Periodic components in Cyg X-3

Hard X-ray observations of Cyg X-3 in the energy range 20–100 keV were made with a Balloon-borne telescope using two large area proportional counters. The source was seen with a total significance of 20.

A 121 s periodicity was seen during Fourier analysis of the data. The phenomenon can be interpreted as due to transient pulsation since no other peak was seen in our data. Quasi-periodic oscillation in the range 0.06–20 mHz have been observed from Cyg X-3 at lower energies. Interestingly, most of the reported periods are multiple of the present measurements. The observed pulsation at high energies indicate the occasional unstable behaviour of the inner parts of the accretion disk connected with the basic rotation period of the compact object.

The 4.8^h modulation, characteristic of the orbital period of the binary system was seen in the data, with a broad maximum between the phase 0.3 to 0.7.     

CLVD 法制备C/C复合材料工艺探索研究

研究了采用化学液气相沉积法制备C／C复合材料的工艺过程，分析了不同预制件、温度、浸泡时间等工艺参数对致密速度、效果的影响，并总结出了一套快速高效的致密方法。     

Recursive temporal-spatial information fusion with applications totarget identification

Centralized/distributed recursive algorithms for temporal-spatial information integration using the Dempster-Shafer technique are developed. Compared with the Bayesian approach, the Dempster-Shafer technique has the strong capability of handling information uncertainties, which are particularly desirable in many applications. In the centralized integration algorithm, all information is pooled into the central processor and integrated. In contrast, the distributed integration algorithm shares the computational burden among the local processors, which increases the computational efficiency. The developed algorithms are effectively applied to a target identification problem with three sensors: identification of friend-foe-neutral (IFFN), electronic support measurement (ESM), and infrared search and track (IRST)     

Implications of previous space commercialization experiences for the reusable launch vehicle

In evaluating the prospects for the development of a commercially viable RLV, it may be useful to examine ’lessons learned‘ from previous space commercialization efforts– both those that succeeded and those that did not. It can be argued that several distinct streams of market and technological development may have to converge for successful commercialization of space systems to occur. Factors influencing the prospects for commercialization include the size and growth rate of the potential customer base, the extent to which a governmental customer exists to underpin the market, the development of associated ’value-added‘ markets, the stability of governmental policies, the availability of enabling or enhancing infrastructure, the levels of technological and business risk, and the degree to which competitive markets exist. This paper examines two previous space commercialization experiences, evaluates the relative importance of the various factors that influence the prospects for success of commercialization efforts, and assesses the implications of those factors for the commercial viability of the proposed RLV.     

Autoignition of fuel-oxidizer mixtures in microgravity

The paper examines the limitations of quasi-steady autoignition theory in providing information needed for the characterization of autoignition temperature fields. Time-dependent autoignition theory is then utilized to examine the autoignition behavior of a reactive system where both wall catalysis and gas phase kinetic rates are significant. It is found that a diverse range of space-time temperature-composition-pressure histories is possible, depending on the system's thermo-kinetic characteristics.     

Fuel Savings in the WHECON Attitude Control System Using an Asymmetric Controller

This paper investigates the possibility of generating an on-off limit cycle mode in the WHECON attitude control system. lt is shown that, by eliminating the off set angle ? in the roll-actuated control torquer, the WHECON system can be reduced to the structure considered earlier by Mendel and, therefore, an on-off limit cycle can be generated simply by introducing an appropriate amount of asymmetry into the deadzone characteristic of the WHECON controller. Because with this mode of on-off limit cycle the thruster jets will fire only once in each cycle of the oscillation, it is claimed that a considerable amount of fuel can be saved by the proposed modifications to the original WHECON design. Dynamic simulation study was conducted with the actual nonlinear model of the WHECON system considered and the results indicate that, for both zero and nonzero values of the off set angle ?, substantial fuel savings can be achieved by using the asymmetric controller.     

Simplified Optimum Modulation Indices

The design of a narrowband, phase-modulated, multisubcarrier, phase-coherent, space-communication system requires that the subcarrier modulation indices be kept within close tolerance limits. This need arises since the modulation indices directly affect the division of power among the carrier and subcarriers. If the system is not designed in an optimum manner to handle large tolerance variation, the system performance may degrade sharply in an adverse environment. A universal graphical technique?modulation loss contours?is developed as a design tool for the ?optimum? selection of modulation indices. The technique is novel in that it yields solutions directly from the universal curves and does not require the drawing of additional curves. Two criteria of optimization are considered, simultaneous thresholding and minimal sensitivity. The minimally sensitive case is considered as weighted simultaneous thresholding and is solved by the aid of a graphical algorithm. The technique is applicable to k subcarriers (sinusoidal and/or square wave), considering three subcarriers at a time-two subcarriers as direct variables and the third as a parameter?all other subcarriers remaining constant. Previous techniques required trial and error methods, drawing of curves, or computerized search techniques to arrive at the proper modulation indices and maximum tolerance bands. This method allows a quick solution to the tolerance problem and optimum selection of modulation indices, facilitating the design and/or analysis of narrowband PM systems.     

Elemental and isotopic abundances of the volatile elements in the outer planets

Certain fundamental scientific problems of a cosmological as well as cosmogonic character, may be solved by the insertion of entry probes into the atmospheres of the outer planets. It is recommended that attempts be made to determine the elemental and isotopic abundances of H, D, He³, He⁴, C, N, O, S, and the rare gas elements. These determinations should cast much light on the processes which participated in the assembly of the giant planets. This would give powerful boundary conditions on theories of the origin of the solar system, and would also give additional experimental information bearing on cosmology.This is one of the publications by the Science Advisory Group.