导航卫星中断频次的分析方法

面向导航卫星中断频次的定量分析需求,该文分析导航卫星中断产生的主要原因,给出中断频次分析的流程,并针对分析过程中的三个关键问题,研究提出具体实施方法,包括通过相关性分析快速定位底层中断事件,通过中断树建立指标分析模型,并融合在轨数据、地面试验数据快速预估得到底层功能异常率等。最后通过示例进一步说明中断频次分析过程。该文方法已应用于北斗导航卫星工程。     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

中华世纪坛旋转噪音测试方法的研究

着重阐述了中华世纪坛在实际工作中为解决噪音问题所采用的测试方法，寻求一种解决长时间、多数据测试分析的途径。     

Almost instant time inference for hybrid partially dynamic Bayesian networks

A Bayesian network (BN) is a compact representation for probabilistic models and inference. They have been used successfully for many military and civilian applications. It is well known that, in general, the inference algorithms to compute the exact a posterior probability of a target node given observed evidence are either computationally infeasible for dense networks or impossible for general hybrid networks. In those cases, one either computes the approximate results using stochastic simulation methods or approximates the model using discretization or a Gaussian mixture model before applying an exact inference algorithm. This paper combines the concept of simulation and model approximation to propose an efficient algorithm for those cases. The main contribution here is a unified treatment of arbitrary (nonlinear non-Gaussian) hybrid (discrete and continuous) BN inference having both computation and accuracy scalability. The key idea is to precompile the high-dimensional hybrid distribution using a hypercube representation and apply it for both static and dynamic BN inference. Since the inference process essentially becomes a combination of table look-up and some simple operations, the method is shown to be extremely efficient. It can also he scaled to achieve any desirable accuracy given sufficient preprocessing time and memory for the cases where exact inference is not possible     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

备件配置方法研究

针对电路板件故障数据记录的实际,运用可靠性理论,提出了没有故障数据板件的备件数量计算方法;对有故障统计数据的板件引用了经验模型来确定备件配置。     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

掠海飞行导弹击水概率的仿真研究

本文对掠海导弹的击水概率问题进行了研究,提出了用均匀设计、Monte—Carlo法和逐步回归法建立击水概率预报公式的仿真方法,并结合某型号的反舰导弹进行计算,得到了满意的结果。本文还利用表观频率和表观频谱的概念,建立起飞航导弹的背景干扰——海浪和阵风的数学模型,并用波叠加法进行了数字仿真。     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。