Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Interaction of tryptophan and phenylalanine with metal ferrocyanides and its relevance in chemical evolution

The interaction of two naturally occurring aromatic alpha-amino acids, namely, tryptophan and phenylalanine, with zinc, nickel, cobalt, and copper ferrocyanides has been studied. Both amino acids showed a high adsorption affinity toward metal ferrocyanides at neutral pH (7.0). Adsorption trends followed the Langmuir adsorption isotherm. Values of the Langmuir constants K(L) and X(m) suggest tryptophan is a better adsorbate than phenylalanine. Zinc ferrocyanide showed the highest adsorption, while the minimum adsorption was found in the case of copper ferrocyanide. Infrared spectral studies of adsorbate, adsorbent, and adsorption adducts indicate that adsorption occurs because of the interaction of adsorbate molecules with outer divalent metal ions present in the lattice of metal ferrocyanides. The present investigation supports the hypothesis that metal ferrocyanides might have concentrated the biomonomers on their surface in primeval seas during the course of chemical evolution.     

A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.     

Design and Optimization of 3D Radial Slot Grain Configuration

Upper stage solid rocket motors (SRMS) for launch vehicles require a highly efficient propulsion system. Grain design proves to be vital in terms of minimizing inert mass by adopting a high volumetric efficiency with minimum possible sliver. In this article, a methodology has been presented for designing three-dimensional (3D) grain configuration of radial slot for upper stage solid rocket motors. The design process involves parametric modeling of the geometry in computer aided design (CAD) software through...     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

Experimental investigation of hot and cold side jet interaction with a supersonic cross-flow

This paper reports on experimental aerodynamic investigations on a high-speed missile with side jet control especially with regard to the interaction of cold and hot side jets with supersonic cross-flow. The hot jets were generated with solid propellants. To analyze the effect of the hot jet in relation to side jet control, wall pressure distributions were measured in the area of jet interaction. As a test parameter, the jet pressure ratio was varied and schlieren images were taken to visualize the shocks. In addition, the development of large-scale vortex structures on hot gas jets was detected with high-speed videos. The frame sequences show periodical turbulent jet structures and permit the manual evaluation of their spatial distribution. Analyzing the images, the convection velocities of the large-scale structures and their convection angles were determined. The convection velocities reach the magnitude of cross-flow velocity shortly behind the hot jet exit.     

Automatic detection of geomagnetic sudden commencement via time–frequency clusters

One of global processes in ionosphere–thermosphere–magnetosphere system is the geomagnetic storms. It is of great importance to develop an algorithm that auto-detects sudden commencement because it could be an indicator of onset of the geomagnetic storm. Automatic detection of geomagnetic sudden commencement is based on time–frequency clusters generated by spectrogram. Proposed algorithm is tested on data set collected from stations belong to the international real-time magnetic observatory network (INTERMAGNET). Maximum standard deviation of algorithm detection times is observed to be one minute of the corresponding arrival times published by National Geophysical Data Center (NGDC).     

Investigation of the role of aziridine bonding agents on the aging of the composite solid rocket propellant(CSRP)

The role of bonding agents on the aging characteristics is one of the important research topics.Aging program of the prepared propellant samples was conducting as follows:Five samples,two free of bonding agents,and three containing an aziridine based bonding agents(MAPO,HX-752,MAT4),four samples based on different bonding and curing agents all were aged at 70 ℃.The prepared bonding agent "MAT4" gave remarkable improvements and resulted in highly stable mechanical properties comparing with HX-752 or MAPO.The selected bonding agents family inhibited the rate of decomposition of the propellants during the aging periods and supported the propellant matrix against decomposition at the elevated temperatures.