Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.     

Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

电子工作台在模拟电子技术中的应用

本文简要地介绍了电子工作台的特点和使用方法，结合我们设计具体模拟电子线路的实践，说明了电子工作台在模拟电子技术中的应用。     

FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

高精度伺服系统基于Fuzzy决策的专家变模态控制

本文简要回顾了具有双积分模型的电流驱动直流机电伺服系统的传统设计方法，设计了基于Ｆｕｚｚｙ决策的专家变模态控制器。该控制器积累了伺服系统设计的一些经验，具有一定的“社会智能”，可以在系统运行的不同阶段自发地选用合适的控制律，组合简单的控制方法实现高品质控制。体现了将控制任务分解成子任务分阶段完成的思想。实例仿真及实验结果说明了该方法的有效性     

河北省高校农村生源学生思想现状调查研究

河北省农村人口占总人口的79％，是一个比较典型的农业大省。农村生源大学生，是河北省在校大学生的重要组成部分，占生源的最大比例。大学生是宝贵的人才资源，他们的素质尤其是思想政治素质如何，他们能否成为社会主义事业的合格建设者和可靠接班人，是一个非常重要的问题。因而，科学分析和把握他们的思想政治状况，将会增强我们把握大学生思想脉搏的准确性和说服力。为此笔者选取了河北省八个地市的不同高校，进行了问卷调查、座谈和访谈。对河北省农村生源大学生的思想现状进行了调查。通过统计软件的录入和整理，统计结果比较真实地显示了当前河北省农村生源大学生的思想现状。     

对策论在雷达电子战效能评估中的应用

介绍了对策论的基本内容和分析方法,包括对策论所涉及问题的要素和分类.指出了对策论在雷达电子战效能评估中应用的可行性和必要性.分析了电子对抗博弈双方采取不同对抗技术措施的得益矩阵,并在此得益矩阵的基础上,重点研究了对策论在电子对抗效能评估过程中的应用.