tracks was presented. The results demonstrated very good sensitivity of the obtained maps, which can detect even quite weak disturbances. The presented algorithm developed at the Geodynamic Research Laboratory of the University of Warmia and Mazury, in cooperation with Institute of Terrestrial Magnetism, Ionosphere and Radiowave Propagation, will be applied in the near future to create near-real time service of the conditions in the ionosphere based on the Global Navigation Satellite Systems observations.     

Programmable, multi-purpose opto-electronic sensor system

Optical fibre sensing is becoming increasingly attractive in both the smart structure sphere of interest as well as the medical and industrial concerns. Fibre-optic interferometric sensors can be designed as compact and robust transducers. In general, the transduction mechanism involves the phase modulation of coherent or monochromatic light propagating through a fibre-optic cable, and detecting the changes in the energy associated with this phase change. Sensors based on this technique can generally be configured to be quite sensitive and measurements of a wide variety of physical parameters are achievable. Intrinsic features of optical fibres, such as immunity to electromagnetic interference, flexibility, thinness, strength and weight, make this ideal for sensor technology. In the process of developing fibre-optic sensors for laboratory experimentation, as well as generalised research, an appropriate, easy to use opto-electronic drive and measurement system is required. This paper discusses the operation of a programmable opto-electronic drive and measurement system     

Optimum Acquisition of the Idling First-Order Phase-Locked Loop

Acquisition of the idling first-order phase-locked loop (PLL) is investigated. An analytical solution for the Fokker-Planck equation is found if the noise term is neglected. Furthermore, the modulation signal that optimizes the acquisition is obtained by use of phase-plane techniques and Pontryagin's minimum principle.