费用-效果分析在空间运输决策支持系统中的应用

低成本空间运输对保证正常扩大利用空间以及维持所需的地面/空间基地后勤支援是非常重要的.介绍了如何建立空间运输决策支持系统.重点介绍如何在该系统中采用费用-效果分析技术和分析程序.其目的是要提供一种计算机化的决策支持系统,使用户能按费用、进度和技术参数等来组成和评审空间运输系统结构.这种系统和用户有很强的交互作用性,能允许用户针对相同的和在变化中的判据来评审/比较多种空间运输系统方案.     

MX第一级

1980年在 Montery 召开的 JANNAF 会议上,介绍了 MX 第一级原始方案论证及制订的研制方案。这篇新资料评论了最初的两次静态试验所取得的结果。     

Structural and functional changes in man accompanying the weightlessness in "Skylab" flights: a mathematical approach

The present paper reports a kinetic analysis of changes of some physiological parameters, obtained from international literature, after changes in gravitational environment. The overall phenomenology of the adaptation to weightlessness is characterized by a rapid process followed by a slow one. The two processes show half time values differing by about five times. Also in the case of readaptation to gravity, after recovery on the Earth, two well resolved processes, showing different half time values, are observed. It is of interest to notice that the rate of response to weightlessness is lower than that to gravity. Of course, the half time values observed depend on the different physiological parameters considered. In any case, the experimental data suggest a general trend of many adaptive changes, that may all be described by a simple mathematical model.     

Skylab experiment M-092: results of the first manned mission

Blood pressure at 30-sec intervals, heart rate, and percentage increase in leg volume continuously were recorded during a 25-min protocol in the M092 Inflight Lower Body Negative Pressure (LBNP) experiment carried out in the first manned Skylab mission. These data were collected during six tests on each crewman over a 5-month preflight period. The protocol consisted of a 5-min resting control period, 1 min at -8, 1 min at -16, 3 min at -30, 5 min at -40, and 5 min at -50 mm Hg LBNP. A 5-min recovery period followed. Inflight tests were performed at approximately 3-day intervals through the 28-day mission. Individual variations in cardiovascular responses to LBNP during the preflight period continued to be demonstrated in the inflight tests. Measurements of the calf indicated that a large volume of fluid was shifted out of the legs early in the flight and that a slower decrease in leg volume, presumably due to loss of muscle tissue, continued throughout the flight. Resting heart rates tended to be low early in the flight and to increase slightly as the flight progressed. Resting blood pressure varied but usually was characterized by slightly elevated systolic blood pressure, lower diastolic pressure, and higher pulse pressures than during preflight examinations. During LBNP inflight a much greater increase in leg volume occurred than in preflight tests. Large increases occurred even at the smallest levels of negative pressure, suggesting that the veins of the legs were relatively empty at the beginning of the LBNP. The greater volume of blood pooled in the legs was associated with greater increases of heart rate and diastolic pressure and larger falls of systolic and pulse pressure than seen in preflight tests. The LBNP protocol represented a greater stress inflight, and on three occasions it was necessary to stop the test early because of impending syncopal reactions. LBNP responses inflight appeared to predict the degree of postflight orthostatic intolerance. Postflight responses to LBNP during the first 48 hours were characterized by marked elevations of heart rate and instability of blood pressure. In addition, systolic and diastolic pressures were typically elevated considerably both at rest and also during stress. The time required for cardiovascular responses to return to preflight levels was much slower than in the case of Apollo crewmen.     

雷达的韧性、适应性和容量,以及反馈控制的重要性

雷达的作用是向其他系统提供信息,这是不会改变的.现在雷达采用了各种技术,这使雷达比以往任何时候都更经常地采用反馈控制方法来获得韧性、适应性和容量.使雷达对已取得的数据起反应,使反馈控制技术的全部效益发挥出来,只有这样才能设计出更为有价值的雷达来.     

航天飞机纤维缠绕壳体的抗压强度研究:第一部分—试验

航天飞机起飞的瞬间,其主发动机的点火给予固体火箭助推发动机的纤维缠绕壳体一个很大的弯矩,使复合材料壳体的尾部受到了很大的压缩载荷。由于连接的需要,复合壳体尾部具有很复杂的设计,涉及到嵌入的布带和螺旋层减薄问题。为了研究发射瞬间加载状态下的纤维缠绕壳体性能,开始了试验和分析的综合研究。本文将叙述试验计划的研究结果,包括几台全尺寸和300多台缩比壳体的试验。该计划从短期研制工作开始,其目的是要确定适合的缩比试验样品,以便测定材料的抗压强度。一旦缩比样品确定之后,就开始实施更全面的试验计划来确定缠绕壳体的工艺和设计参数变化对强度的影响。为了验证分析预测的有效性,在模拟发射瞬间的弯曲状态中进行了全尺寸壳体试验。在所有的试验中特别注意观察壳体破坏的顺序,即载荷从螺旋层薄弱部位传递到坚固布带终止部位的复杂过程。     

再入制导和弹道跟踪误差分析

新一代可重复使用运载器对再入制导提出了更高地要求。目前的空间运输系统证明基于阻力加速度的制导方法是行之有效的。其基本概念是跟踪基准阻力加速度包线，在飞行过程中可根据需要更新这个包线。跟踪适当的阻力加速度包线保证了飞行器可以飞行准确的距离达到目标，同时满足弹道约束。在横向上，我们可采用类似于美国航天飞机的倾斜反转逻辑或航向角跟踪技术。本文推导出了基于反馈线性化的控制算法，并将其应用于可重复使用运载器纵向和横向的制导。最后，我们分析了阻力加速度跟踪的误差。     

固体火箭发动机的加速度效应

本文研究旋转固体火箭发动机在加速度载菏下的性能变化。根据至今己提出的4种重要模式:力学模式、热力学模式、应力模式、气动力学模式,得出了每种模式的简化模型,并附加了一个内弹道计算机程序。分析结果表明,应力模式对圆孔药柱并不重要。其它模式对固体发动机性能都有影响。分析结果与发动机数据比较表明,侵蚀燃烧效应是旋转速度的函数。     

一种少烟固体火箭发动机的结构使用寿命估计

少烟幼畜(Maverich)固体火箭发动机的结构使用寿命估计是以解剖发动机的推进剂性能数据为基础进行的。为了在两年的时间里模拟五年的使用寿命,这些发动机经历了实验室加速化学和力学老化。用经验老化模型来推测发动机推进剂的性能和药柱横截面上的性能梯度,建立了有限元计算机模型来计算这些性能梯度,并确定发动机安全裕度与时间的函数关系。根据分析,预计这种发动机的使用寿命在10年之上。     

星30/CE和星37FM——改进性能的顶级固体火箭发动机

本文介绍了星30C、30E和37FM三种火箭发动机的设计结构,给出了各种分析结果,并报导了鉴定试验的累积数据。