The Description of the Open Model in College English Teaching

In order to solve the current problems in the college English teaching and meet the demands of the ＂College English Curriculum Requirements＂, the Open Model in College English teaching is proposed in the thesis. The thesis describes the model from the five components,     

分布式序列最近邻多目标跟踪算法

本文提出了一种有效的分布式多目标跟踪算法。分布式跟踪器主要由本地传感器级跟踪器和一和航迹融合器组成。在航迹融合器中，首先将传感器的本地航迹转换为一般坐标系，并用线性卡尔曼滤波器使其同步。     

Mechanistic identification of cutting force coefficients in bull-nose milling process

An improved method to determine cutting force coefficients for bull-nose cutters is proposed based on the semi-mechanistic cutting force model. Due to variations of cutting speed along the tool axis in bull-nose milling, they affect coefficients significantly and may bring remarkable discrepancies in the prediction of cutting forces. Firstly, the bull-nose cutter is regarded as a finite number of axial discs piled up along the tool axis, and the rigid cutting force model is exerted. Then through discretization along cutting edges, the cutting force related to each element is recalculated, which equals to differential force value between the current and previous elements. In addition, coefficient identification adopts the cubic polynomial fitting method with the slice elevation as its horizontal axis. By calculating relations of cutting speed and cutting depth, the influences of speed variations on cutting force can be derived. Thereby, several tests are conducted to calibrate the coefficients using the improved method, which are applied to later force predictions. Eventually, experimental evaluations are discussed to verify the effectiveness. Compared to the conventional method, the results are more accurate and show satisfactory consistency with the simulations. For further applications, the method is instructive to predict the cutting forces in bull-nose milling with lead or tilt angles and can be extended to the selection of cutting parameters.     

Study on ballistic penetration resistance of titanium alloy TC4, Part II: Numerical analysis

Enhancing containment capability and reducing weight are always great concerns in the design of casings. Ballistic tests can help to mitigate a catastrophic event after a blade out, yet taking time and costing money. A wise way is to hunt for a validated numerical simulation technology, through which the material dynamic behavior over the strain rate range in the ballistic tests should be represented and reasonable failure strain should be defined. The simulation results show that the validation of the numerical simulation technology based on the test data can accurately estimate the absorption energy, describe the physical process and failure mode during the penetration, as well as the failure mechanism. It is found that energy dissipation of projectiles is in manner of compression stage, energy conversion stage, and interactive scrap stage. An effect indicator is proposed, where the factors of critical velocity including impact orientation and mass of projectiles and thickness of casings are considered. The critical velocity presents a linear relation with the effect indicator, which implies the critical velocity obtained by the flat casing could underestimate the capability of the real casing.     

Guidance law with impact time and impact angle constraints

A novel closed-form guidance law with impact time and impact angle constraints is pro- posed for salvo attack of anti-ship missiles, which employs missile’s normal acceleration (not jerk) as the control command directly. Firstly, the impact time control problem is formulated as tracking the designated time-to-go (the difference between the designated impact time and the current flight time) for the actual time-to-go of missile, and the impact angle control problem is formulated as tracking the designated heading angle for the actual heading angle of missile. Secondly, a biased proportional navigation guidance (BPNG) law with designated heading angle constraint is constructed, and the actual time-to-go estimation for this BPNG is derived analytically by solving the system differential equations. Thirdly, by adding a feedback control to this constructed BPNG to eliminate the time-to-go errorthe difference between the standard time-to-go and the actual time-to-go, a guidance law with adjustable coefficients to control the impact time and impact angle simultaneously is developed. Finally, simulation results demonstrate the performance and feasibility of the proposed approach.     

An approach for parameter estimation of combined CPPM and LFM radar signal

In this paper, the problem of parameter estimation of the combined radar signal adopting chaotic pulse position modulation (CPPM) and linear frequency modulation (LFM), which can be widely used in electronic countermeasures, is addressed. An approach is proposed to estimate the initial frequency and chirp rate of the combined signal by exploiting the second-order cyclostationarity of the intra-pulse signal. In addition, under the condition of the equal pulse width, the pulse repetition interval (PRI) of the combined signal is predicted using the low-order Volterra adaptive filter. Simulations demonstrate that the proposed cyclic autocorrelation Hough transform (CHT) algorithm is theoretically tolerant to additive white Gaussian noise. When the value of signal noise to ratio (SNR) is less than 4 dB, it can still estimate the intra-pulse parameters well. When SNR = 3 dB, a good prediction of the PRI sequence can be achieved by the Volterra adaptive filter algorithm, even only 100 training samples.     

Progress on space medicine in 2008—2010

Space Medicine is a special subject to be rising with the development of manned spaceflight. In China, Space Medicine has achieved great development during the past two years. In this paper, the basic research of Space Medicine and its application in China during 2008--2010 were briefly introduced.      

Research on vacuum plume and its effects

In vacuum environment, the exhaust flow of attitude control thrusters would expand freely and produce the plume, which possibly causes undesirable contamination, aerodynamic force and heating effects to the spacecraft. Plume work station (PWS) is developed by Beihang University (BUAA) for numerically simulating the vacuum plume and its effects. An approach which combines the direct simulation Monte Carlo (DSMC) method and difference solution of Navier-Stokes (N-S) equations is applied. The internal flows in nozzles are simulated by solving the NS equations. The flow parameters at nozzle exit are used as the inlet boundary condition for the DSMC calculation. Experimental studies are carried out in a supersonic low density wind tunnel which could simulate the 60-80 km altitude environment to investigate the plume and its effects. To demonstrate the capability of PWS, numerical simulations are performed for the vacuum plume of several typical attitude control thrusters. The research results are of great help for the engineering design.     

INVESTIGATIONS ON LASER SHOCK-PROCESSING (LSP) TO IMPROVE FATIGUE LIFE OF SMALL HOLE IN AIRCRAFT STRUCTURES

SupportedbytheFoundationofAFFDThelasershock-processing(LSP)usesmechanics-effectproducedbyinteractionoflaserwithmattertoimprovesurfacepropertiesofmaterials.Thatistosay,anintensiveshort-pulselaserwithhigh-powerisusedtoshockthesurfaceofmetal,whichmakescoatingtovaporize,expand,ionize,andthentoformdetonationwavesthattravelintothemetals.Underthishighpressureoftheshockwavesitheplasticdeformationisproducedandastrengtheningsur-'facelayerisformed-Therefore,thefatigueresistanceisimproved.In199O,theF…     

NEW APPROACH TO OBTAIN SPACE-TIME CONSERVATION SCHEMES

Inordertoovercometheseverallimitationsofthetraditionalmetheds,anewnumericalmethodofspace-timeconservationelementandsolutionelement(CE/SE)forsolvingconser-vationlawswasdevelopedbyChang['j.Thismethoddifferssubstantiallyinbothconceptandmethedologyfromthewell-establishedmethodslsuchasfinitedifference,finiteelement,etc.,andithasmanynontraditionalfeatures.First,spaceandtimeareunifiedandtreatedonthesamefooting,andbytheintroductionofconservationelementandsolutionelement,bothlocalandglobalfluxconserv…