Optimization and improvement of ac resistance calculation method for multi-phase parallel-wiring cables

Parallel-wiring cables are often used in multi-phase AC aircraft Electrical Power Systems(EPSs). However, it complicates the ac resistance estimation. To solve this issue, an analytical resistance calculation method for parallel-wiring cables in multi-phase EPS was proposed. Firstly, the existing calculation formula of proximity factor was optimized, and the calculation error was reduced from 16% to 2% when two conductors are close to each other. Afterwards, the superposition effect on current d...     

An efficient and globally optimal solution to perspective-n-line problem

This research develops an accurate and efficient method for the Perspective-n-Line(Pn L)problem. The developed method addresses and solves Pn L via exploiting the problem’s geometry in a non-linear least squares fashion. Specifically, by representing the rotation matrix with a novel quaternion parameterization, the Pn L problem is first decomposed into four independent subproblems. Then, each subproblem is reformulated as an unconstrained minimization problem, in which the Kronecker product is a...     

Research on Feature Extraction of Remnant Particles of Aerospace Relays

The existence of remnant particles, which significantly reduce the reliability of relays, is a serious problem for aerospace relays. The traditional method for detecting remnant particles—particle impact noise detection (PIND)—can be used merely to detect the existence of the particle; it is not able to provide any information about the particles’ material. However, information on the material of the particles is very helpful for analyzing the causes of remnants. By analyzing the output acoustic signals from a PIND tester, this paper proposes three feature extraction methods: unit energy average pulse durative time, shape parameter of signal power spectral density (PSD), and pulse linear predictive coding coefficient sequence. These methods allow identified remnants to be classified into four categories based on their material. Furthermore, we prove the validity of this new method by processing PIND signals from actual tests.     

固体颗粒对喷流流场及底部热环境影响规律研究（英文）

Compared with using liquid rocket engines, there are a lot of high-temperature solid particles in the solid-liquid bundled rocket, which make the rocket base thermal environment worse. In order to study the influence of high-temperature solid particles on the base thermal environment, firstly, the effect of particle diameter on the jet distribution and the thermal environment in a single solid motor jet was analyzed using a numerical simulation method, and the results were compared with those of...     

嵌入式80186EB微处理器简化智能网卡的设计

介绍了高集成度嵌入式 16位微处理器 80 186EB的内部组成与特点 ,并说明了采用 80 186EB设计EthernetLAN智能通信网卡的硬件电路及系统资源初始化软件。     

Study on Microwave Dielectric Property of Carbon Black and Short Carbon Fibers

Carbon black and carbon fibers of different lengths were introduced in different matrices at different ratios to explore their microwave dielectric properties under 8.2 GHz-12.4 GHz. It is found that the actual dielectric constants of the samples containing carbon black are in a two-order function of the contents of carbon black （ε＇, ε＂=Av2＋Bv＋C） and the complex dielectric constants show an obvious frequency response. Of the added fibers of different lengths, the 4 mm-long one could well disperse in the matrices having not only good frequency response, but also larger real parts, imaginary parts and loss values. The imaginary parts and the loss values （tanδ）of the samples with 4 mm-long carbon fibers added increase linearly with the contents of fiber increasing. So it is practicable to adjust the dielectric parameters of the material in a wide range by changing the added amount of carbon black, and the carbon fiber or altering the lengths of the carbon fiber added.     

Calibration method of quartz accelerometer on dynamic centrifuge

This paper proposes a novel method for calibrating error coefficients of the quartz accelerometer faster on the dynamic centrifuge, which can generate a continuous dynamic acceleration excitation. Firstly, working principle and structure of the dynamic centrifuge are analyzed, the error sources and the uncertainty of the dynamic centrifuge are expounded, and relevant coordinate systems are established. Then, according to the characteristics of the input specific forces and the propagating method...     

Development of LM-5 Goes as Planned

2ND TEST RUN OF POWER SYSTEM OF LM-5 1ST STAGE COMPLETED The second test run of the power system of the 1st stage of LM-5 was completed in Beijing at 16:00 Beijing time on March 23.This was the second test since the first one was conducted on February 9 to further verify the correctness and reliability of the 1st stage     

专家知识在在轨管理中应用的设想

随着在轨航天器的种类和数量日趋增多,航天器工作状态的实时监测诊断成为我国航天器长期管理中的重大工程技术课题。文章提出了一种面向对象的航天器实时监测、故障诊断知识描述语言的设计思想,该描述语言具有较强的可扩展性和继承性,能够适应在轨航天器日益增多对地面管理提出的自动化、智能化的迫切要求。     

日本技术试验卫星-Ⅷ在轨运行浅析

简要介绍日本技术试验卫星-Ⅷ的概况,分析了技术试验卫星-Ⅷ的系统设计特点和在轨初始运行情况及故障,并简述了该卫星今后的运行计划。