Visualization and PIV study of wing-tip vortices for three different tip configurations

The planform, profile, and cross-sectional views of the wing-tip region of a half-wing model with an aspect ratio of 3.2 and three different wing configurations, namely, square-cut, simple fairing, and Whitcomb?s full winglet wing-tip, were visualized at various angles of attack using smoke-wire visualization technique. Visualization pictures clearly show that the wing-tip vortices at different angles of attack and wing-tip configurations had distinct formation and structure characteristics. A comparison of simple fairing and Whitcomb?s winglet configurations shows that the wing-tip vortices of the Whitcomb?s winglet configuration were reduced in strength and displaced outboard and upward, at least in the near-wake region. This resulted in an increased lift-to-drag ratio for the Whitcomb?s winglet configuration. The changes in the wing-tip vortex characteristics and the improved aerodynamic performance of the winglet were confirmed by Particle Image Velocimetry (PIV) measurements of the cross-flow velocity of the wing-tip trailing regions and the force measurement of the model.     

翼身融合运输机分布式电推进系统设计及油耗评估

针对翼身融合运输机开展了分布式电推进系统的总体设计与油耗评估。通过数值计算完成了70t载质量翼身融合飞机的气动设计与优化。在巡航马赫数为0.80和10km高度的设计点,最大升阻比达到了24。通过求解积分边界层方程组,完成了电推进系统的总体设计。电推进系统包含10个推进风扇,风扇直径为1.45m,压比为1.35,巡航功率为2.94MW。建立了考虑燃烧过程的发动机一维性能模型,对发动机油耗进行了评估,获得了不同发动机循环参数下燃油消耗。建模结果表明,基于翼身融合布局和分布式电推进技术,可使运输机的油耗较C-17节省近50%。      

Control of approach and landing phase for reentry vehicle using fuzzy logic

The reentry vehicle is affected by various disturbances such as a wind gust, atmospheric condition or aerodynamic problems in the approach and landing phase. Therefore it is necessary to design a robust control scheme. This paper presents a control scheme using Mamdani fuzzy PD controller. In this paper, the reference trajectories are generated using geometric parameters for disturbed circumstances with 4 cases: nominal, headwind and tailwind, drag increased case. Then, a Mamdani fuzzy PD controller was designed in this study. Twenty-five rules were applied in the knowledge-based system. The max–min method for a fuzzy inference system and the center-of-mass method in defuzzification were used. Finally, guidance and control simulations are performed for verification of proposed controller using generated reference trajectories. In addition, the Monte Carlo simulation is performed considering various disturbances. The results show that proposed Mamdani fuzzy PD controller has reliability and robustness for control of reentry vehicle with wind disturbance in the approach and landing phases.     

地面模拟微重力条件下Cu-Pb合金的制备及微观结构与摩擦性能研究

利用地面上建立的微重力电磁模拟设备成功制备出了Cu-Pb二元难混合金,并对其微观组织结构与摩擦性能进行了分析与测试。样品SEM分析结果表明,模拟微重力状态下制备的合金样品较好地克服了地面上因重力影响而产生的严重成分偏析,少数弥散相较均匀地分布于基体中,少数相含量越低,弥散体尺寸越小,分布越均匀;摩擦性能测试结果显示合金模拟样品的摩擦性能明显好于基体金属,且摩擦系数随少数相Pb的含量的增大而减小,体积磨损率随少数相含量的增大先快速减小而后又缓慢增大。同时对实验结果进行了简单的分析与讨论。      

加强农民工社会保障建设的对策

改革开放以来,农民工为国家的城市化、工业化、现代化、社会经济的发展与繁荣作出了突出贡献,但是农民工并没有同城市居民一样分享经济发展的成果,农民工社会保障处于缺失状态。随着农民工数量的增多,农民工社会保障缺失问题引起了社会的广泛关注,成了政府、社会亟待解决的问题。文章主要分析了农民工社会保障现状及缺失的原因,并为加强农民工社会保障建设提出了一些政策建议。     

卫星推进剂剩余量测量技术地面试验研究

根据气体注入压力激励测量方法，研制了动态、高精度测量卫星液体推进剂剩余量原理样机，该样机以通信卫星双组元推进系统为测量对象。详细给出了利用该样机进行的地面试验情况，特别是测量数据平滑处理技术和液体蒸汽压误差修正技术。试验结果表明，当推进系统工作状态正常时，剩余液体体积量的测量误差小于贮箱总体积的１．０％，而当推进系统有小泄漏时，则小于２．０％。     

Stable two-sided matching of slot allocation in airport collaborative decision making by top trading cycles mechanism

The problem of capacity shortage in some airports needs to be dealt with sustainable solutions including a more efficient use of the existing runway slots at the airports. The Collaborative Decision Making (CDM) is an important approach applied to Air Traffic Management (ATM) to achieve this efficient use of the slots allocation. Using the Matching approach for two-sided markets of Game theory, the Top Trading Cycle CDM (TTC-CDM) algorithm developed in this research is an extension of the CDM approach aggregating the Ground Delay Program (GDP) of the air sector. The paper compared the developed TTC-CDM model to the existing models such as the conventional Compression algorithm in CDM, the Trade Cycle algorithm and the Deferred Acceptance CDM (DA-CDM) model to evaluate the performance of the proposed model. Through a case study, the results show the effective application of TTC-CDM model to slot allocation in ATM and also presents the advantage of considering the preferences of airport managers beside ATC controllers and airlines in the decision processing.     

Genesis and preservation of a uranium-rich paleozoic epithermal system with a surface expression (Northern Flinders Ranges, South Australia): radiogenic heat driving regional hydrothermal circulation over geological timescales

The surface expressions of hydrothermal systems are prime targets for astrobiological exploration, and fossil systems on Earth provide an analogue to guide this endeavor. The Paleozoic Mt. Gee-Mt. Painter system (MGPS) in the Northern Flinders Ranges of South Australia is exceptionally well preserved and displays both a subsurface quartz sinter (boiling horizon) and remnants of aerial sinter pools that lie in near-original position. The energy source for the MGPS is not related to volcanism but to radiogenic heat produced by U-Th-K-rich host rocks. This radiogenic heat source drove hydrothermal circulation over a long period of time (hundreds of millions of years, from Permian to present), with peaks in hydrothermal activity during periods of uplift and high water supply. This process is reflected by ongoing hot spring activity along a nearby fault. The exceptional preservation of the MGPS resulted from the lack of proximal volcanism, coupled with tectonics driven by an oscillating far-field stress that resulted in episodic basement uplift. Hydrothermal activity caused the remobilization of U and rare earth elements (REE) in host rocks into (sub)economic concentrations. Radiogenic-heat-driven systems are attractive analogues for environments that can sustain life over geological times; the MGPS preserves evidence of episodic fluid flow for the past ～300 million years. During periods of reduced hydrothermal activity (e.g., limited water supply, quiet tectonics), radiolytic H(2) production has the potential to support an ecosystem indefinitely. Remote exploration for deposits similar to those at the MGPS systems can be achieved by combining hyperspectral and gamma-ray spectroscopy.     

基于多层PCB的基板射频信号传输性能研究

随着射频产品的小型化,特别是射频SIP（systems in package）产品的逐渐应用,基于多层PCB的基板射频组件等射频集成产品的应用越来越多,基板内射频信号传输性能的研究也越来越重要。通过对基于多层PCB的基板射频传输性能进行仿真测试,验证了DC-40GHz范围内射频基板传输性能,针对射频传输中极为关注的传输损耗问题,通过改进介质厚度或者铜箔材料实现基板射频传输损耗的优化,单位长度传输线射频传输损耗减小20%以上。同时针对星载等应用环境,通过深层充放电、总剂量试验,表明多层PCB的基板满足星载等航天应用。     

窄条翼导弹俯仰机动中滚转失稳及其控制过程

窄条翼布局导弹通常具有复杂的横向气动特性,在大迎角飞行及快速机动中很容易诱发出现滚转非指令偏离和连续振荡,可能导致飞行失控,影响落点精度。为了研究窄条翼导弹俯仰快速机动对滚转失稳的诱发过程及滚转失稳对俯仰机动控制效果的影响,并验证三通道解耦控制方法的有效性,针对典型俯仰机动过程,分别利用2.4 m跨声速风洞虚拟飞行试验平台和耦合气动/运动/控制的一体化数值计算方法开展了相关研究。结果表明,风洞试验和数值模拟均成功预测了俯仰拉起和保持过程中的滚转自激失稳运动及其引起的纵、横向耦合运动,针对该机动过程,三通道解耦控制方法能够有效抑制滚转运动,保持姿态稳定。