弹道靶中超高速发射弹的流场及空气动力特性研究(英)

本文描述的是研究爆炸成型发射弹（ＥＦＰ）模型的流场及超高速空气动力特性所用的弹道试验设备;简要报导了记录全尺寸干涉图形的技术;对径向密度分布再现的方法进行了讨论;在零攻角实验时不同模型的空气动力阻力是采用简化方法来计算的;对各种不同ＥＦＰ型式的气动稳定性提出了定性估计的方法;并阐述了用于组合体超高速飞行特性研究的数值计算技术的基本原理     

收敛形进气道数值研究的验证

介绍一种新型的、具有最小喉道面积的三维高超声速进气道 (称之为收敛形进气道 )的数值和实验研究结果。表明使用这种形式的进气道 ,在整个飞行速度范围内可以降低阻力和高超声速发动机表面的热防护要求 ,通过降低外压缩表面的倾斜度和减少进气道及燃烧室壁的面积就可以做到这一点。在采用低维次流动的气体动力设计方法的基础上设计成这种形式的进气道。计算是在无粘气体模型构架内用有限体积法进行的。同时用边界层方程计算出计及粘性的气流特性和进气道特性。数值算法是通过收敛形进气道的有限宽楔形外压缩表面的计算和实验数据来验证的。进行实验研究的马赫数M=2～ 1 0 7,基于模型进气道高度的雷诺数Re=( 1～ 5) × 1 0 6。数值计算与实验结果一致性很好。这些结果也和通常的二维进气道的数据作了比较。     

褶皱结构成形时的形状偏差计算

解决了褶皱结构成形时相邻的平行四边形平面元素之间连接区棱的修圆半径值预测问题。把毛坯模拟成薄板，定义了平行四边形平面元素的边界条件，采用能量法导出挠度和力函数的非线性微分方程组，利用积分－差分法实现其数值解，并提供计算结果和分析应力－应变场。采用的计算方法可用于研究毛坯的刚度参数和工艺参数对褶皱结构的形状影响。     

用薄板等积变换方法制造起伏构造的工艺问题研究(英文)

研究了用于夹层壁板的新型轻质芯材的制造问题。该种芯材是一种可改变平面方向的褶皱构造。采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。其主要难点在于 ,必须实现沿复杂的展开图上所有的画线同时弯曲。现借助于成形过程中使原来的构形组件变形解决其造型问题。本文提出的工艺方法可用于不同材料的深度起伏构造制造 ,如金属薄板和纸等。     

Dynamics of Planetary Waves in the Ionosphere as Observed from GPS Satellites

The GPS satellite data are used to study the dynamics of the ionospheric total electron content (TEC) over Central Europe in the summer season from June 23 to September 30, 1996. The TEC variations within the range of periods typical of the planetary waves were found to be nearly synchronous with the neutral wind variations in the mesosphere and with the variations in the occurrence of ionospheric sporadic layers. The observed TEC variations were interpreted as the result of penetration of energy carried by nonstationary Rossby waves to the upper atmospheric altitudes.     

Orbiting solar telescope on “Salyut-4” station

The orbiting solar telescope on Salyut-4 (F = 2,5 m, d = 250 mm) produces images of the Sun on the entrance slit of a stigmatic two-grating spectrograph (R₁ = 1 m, N₁ = 1200 lines/mm; R₂ = 0.5 m, N₂ = 2400 lines/mm, dispersion 16 Å/mm, spectral resolution 0,3 Å). The automatic system keeps the observed solar features on the slit of the spectrograph with an accuracy of 3–4 arc sec. The far UV-spectra (970–1400 Å) of solar flares, brightenings, flocculi and prominences were photographed and fresh coatings of mirrors were made during the flight.     

Advanced Pulsed Plasma Thrusters and Their Application as a Part of Small Spacecraft Propulsion Systems

The paper presents the research results of the effect of a capacitor energy storage device configuration on the specific characteristics of advanced modern propulsion systems based on the ablative pulsed plasma thrusters (APPT). These thrusters are designed to perform specific tasks within the small spacecrafts with the onboard power capacity up to 200 W.     

A broad climatology of very high latitude substorms

Magnetic data from a newly commissioned Indian Antarctic station Bharati (corrected geomagnetic (CGM) coordinates 74.7°S, 97.2°E) and closely-spaced IMAGE chain observatories (∼100° magnetic meridian in Northern hemisphere) has been analyzed to study the climatology of substorms which were localized poleward of the standard auroral oval. We considered four austral summers (year 2007–2010) when data from Bharati was available. Several very high latitude substorms were observed in this duration when the solar activity remained unexpectedly low for a long time. Various features of very high latitude substorms, e.g., local time dependence, interplanetary state, hemispherical asymmetry and their nightside low latitude signatures are examined. Events studied here, suggested the following properties of substorms occurring at very high latitudes: (1) maximum occurrence was observed near magnetic midnight (21:00–02:00 MLT). (2) In contradiction to earlier reports, many substorms were observed even during negative IMF Bz condition. In addition, majority of substorms occurred during low or moderate solar wind streams. (3) Magnetic signatures were often pronounced in the winter hemisphere. (4) Even if widely used standard AE indices fail to monitor very high latitude substorms, their low latitude signatures are often evident.     

Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination −13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. −1.8°; mag. declination −15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. −11.1°; mag. declination −14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F₃ layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.     

A high-performance ground-based prototype of horn-type sequential vegetable production facility for life support system in space

Vegetable cultivation plays a crucial role in dietary supplements and psychosocial benefits of the crew during manned space flight. Here we developed a ground-based prototype of horn-type sequential vegetable production facility, named Horn-type Producer (HTP), which was capable of simulating the microgravity effect and the continuous cultivation of leaf–vegetables on root modules. The growth chamber of the facility had a volume of 0.12 m³, characterized by a three-stage space expansion with plant growth. The planting surface of 0.154 m² was comprised of six ring-shaped root modules with a fibrous ion-exchange resin substrate. Root modules were fastened to a central porous tube supplying water, and moved forward with plant growth. The total illuminated crop area of 0.567 m² was provided by a combination of red and white light emitting diodes on the internal surfaces. In tests with a 24-h photoperiod, the productivity of the HTP at 0.3 kW for lettuce achieved 254.3 g eatable biomass per week. Long-term operation of the HTP did not alter vegetable nutrition composition to any great extent. Furthermore, the efficiency of the HTP, based on the Q-criterion, was 7 × 10⁻⁴ g² m⁻³ J⁻¹. These results show that the HTP exhibited high productivity, stable quality, and good efficiency in the process of planting lettuce, indicative of an interesting design for space vegetable production.