On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

On adaptive spatial-temporal processing for airborne surveillanceradar systems

Implementing the optimum spatial-temporal (angle-Doppler) processor involves two crucial issues: the selection of processing configurations, and the development of adaptive algorithms which can efficiently approach the performance potential of the selected configuration. Among the three available configurations, the joint-domain, the cascade space-time, and the cascade time-space, this work shows that, in contrast to a popular belief, the detection performance potentials of both cascade configurations can fall far below that of the joint-domain optimum. In addition, this work presents a new adaptive algorithm, called the Joint-Domain Localized Generalized Likelihood Ratio detection (JDL-GLR), which is data efficient i.e., with fast convergence to the joint-domain optimum, as well as computationally efficient, together with such desirable features as the embedded constant false-alarm rate (CFAR) and robustness in non-Gaussian interference     

角分集ISAR高分辨成像

对不同视角雷达回波进行融合可以形成大的相干积累角,显著增强雷达空间监控能力。给出一种角分集(制)信号融合成像方法,对于角分集(制)回波方位向存在大的间隔,首先将每一距离单元方位向有效稀疏孔径数据排列组合成一Hankel矩阵,由参数化方法估计一维信号参数,再由估计得到的参数对空缺部分预测填补,对每个距离单元横向补全后,压缩得到二维图像。该方法克服了以往预测方法的不足,能有效用于方位向稀疏孔径预测外推,最终仿真与实际数据处理结果证实结论。     

低地球轨道环境原子氧对航天器表面材料聚酰亚胺作用的数值模拟

在建立数学物理模型的基础上，对氏地球轨道环境和地面实验环境下，有无保护层的聚酰亚胺所受原子氧冲蚀作用进行了进行了成功的数值模拟，获得了具有工程应用价值的数值计算结果，并讨论了数学物理模型中各参数对基蚀曲线形状的影响。从数值模拟结果和美国太空实验结果的比较可以看出，本文数据模拟的结果是正确的。该项工作对航天器的设计具有重要指导意义。     

固体火箭发动机内流场研究的新动向

对固体火箭发动机内流场的研究作了总结性的回顾，并对近年业该研究领域的若干新动向作了介绍，即粒子沉积研究、基于非结构网格技术的内流场数值模拟、复杂内流场模拟试验、     

SB—3热控涂层电导稳定性能评估

SB—3是一种消光性能好,吸收率和发射率高的黑色热控涂层材料,基底材料是有机化合物。为了增加电导能力和克服表面电荷积累的现象,在涂层中又掺有导电添加剂。对这样一种有应用前途的热控涂层进行比较深入细致的观察研究是十分必要的。通过这方面的评估研究可以指出该涂层的充电性能的变化及规律,也有助于涂层改进并实现在型号上可靠应用的最终目的。     

低密度小喷管流场的DSMC直接模拟

用ＤＳＭＣ方法数值模拟了低密度轴对小喷管的流场流动，获得了相应的结果，并将所得结果与用差分求解Ｎ－Ｓ方程方法获得的结果进行了对比，二者吻合较好。     

可溶性改性双马来酰亚胺树脂基体的研究

在双马来酰亚胺/二元胺/改性剂A预聚体系中加入环氧丙烯酸树脂,制备了一种可用作耐热复合材料基体的改性双马来酰亚胺树脂。用DSC研究了该树脂基体的反应特性,并制定出了合适的固化工艺参数:改性树脂基体经140℃/1 h 160℃/1 h 180℃/2 h初固化,于220℃/8 h后固化处理,其热变形温度(HDT)为245℃;该树脂与玻璃纤维制备的单向复合材料层压板的室温拉伸强度、弯曲强度和层间剪切强度分别为1 030 MPa、1 600 MPa和92．1 MPa;180℃下测得弯曲强度保持率为67．8%,层间剪切强度保持率为63．2%,用DMA法测得T_g为273℃。     

空空导弹发动机采用少烟复合固体推进剂评述

本文在总结我国空空导弹发动机研制的基础上,分析空空导弹发动机尾喷流对载机的影响.同时,从导弹发动机设计的角度出发,根据国内实际水平,提出采用少烟复合固体推进剂作为今后减少尾喷流对载机影响的主要技术途径.