Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

Effect of weightlessness on posture and movement control during a whole body reaching task

Here are reported preliminary results of the “Synergy” experiment performed aboard the Russian orbital station “MIR” in July 1993 (Altaïr Mission). The experiment was carried out before, during, and after the space flight of two astronauts (S1 and S2). The duration of the flight was 21 days for S1 and 6 month for S2. The subjects were tested during preflight, inflight and postflight. The astronaut subjects were fixed on the ground by the feet. They were asked to pick up a box in front of them on the ground. Two velocities of movement and two distances of the target to be reached were tested. The movement of several small markers placed on the body was recorded on video tape.

Results show that the shape of head and hand trajectories in the sagittal plane remains roughly the same during the flight in spite of the modification of mechanical constraints. Trajectory invariance does not result in joint angular displacement invariance. These data indicate that the planning of the movement takes place in terms of head and hand trajectories rather than joint rotations as it was previously suggested for simple arm reaching movement.     

Structural and functional changes in man accompanying the weightlessness in "Skylab" flights: a mathematical approach

The present paper reports a kinetic analysis of changes of some physiological parameters, obtained from international literature, after changes in gravitational environment. The overall phenomenology of the adaptation to weightlessness is characterized by a rapid process followed by a slow one. The two processes show half time values differing by about five times. Also in the case of readaptation to gravity, after recovery on the Earth, two well resolved processes, showing different half time values, are observed. It is of interest to notice that the rate of response to weightlessness is lower than that to gravity. Of course, the half time values observed depend on the different physiological parameters considered. In any case, the experimental data suggest a general trend of many adaptive changes, that may all be described by a simple mathematical model.     

Skylab experiment M-092: results of the first manned mission

Blood pressure at 30-sec intervals, heart rate, and percentage increase in leg volume continuously were recorded during a 25-min protocol in the M092 Inflight Lower Body Negative Pressure (LBNP) experiment carried out in the first manned Skylab mission. These data were collected during six tests on each crewman over a 5-month preflight period. The protocol consisted of a 5-min resting control period, 1 min at -8, 1 min at -16, 3 min at -30, 5 min at -40, and 5 min at -50 mm Hg LBNP. A 5-min recovery period followed. Inflight tests were performed at approximately 3-day intervals through the 28-day mission. Individual variations in cardiovascular responses to LBNP during the preflight period continued to be demonstrated in the inflight tests. Measurements of the calf indicated that a large volume of fluid was shifted out of the legs early in the flight and that a slower decrease in leg volume, presumably due to loss of muscle tissue, continued throughout the flight. Resting heart rates tended to be low early in the flight and to increase slightly as the flight progressed. Resting blood pressure varied but usually was characterized by slightly elevated systolic blood pressure, lower diastolic pressure, and higher pulse pressures than during preflight examinations. During LBNP inflight a much greater increase in leg volume occurred than in preflight tests. Large increases occurred even at the smallest levels of negative pressure, suggesting that the veins of the legs were relatively empty at the beginning of the LBNP. The greater volume of blood pooled in the legs was associated with greater increases of heart rate and diastolic pressure and larger falls of systolic and pulse pressure than seen in preflight tests. The LBNP protocol represented a greater stress inflight, and on three occasions it was necessary to stop the test early because of impending syncopal reactions. LBNP responses inflight appeared to predict the degree of postflight orthostatic intolerance. Postflight responses to LBNP during the first 48 hours were characterized by marked elevations of heart rate and instability of blood pressure. In addition, systolic and diastolic pressures were typically elevated considerably both at rest and also during stress. The time required for cardiovascular responses to return to preflight levels was much slower than in the case of Apollo crewmen.     

靶场外测数据野值点的统计诊断技术

本文修正了野值点的数学描述性定义，建立了野值的分类模型，创立了多个野值点及野值斑点的“稳健－似然比”检验技术，并进行了仿真计算。     

固体发动机复合材料壳体密封隔热涂层研究和应用

研制了以室温硫化硅橡胶为基料并进行了改性的固体火箭发动机密封用隔热涂层。其性能满足工作压强４０－５０ＭＰａ，燃烧温度３０００－３５００℃，飞行过载６０００ｇ的工作条件下的某发动机要求，已得到成功应用。     

一种新型环氧树脂体系的固化动力学及耐热性研究

通过不同升温速率下DSC研究了E51环氧树脂与DIA芳香胺固化体系的固化工艺、固化交联反应动力学参数及树脂体系的耐热性,利用FTIR方法计算了体系的固化度。通过分析确定了树脂的固化工艺,采用Kissinger、Ozawa法计算出树脂表观活化能,其均值为87.02kJ/mol,结合Crane公式求出反应级数为0.93。采用扭辫法测得玻璃化转变温度Tg=178℃。热失重曲线表明,体系的起始分解温度为364℃。     

螺栓挤压推力终止系统验证试验

本文总结了螺栓挤压推力终止系统(BETTS)的设计、研制和验证试验。该系统在阿诺德工程研制中心(AEDC)进行了多次冷试,一次海平面热试和两次高空点火推力终止试验,试验所用的发动机是政府向化学系统分公司提供的“民兵”发动机空壳体装药后制成的。通过大发动机热试,证明本计划所验证的这种BETTS可以消除前部碎片,大大地简化药柱和发动机壳体的设计,提高末级性能。另外,这种方法设计简单,从而可以降低推进系统的成本。BETTS用爆炸螺栓和挤压螺栓的组合代替连接喷管法兰和发动机壳体法兰的普通螺栓。接到指令后,爆炸螺栓立即打开,喷管循着挤压螺栓向后平移,发动机气体迅速排出,从而使推进剂熄火。挤压螺栓控制着喷管的移动速度和最大运动行程。以前根据NO.F04611—75—C—0044合同(CSD计划2549)曾成功地在缩比发动机上进行了BETTS热试和在飞行重量的“民兵”Ⅲ第三级发动机上进行了冷试。     

HTPB推进剂的老化及使用寿命

为了进行老化评价研究,选择和研制了三种不同固体含量的(88～91%)端羟基聚丁二烯(HTPB)推进剂。已经证实,88%固体含量的HTPB推进剂符合以前提出的老化模型。这种老化模型已成功地进一步用于较高固体含量的推进剂以及其它计划用的HTPB推进剂的实测力学性能老化数据。采用这种老化模型,根据加速热老化试验数据予测了长期力学性能,予测数据与六年实测老化数据相当一致。利用予测的推进剂破坏性能,结合火箭发动机的要求,来确定予先选定安全裕度的发动机药柱的使用寿命。本文列出了各种复合推进剂老化速率的比较数据。根据老化结果的分析,提出了一个宽范围老化行为的数学表达式。     

超声波测温技术进展

超声波测温比传统的测温方法可以达到更快速、更精确、测温范围更宽的要求，以满足工业生产、科学研究中温度精确测量和在线控制的需要，特别是在高温和恶劣的测温环境中。回顾了超声波测温技术近３０年来的发展，着重介绍了超声测温原理和两种主要方法，分析了用于液态金属温度测量的可行性并给出了用超声技术测量液态铝温度的实验装置和初步实验结果。