Inter-satellite link augmented BeiDou-3 orbit determination for precise point positioning

Precise Point Positioning(PPP) requires precise products, including high-accuracy satellite orbit and clock parameters. It is impossible to obtain an orbit solution that is sufficiently accurate for PPP services with a regional tracking network; therefore, satellite orbits are usually estimated by a global tracking network with a large number of ground stations. However, it is expensive to build globally distributed stations. Fortunately, BeiDou-3 satellites carry an InterSatellite Link(ISL) pay...     

Micro powder injection molding of boron carbide components with SiC-Al2O3-Y2O3 sintering additives

Sintering additives and micro-powder injection molding offer an effective method to densify boron carbide（B₄C） and make B₄C components with complex shapes. By adjusting the proportion of three kinds of powders（SiC, Al₂O₃ and Y₂O₃）, four kinds of sintering additives were prepared. The feedstock uniformity, debinding behavior, phase composition and microstructure of micro injection molded B₄C components with different sin...     

An FV-EE model to predict lean blowout limits for gas turbine combustors with different structures and sprays

The occurrence of Lean Blowout(LBO) is a disadvantage that endangers a stable operation of gas turbines. A determination of LBO limits is essential in the design of gas turbine combustors. A semiempirical model is one of the most widely used methods to predict LBO limits.Among the existing semiempirical models for predicting LBO limits, Lefebvre’s LBO model and the Flame Volume(FV) model are particularly suitable for gas turbine combustors. On the basis of Lefebvre’s and FV models, the concept o...     

A learning-based approach for solving shear stress vector distribution from shear-sensitive liquid crystal coating images

A learning-based approach for solving wall shear stresses from Shear-Sensitive Liquid Crystal Coating(SSLCC) color images is presented in this paper. The approach is able to learn and establish the mapping relationship between the SSLCC color-change responses in different observation directions and the shear stress vectors, and then uses the mapping relationship to solve wall shear stress vectors from SSLCC color images. Experimental results show that the proposed approach can solve wall shear s...     

Sea fog detection based on unsupervised domain adaptation

Sea fog detection with remote sensing images is a challenging task. Driven by the different image characteristics between fog and other types of clouds, such as textures and colors, it can be achieved by using image processing methods. Currently, most of the available methods are datadriven and relying on manual annotations. However, because few meteorological observations and buoys over the sea can be realized, obtaining visibility information to help the annotations is difficult. Considering t...     

薄壁件铣削过程加工变形研究进展

机床加工性能和刀具切削性能的发展使得薄壁件的高效率和高精密加工成为可能，也使得薄壁件在航空航天领域得到更广泛应用。薄壁零件结构复杂、刚度低，在铣削过程中易发生变形，因此精准预测与控制薄壁件的加工变形是机加工领域亟需解决的工艺难题。通过对薄壁件分类以及加工工艺分析，归纳总结引起薄壁件加工变形的因素，对加工变形影响最为关键的铣削力计算模型进行简述；结合国内外薄壁件变形预测与控制方法的研究，以弹塑性和数值模拟方法对薄壁件加工变形进行预测，通过加工工艺优化、辅助支撑技术、高速切削技术和数控补偿技术等方法对薄壁件加工过程的变形量进行控制；基于数据驱动数字孪生体的更新迭代，实现薄壁件实际加工过程的孪生及薄壁件变形预测与控制，构建了以数字孪生为平台的薄壁件加工变形预测与控制理论框架；最后对数字孪生在薄壁件加工变形预测及控制的发展与应用提出展望。     

Flow characteristics of integrated motor-pump assembly with phosphate ester medium for aerospace electro-hydrostatic actuators

Motor-pump assembly is the core component of the Aerospace Electro-hydrostatic Actuator(EHA). Thus, the design of the motor pump can be very challenging under conditions of high speed and wide pressure range, especially in particular working mediums. Our ultimate goal is to pursue better flow characteristics under a wide range of working conditions. In this paper, we built a sub-model of the main friction interfaces and a model of single-shaft coaxial motor-pump assembly adopting the method of h...     

Pipelines vibration analysis and control based on clamps' locations optimization of multi-pump system

The violent vibration of hydraulic pipelines in aircraft may cause faults or even an accident, especially for the large aircraft with the multi-pump system because of different vibration sources and complex pipelines system. Aiming to the vibration analysis and control of the multipump system, this paper proposed the clamps’ locations optimization to minimize the system impedance at vibration frequencies. Firstly, the models of the flexible clamp and other components in multi-pump system were es...     

Ion thruster accelerator grid erosion mechanism under extreme conditions of cylindrical erosion and chamfer erosion

In this paper, the abnormal experimental phenomenon on barrel erosion under extreme working conditions in the ultra-long life experiment(>10000 h) of ion thruster ion optics is studied by the Immersed-Finite-Element Particle-In-Cell Monte-Carlo-Collision(IFE-PIC-MCC) method and the grid erosion evaluation model. The transport process of beam ions and Charge Exchange(CEX) ions in the grid system, and the characteristics and mechanisms of the aperture barrel erosion under extreme erosion condit...     

A multi-objective optimization problem research for amphibious operational mission of shipboard helicopters

Airborne landing with shipboard helicopters gradually replaces surface landing to dominate joint amphibious operations. A problem with shipboard helicopter mission planning is conducted in the context of amphibious operations. First, the typical missions of shipborne helicopters in amphibious operations are analyzed. An Amphibious Operational Mission Planning Model for Shipboard Helicopters(AOMPMSH) is established, with the objectives of minimizing the completion time of the amphibious campaign ...