The PROCESS experiment: an astrochemistry laboratory for solid and gaseous organic samples in low-earth orbit

The PROCESS (PRebiotic Organic ChEmistry on the Space Station) experiment was part of the EXPOSE-E payload outside the European Columbus module of the International Space Station from February 2008 to August 2009. During this interval, organic samples were exposed to space conditions to simulate their evolution in various astrophysical environments. The samples used represent organic species related to the evolution of organic matter on the small bodies of the Solar System (carbonaceous asteroids and comets), the photolysis of methane in the atmosphere of Titan, and the search for organic matter at the surface of Mars. This paper describes the hardware developed for this experiment as well as the results for the glycine solid-phase samples and the gas-phase samples that were used with regard to the atmosphere of Titan. Lessons learned from this experiment are also presented for future low-Earth orbit astrochemistry investigations.     

Soyuz in French Guiana: A strategic perspective

After a proposition from Russia to France, ESA agreed to see Soyuz rockets take off from French Guiana. From industry, to governments and agencies, many Russian and European actors were involved in this project and they all had different motives. It is therefore relevant to try to discern them so as to understand the rationale behind this cooperative endeavor. Soyuz's primary role is to consolidate Arianespace commercial position in the launching market and to bring activity and founding to a stagnating Russian space sector. With this decision Arianespace will have a full range of commercially available launchers with Soyuz completing the two European rockets Vega and Ariane V. But since Vega and Ariane must have the priority, there is a risk to see an insufficient launch rate for Soyuz, which would not satisfy the Russian partners. Commercial elements alone cannot justify the agreement. There is a larger strategic ambition behind. What is at stake is the future development of innovative launch systems. It is important for ESA to maintain an autonomous access to space and to maintain a dynamic and strong European propulsion industry. Cooperation with Russia can offer an increase of expandable rockets capabilities and can pave for the next generation of launch vehicles. Moreover, we can detect an interest in acquiring a system that has the potential for human space flight capacity. Finally, the decision to launch Soyuz from French Guiana was the conjunction of Russian and French national interests, which led to a complete redefinition of the relations between Europe and Russia. It is of strategic importance that we, Europeans, adapt to this evolution and understand the new place that Russia takes in our space sector.     

Quantitative Assessments of the Martian Hydrosphere

In this paper, we review current estimates of the global water inventory of Mars, potential loss mechanisms, the thermophysical characteristics of the different reservoirs that water may be currently stored in, and assess how the planet’s hydrosphere and cryosphere evolved with time. First, we summarize the water inventory quantified from geological analyses of surface features related to both liquid water erosion, and ice-related landscapes. They indicate that, throughout most of Martian geologic history (and possibly continuing through to the present day), water was present to substantial depths, with a total inventory ranging from several 100 to as much as 1000 m Global Equivalent Layer (GEL). We then review the most recent estimates of water content based on subsurface detection by orbital and landed instruments, including deep penetrating radars such as SHARAD and MARSIS. We show that the total amount of water measured so far is about 30 m GEL, although a far larger amount of water may be stored below the sounding depths of currently operational instruments. Finally, a global picture of the current state of the subsurface water reservoirs and their evolution is discussed.     

An inter-comparison of zenith tropospheric delays derived from DORIS and GPS data

Doppler Orbitography Radiopositioning Integrated by Satellite (DORIS) and Global Positioning System (GPS) techniques are similarly affected by propagation delays in the neutral atmosphere (troposphere) and hence make use of similar data processing strategies for reducing this effect. We compare Zenith Tropospheric Delays (ZTDs) estimated from 52 DORIS and GPS station pairs co-located at 35 sites over the 2005–2008 period. We find an overall systematic negative mean bias of −4 mm and a median bias of −2 mm, with a large site-to-site scatter and especially stronger biases over South America, potentially linked to remaining problems related to the South Atlantic Anomaly (SAA) in the current DORIS data processing. The standard deviation of ZTD differences is in the range 4–12 mm over the globe (8 mm on average), with larger values located in the southern hemisphere. The spatial variability of differences is consistent with previous work but remains largely unexplained. DORIS is shown to be much less sensitive to instrumental changes than GPS (only the switch from Alcatel to Starec antenna at Toulouse is detected as an offset of −4 mm in the ZTD time series). On the opposite, discontinuities and spurious annual signals are found in the GPS ZTD solutions. A discontinuity of +5 mm is found on 5 November 2006, linked to the switch from relative to absolute GPS antenna models used in the data processing. The use of modified GPS antennas (e.g. at GODE) or improved antenna models is shown to reduce the spurious annual signal (e.g. from 5 mm to 2 mm at METS). Overall, the agreement between both techniques is good, though DORIS shows a significantly larger random scatter. The high stability and good spatial and temporal coverage make DORIS a potential candidate technique for meteorology and climate studies as long as reasonable time averaging can be applied (e.g. differences are reduced from 8.6 to 2.4 mm with 5-day averages) and no real-time application is considered. This technique could be considered as a potential contributor to Global Geodetic Observing System (GGOS) for climatology.     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

Internal fuselage noise: comparison of computations and tests on a Falcon airframe

An unequipped Falcon 2000 airframe, a complex heterogeneous structure reduced to the fuselage alone, was subjected to vibro-acoustic characterization within the framework of a cooperative effort by Aerospatiale, Dassault-Aviation, and Onera. Onera's Structural Dynamics and Coupled Systems Department measured the structure's vibro-acoustic responses for four mechanical excitation configurations, and analysed three structural configurations: fuselage alone without floor, with floor, and with floor and internal wall. The resulting database of vibratory and acoustic level measurements is used for validating numerical models in the low- and medium-frequency range, as well as statistical energy analysis (SEA) models in the medium- and high-frequency range.The database was analysed by Dassault-Aviation and Onera. We present here the computation/test comparisons and the limitations of the methods in use. All of the data and comparisons validate the predictive vibro-acoustic response models and methods for a Falcon fuselage subjected to a mechanical excitation.     

Formation of Giant Planets– An Attempt in Matching Observational Constraints

We present models of giant planet formation, taking into account migration and disk viscous evolution. We show that migration can significantly reduce the formation timescale bringing it in good agreement with typical observed disk lifetimes. We then present a model that produces a planet whose current location, core mass and total mass are comparable with the one of Jupiter. For this model, we calculate the enrichments in volatiles and compare them with the one measured by the Galileo probe. We show that our models can reproduce both the measured atmosphere enrichments and the constraints derived by Guillot et al. (2004), if we assume the accretion of planetesimals with ices/rocks ratio equal to 4, and that a substantial amount of CO₂ was present in vapor phase in the solar nebula, in agreement with ISM measurements.