Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.     

Viscous fluid flow in an elastic pipeline

Basic equations of hydrodynamics in an elastic pipeline that are found using the vectorial notation of Newton’s law for a viscous fluid are presented. An analog of Poiseuille’s formula for the fluid flowrate in the elastic pipeline and the results of the comparative analysis of a viscous flow in elastic and rigid pipelines are given. It is shown that the ratio of the maximal fluid velocity in the pipeline cross section and the section-average velocity is similar for elastic and rigid pipelines.     

Investigation of promising ceramic materials in discharge chambers of stationary plasma thrusters

The characteristics of the insulator wear process in the discharge chamber of a stationary plasma thruster (SPT) are analyzed. The results of studying the erosion resistance to ionic spraying of different ceramic compositions are presented. It is shown experimentally that the integral characteristics (the value of thrust and thrust efficiency) as well as the SPT lifetime can be improved in changing from the conventional hot-pressed boron silicate (BN + SiO₂) ceramics to the BN + Si₃N₄ ceramic compositions.     

Physical properties of dust grains deduced by optical probing techniques

In-situ space observations of dust in the solar system are seldom possible. On the opposite, remote observations of solar light scattered by dust are relatively easy to perform from Earth- or satellite-based observatories; the evolution of the polarization of light scattered by dust particles as a function of the phase angle may provide information on the physical properties of these particles. Unfortunately, since remote observations are integrated along the line-of-sight of the observer, they can hardly be used to determine local physical properties. We have precisely developed Optical Probe techniques to forge the link between the numerous remote observations and the unique in-situ measurements. A short review of the remote observations of light scattered by cometary dust is first presented. Then, the Optical Probe concept is analyzed. Finally, the OPE instrument, which had been designed to optically probe the inner coma of comet Halley is described; its limitations and its achievements during Halley and Grigg-Skjellerup encounters are discussed.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

昆虫翅悬停飞行中的三维空间旋涡结构

昆虫(果蝇)悬停飞行中,翅膀按照特定的拍动方式往复运动,产生非定常高升力维持身体的平衡.研究昆虫高升力机理,需要探索拍动翼运动引发的三维空间非定常流场的特性,尤其是三维空间非定常涡的发展变化过程.本文将氢气泡流动显示技术应用于动态模型实验,定性的观察拍动翼前缘涡(LEV)的发展破裂过程.并利用数字体视粒子图像测速,DSPIV(Digital Steroscopic Particle Image Velocimetry)技术,测得了拍动翼运动瞬时相位和相位平均的三维空间流场信息(速度向量场、截面涡量场、空间涡量场,以及三维空间流线),揭示了拍动翼展向流动的存在,并结合定性和定量方法多角度说明了前缘涡沿展向发展到破裂的流动结构,并说明了侧缘涡与前缘涡的相互影响.测量结果表明:在雷诺数960的情况下,拍动翼运动至相位时,翼面上前缘涡在距翼根约60%展长的位置发生破裂;翼根至破裂点之间,展向流动稳定,指向翼梢;破裂点以后,展向流改变方向,指向翼根.     

The effects of microgravity on induced mutation in Escherichia coli and Saccharomyces cerevisiae.

We examined whether microgravity influences the induced-mutation frequencies through in vivo experiments during space flight aboard the space shuttle Discovery (STS-91). We prepared dried samples of repair-deficient strains and parental strains of Escherichia (E.) coli and Saccharomyces (S.) cerevisiae given DNA damage treatment. After culture in space, we measured the induced-mutation frequencies and SOS-responses under microgravity. The experimental findings indicate that almost the same induced-mutation frequencies and SOS-responses of space samples were observed in both strains compared with the ground control samples. It is suggested that microgravity might not influence induced-mutation frequencies and SOS-responses at the stages of DNA replication and/or DNA repair. In addition, we developed a new experimental apparatus for space experiments to culture and freeze stocks of E. coli and S. cerevisiae cells.     

Study of the variability of blazars gamma-ray emission

The γ-ray emission of blazar jets shows a pronounced variability and this feature provides limits to the size and to the speed of the emitting region. We study the γ-ray variability of bright blazars using data from the first 18 months of activity of the Large Area Telescope on the Fermi Gamma-Ray Space Telescope. From the daily light-curves of the blazars characterized by a remarkable activity, we firstly determine the minimum variability time-scale, giving an upper limit for the size of the emitting region of the sources, assumed to be spheroidal blobs in relativistic motion. These regions must be smaller than ∼10⁻³ parsec. Another interesting time-scale is the duration of the outbursts. We conclude that they cannot correspond to radiation produced by a single blob moving relativistically along the jet, but they are either the signature of emission from a standing shock extracting energy from a modulated jet, or the superposition of a number of flares occurring on a shorter time-scale. We also derive lower limits on the bulk Lorentz factor needed to make the emitting region transparent for gamma-rays interacting through photon–photon collisions.     

Improvement of gas-dynamic efficiency of GTE gas turbine stages at the design stage

Methods to control flow have been considered in order to reduce end losses in blade rows of GTE gas turbines by means of measures taken at the design stage.