Development Progress of China's First Mars Exploration Mission: Its Scientific Objectives and Payloads

China's first Mars exploration mission is scheduled to be launched in 2020. It aims not only to conduct global and comprehensive exploration of Mars by use of an orbiter but also to carry out in situ observation of key sites on Mars with a rover. This mission focuses on the following studies:topography, geomorphology, geological structure, soil characteristics, water-ice distribution, material composition, atmosphere and ionosphere, surface climate, environmental characteristics, Mars internal structure, and Martian magnetic field. It is comprised of an orbiter, a lander, and a rover equipped with 13 scientific payloads. This article will give an introduction to the mission including mission plan, scientific objectives, scientific payloads, and its recent development progress.      

稀土Y对低膨胀高温合金显微组织和界面的影响

运用分析电子显微术、高分辨电子显微术、化学相分析和 X-射线衍射等方法分析研究了Fe-Ni-Co-Nb-Ti-Si低膨胀高温合金的相组成和相结构 ,以及稀土对合金的组织和性能的影响规律。结果显示 ,微量的稀土主要存在于合金的片状相中 ,并使其晶体结构发生变化。加入适量的稀土 Y后 ,合金片状相变得更加细密、均匀。和不含稀土的低膨胀高温合金相比 ,含 Y的低膨胀高温合金中片状相与基体的晶格错配由 0 .7%下降到 0 .0 7% ,表明界面应力明显下降     

Phase-field Modeling of the Influence of Elastic Field on the Nucleation and Microstructure Evolution in Precipitation

A phase-field method was employed to study the influence of elastic field on the nucleation and microstructure evolution. Two kinds of nucleation process were considered:one using fixed nucleation probability and the other calculated from the classical nucleation theory. In the latter case, the simulated results show that the anisotropic elastic strain field yields significant effects on the behavior of nucleation. With a large lattice misfit between the matrixes and the precipitates, the nucleation process does not appear fully random but displays some spatial correlation and has a preference for the elastic soft direction. However, with a small lattice misfit, this bias does not look quite clear. On the contrary, in the case of fixed nucleation probability, the elastic field has no influence on the nucleation proc- ess. The lattice mismatch also exerts influences on the microstructure morphology: with lattice mismatch becoming larger, the micro- structure proves to align along the elastic soft direction.     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Development of PLC-based Tension Control System

Fiber winding tension is an important factor in the molding techniques of composite material which influences the quality of winding product directly, and the tension control is a key technique in fiber winding techniques. This paper introduces a closed-loop tension control system with the programmable logic controller (PLC) with function modules as its control kernel, the alternating current (AC) servo motor as execute element and the radius-following device to accomplish the real-time radius compensation. The mechanism of the tension control system is analyzed and the numerical model is set up. The compensation technique of the radius of the scroll is analyzed. Experimental results show that the system is well qualified with high control precision and high reaction speed.     

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

It is an inevitable trend of sustainable manufacturing to replace flood and dry machining with minimum quantity lubrication(MQL) technology. Nevertheless, for aeronautical difficult-tomachine materials, MQL couldn’t meet the high demand of cooling and lubrication due to high heat generation during machining. Nano-biolubricants, especially non-toxic carbon group nano-enhancers(CGNs) are used, can solve this technical bottleneck. However, the machining mechanisms under lubrication of CGNs are uncl...     

Investigations on femtosecond laser-induced surface modification and periodic micropatterning with anti-friction properties on Ti6Al4V titanium alloy

Titanium alloys have a wide application in aerospace industries as it has greater strength and low density, but it has poor tribological properties. To improve its friction and wear performance, in present work, a femtosecond laser is used to directly irradiate the Ti6Al4V titanium alloy surface in air conditioning, which results in localized ablation and the formation of periodic microstructures but also a strong pressure wave, propagating the material inside. Through the optimization of proces...     

Parametric study on the flutter sensitivity of a wide-chord hollow fan blade

In recent years, the hollow fan blades have been widely used to meet the demand for light weight and good performance of the aero-engine. However, the relationship between the hollow structure and the aeroelastic stability has not been studied yet in the open literature. In this paper,it has been investigated for an H-shaped hollow fan blade. Before studying the flutter behavior, the methods of parametric modeling and auto-generation of Finite Element Model(FEM) are presented. The influence of t...     

Lean blowout characteristics of spray flame in a multi-swirl staged combustor under different fuel decreasing rates

Lean Blow Out(LBO) poses a significant safety hazard when occurring in aero-engines.Understanding the lower stability limits of gas turbine combustors and the characteristics of spray flame close to LBO are imperative for safe operation. The objective of this work is to evaluate the effects of fuel decreasing rates and pressure drops of the injector on LBO performances in a multiswirl staged combustor equipped with an airblast injector. A set of hardware and control system was developed to reali...     

Regularities between kinematic and aerodynamic characteristics of flexible membrane wing

The kinematic characteristics of flexible membrane wing have vital influences on its aerodynamic characteristics. To deeply explore the regularities between them, time-resolved aerodynamic forces and deformations at different aeroelastic parameters and angles of attack(α) were measured synchronously by wind tunnel experiments. The membrane motion can be mainly divided into two states at α > 0° with various lift-enhancement regularities: Deformed-Steady State(DSS)at pre-stall, and Dynamic Bala...