基于零空间方法的四旋翼无人机避障与协同编队控制

针对四旋翼无人机在编队飞行执行任务时可能遭遇障碍物问题,考虑多无人机避障及机间避撞的需求,提出 1种基于零空间方法的四旋翼无人机避障与协同编队控制算法。首先,建立四旋翼无人机动力学模型,并建立虚拟控制量简化控制模型;其次,基于零空间方法进行避障与协同编队控制算法研究,将无人机任务执行分解为目标趋向任务、避障避撞任务和协同编队任务,并根据优先级进行任务融合得到期望速度;再次,基于 PID方法设计控制律;最后,通过仿真验证所提控制算法的有效性。所提方法可保证四旋翼无人机在编队飞行中遭遇障碍物时的飞行安全。     

考虑UAV性能约束的变速度自主避障算法研究

动态不确定环境下,为有效地提升UAV执行任务的安全性和可靠性,在UAV自主避障过程中考虑了自身的性能约束条件.在速度障碍圆弧法的基础上,考虑UAV的法向和纵向加速度约束范围,研究了速度障碍圆弧随速度矢量变化的规律,提出了一种考虑UAV性能约束的变速度自主避障算法.该算法在考虑自身性能约束条件下,为实现UAV对威胁障碍的避碰提供了更大的避碰裕度.最后,对考虑UAV性能约束的变速度自主避障算法进行了验证,仿真结果证明了算法的有效性和可行性.     

Obstacle avoidance for multi-missile network via distributed coordination algorithm

A distributed coordination algorithm is proposed to enhance the engagement of the multi-missile network in consideration of obstacle avoidance. To achieve a cooperative interception,the guidance law is developed in a simple form that consists of three individual components for target capture, time coordination and obstacle avoidance. The distributed coordination algorithm enables a group of interceptor missiles to reach the target simultaneously, even if some member in the multi-missile network can only collect the information from nearest neighbors. The simulation results show that the guidance strategy provides a feasible tool to implement obstacle avoidance for the multi-missile network with satisfactory accuracy of target capture. The effects of the gain parameters are also discussed to evaluate the proposed approach.     

星际着陆自主障碍检测与规避技术

 为了在具有科学价值的复杂地形区域实现安全着陆,未来的星际着陆器必须具备自主障碍检测与规避的能力。从星际着陆导航传感器技术、自主障碍检测方法和自主障碍规避技术3个方面出发,对星际着陆自主障碍检测与规避技术进行较全面的分析和总结。首先,对适用于星际着陆自主障碍检测的各种主动式和被动式传感器的工作原理、优缺点进行较深入的阐述;接着,基于不同传感器的测量信息,对各种自主障碍检测方法的障碍检测能力、优缺点进行较详细的对比分析;然后,基于多信息融合的自主障碍检测方法,对安全着陆点选择的原则进行阐述;最后,对星际着陆自主障碍规避流程和适用于星际着陆自主障碍规避的制导控制方法进行较系统的总结。     

双轮移动机器人运动目标追踪与避障控制算法

 设计了双回路的双轮移动机器人运动目标追踪与避障控制方案。内层控制回路是运动目标追踪控制律,指导机器人追踪到目标并保持一定的安全距离,控制律考虑了机器人在运动速度上的限制,其渐近稳定性用Lyapunov函数法进行了证明。当遇到障碍物时,外层控制回路根据超声传感器的信息和阻抗控制的概念产生阻抗虚拟力,将期望目标调整到虚拟位置,使机器人能够自动转向以避开障碍物。仿真研究和实验结果证明了追踪算法的有效性和避障方法的可行性。     

基于单目视觉的机器人避障方法研究

避障问题一直是机器人领域研究的热点和重点。设计一种基于单目视觉的避障系统,能够同时检测机器人正前方和两侧的障碍物,且对低纹理障碍物同样具有效果。该系统采用特征尺度检测器完成机器人视野正前方障碍物的检测,对于视野两侧的障碍物运用光流平衡策略进行规避,而对于低纹理的障碍物则利用图像熵的方法进行检测。整个系统在地面移动机器人上进行了测试,实验结果表明,该方法能在复杂的环境下可靠地完成机器人的避障任务。     

A newly bio-inspired path planning algorithm for autonomous obstacle avoidance of UAV

In this paper, a bio-inspired path planning algorithm in 3D space is proposed. The algorithm imitates the basic mechanisms of plant growth, including phototropism, negative geotropism and branching. The algorithm proposed in this paper solves the dynamic obstacle avoidance path planning problem of Unmanned Aerial Vehicle (UAV) in the case of unknown environment maps. Compared with other path planning algorithms, the algorithm has the advantages of fast path planning speed and fewer route points, and can achieve the effect of low delay real-time path planning. The feasibility of the algorithm is verified in the Gazebo simulator based on the Robot Operating System (ROS) platform. Finally, an actual UAV autonomous obstacle avoidance path planning experimental platform is built, and a UAV obstacle avoidance path planning flight test is carried out based on this actual environment.     

基于改进RRT算法的无人机航路规划与跟踪方法研究

为了使航路规划算法在三维动态环境下能够快速规划出较优可行航路,基于快速扩展随机树算法(RRT),对规划航路点进行了无人机飞行动力学约束,并且设计了局部航路动态优化策略。针对传统的航路跟踪控制律跟踪较为曲折的航线时跟踪误差较大的问题,通过将规划算法得出的姿态指令引入姿态控制回路的方式,提高了航路跟踪控制算法的快速性与准确性。在此基础上,搭建了无人机验证平台,利用该验证平台完成了无人机自主避障飞行试验,对算法的有效性进行了验证,并对算法性能进行了评估。     

基于改进人工势场算法的无人机群避障算法研究

针对无人机运动避障人工势场算法本身存在的极小值问题和局部最小值问题，采用改进的人工势场算法，提出了一种新的路径规划方法。不同于目前的人工势场法，该模型从双机相互作用开始，在障碍物斥力的基础上，增加了无人机之间的斥力，同时定义集群的前置形心作为另一个引力源。算法分析表明，该方法能够有效避免无人机陷入局部最小值，并增强了无人机机群的控制和避障能力。基于该无人机控制模型，给出了路径规划设计并进行了仿真实验。实验结果表明，基于该模型的无人机机群控制具有更好的避障性能和追踪目标的能力。     

基于改进RPG方法的MUAVs协同目标跟踪

多无人机(MUAVs)协同Standoff目标跟踪制导律由保持距离的横侧向制导律和保持相对相位角的纵向制导律组成。无人机(UAV)进行Standoff目标跟踪的横侧向制导律采用参考点制导(RPG)方法。针对UAV在基于RPG方法的制导律下存在参考视线与相对速度方向夹角需要保持为锐角、转弯速率在UAV运动方向远离目标情况下太小的不足,提出了改进RPG方法。设计了基于改进RPG方法的MUAVs协同Standoff目标跟踪横侧向制导律和纵向制导律,分析了制导律的稳定性和收敛性,并验证了改进方法的可行性。采用原始RPG方法和改进RPG方法对UAV分别跟踪静止目标和跟踪运动目标进行仿真的结果表明,UAV处于任意初始位置及飞行方向都能快速进入到期望飞行轨迹,应用改进RPG方法可使UAV围绕目标顺时针飞行或者逆时针飞行,验证了改进RPG方法比原始RPG方法的效率更高。     

基于改进A*算法的UUV冰下避障航迹规划算法

针对冰下避障航迹规划问题,提出了一种基于改进A*算法的三维冰下避障航迹规划算法.不同于传统的A*航迹规划算法,该算法结合了人工势场航迹规划算法的思想,将水下地形碰撞约束、海冰碰撞约束以及UUV巡航高度约束重新编排.算法分析表明,该避障航迹规划算法能够有效增强UUV冰下避障能力与定深巡航高度控制能力.基于改进的A*冰下避障航迹规划算法,给出了上述约束的设计方法并进行了仿真验证.仿真结果表明,基于上述约束的航迹规划算法具有良好的避障能力、巡航高度控制能力以及航行距离控制能力.     

基于A*和TEB融合的行人感知无碰跟随方法

移动机器人通过跟随一个指定行人实现导航是一种便捷的方式。针对行人跟随中的机器人跟随和避障问题,提出了一种基于路径规划的无碰跟随方法。该方法结合激光点云分割提供的非行人障碍信息生成静态障碍代价地图,并根据3D行人定位结果,利用基于无迹卡尔曼滤波器（Unscented Kalman Filter,UKF）和最近邻联合概率数据关联（Nearest Near Joint Probabilistic Data Association,NN-JPDA）的多行人跟踪器估计干扰行人运动状态,进而生成动态行人代价地图。在此基础上,基于A^*的全局规划器结合静态障碍代价地图输出指向目标行人的全局路径,而基于时间弹性带（TEB）算法的局部规划器也将动态行人代价地图纳入考虑范围以规划优化的局部路径,这能够帮助机器人实现行人感知的避障且跟随全局路径。通过低频全局规划与高频局部规划结合的方式实现对目标行人安全无碰的跟随。实验验证了所提方法的有效性。     

一种可实现的离散时间最优末制导律

提出了一种可实现的离散时间最优末制导律,该制导律在导弹导引头获取的目标加速度信息的基础上,以时间最优为设计指标,可动态调整最优控制量,能够适应目标末端机动,并采用变周期算法以提高收敛速度。仿真结果表明,该制导律能够满足给定脱靶量要求,成功拦截目标。     

Three-dimensional path planning for unmanned aerial vehicle based on interfered fluid dynamical system

This paper proposes a method for planning the three-dimensional path for low-flying unmanned aerial vehicle(UAV) in complex terrain based on interfered fluid dynamical system(IFDS) and the theory of obstacle avoidance by the flowing stream. With no requirement of solutions to fluid equations under complex boundary conditions, the proposed method is suitable for situations with complex terrain and different shapes of obstacles. Firstly, by transforming the mountains, radar and anti-aircraft fire in complex terrain into cylindrical, conical, spherical, parallelepiped obstacles and their combinations, the 3D low-flying path planning problem is turned into solving streamlines for obstacle avoidance by fluid flow. Secondly, on the basis of a unified mathematical expression of typical obstacle shapes including sphere, cylinder, cone and parallelepiped, the modulation matrix for interfered fluid dynamical system is constructed and 3D streamlines around a single obstacle are obtained. Solutions to streamlines with multiple obstacles are then derived using weighted average of the velocity field. Thirdly, extra control force method and virtual obstacle method are proposed to deal with the stagnation point and the case of obstacles’ overlapping respectively. Finally, taking path length and flight height as sub-goals, genetic algorithm(GA) is used to obtain optimal 3D path under the maneuverability constraints of the UAV. Simulation results show that the environmental modeling is simple and the path is smooth and suitable for UAV. Theoretical proof is also presented to show that the proposed method has no effect on the characteristics of fluid avoiding obstacles.     

基于强化学习的多无人机避碰计算制导方法

针对大量固定翼无人机在有限空域内的协同避碰问题,提出了一种基于多智能体深度强化学习的计算制导方法。首先,将避碰制导过程抽象为序列决策问题,通过马尔可夫博弈理论对其进行数学描述。然后提出了一种基于深度神经网络技术的自主避碰制导决策方法,该网络使用改进的Actor-Critic模型进行训练,设计了实现该方法的机器学习架构,并给出了相关神经网络结构和机间协调机制。最后建立了一个实体数量可变的飞行场景模拟器,在其中进行"集中训练"和"分布执行"。为了验证算法的性能,在高航路密度场景中进行了仿真实验。仿真结果表明,提出的在线计算制导方法能够有效地降低多无人机在飞行过程中的碰撞概率,且对高航路密度场景具有很好的适应性。     

基于梯度下降法的翼伞系统最优分段航迹规划

传统最优控制航迹规划一般以逆风精确着陆、控制能量小为优化目标，但传统最优控制的操纵过程一般是一条连续变化的曲线，工程上不易实施；与之相比，传统分段航迹规划操纵简单，工程上容易实施，能实现逆风精确着陆的目标，但控制能耗大。为了兼顾逆风精确着陆、能耗低和控制操作简单等目标，提出了一种基于梯度下降法的翼伞最优分段航迹规划方法。该方法将控制变量参数化，将逆风精确着陆、控制能耗小、能实现避障等多目标优化问题转化为加权单目标优化问题，并通过梯度下降法求解得到分段常值最优归航航迹。所提算法与基于伪谱法的最优控制规划航迹和基于遗传算法的分段规划航迹进行了对比，算法仿真结果表明本文提出的最优分段航迹规划法既可以实现着陆精度高、控制能量小、逆风着陆和避障的优化目标，同时规划的航迹又由分段常值实现控制，工程上容易实施，兼顾了最优控制航迹规划和分段航迹规划的优点。     

A finite-time 3D guidance law based on fixed-time convergence disturbance observer

In order to achieve accurate interception of high-speed maneuvering targets, this paper presents a relative Line-of-Sight (LOS) velocity based finite-time three-dimensional guidance law design framework, and discusses the application of fixed-time convergence disturbance observer in this framework. Firstly, a simple Lyapunov function is provided to show that the coupled terms in the relative kinematics can be ignored in the proposed guidance law design framework. Secondly, the realizations of several classical guidance laws are analyzed with the proposed framework, including TPN guidance law, finite-time Input-to-State Stability (ISS) guidance law, and sliding mode guidance law. Thirdly, fixed-time convergence disturbance observers are introduced to design the composite finite-time 3D guidance law, and Lyapunov method is employed to show the stability of the guidance system. Numerical simulations with different scenarios show that the proposed generalized guidance law performs high interception accuracy.     

圆弧预测变系数显式拦截中制导

为了满足临近空间机动目标拦截中制导预测和多约束要求,设计了一种基于圆弧预测的变系数显式拦截中制导方法。首先针对临近空间目标滑翔段飞行特性,提出了基于圆弧的几何目标预测方法,将目标机动轨迹近似为圆弧,通过多个间隔时刻的目标位置确定圆弧参数,依据圆弧预测轨迹估计剩余飞行时间,并以当前速度递推预测拦截点状态,进而推导了三维角约束显式制导律。在此基础上,通过在性能指标中构建动压权重函数,以飞行动压近似可用过载变化,设计了变系数显式制导律,实现了制导增益的自适应更新,从而可以使得需用过载在飞行全程中合理分配,满足可用过载约束。最后结合圆弧预测和变系数显式制导,实现了对机动目标的预测拦截。仿真结果表明所提方法具有较好的目标预测精度,而且可以满足终端交会角以及可用过载约束。     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

基于状态改变的机器人路径规划算法

为了解决目前机器人路径规划中时效性低、避障解算量大的问题,借鉴直流电路中理想电感元件两端电压能够从感抗状态恢复到稳定状态的现象,提出了一种利用机器人状态检测量对机器人状态实时检测,从而实现避障的机器人路径规划算法.首先对绕行单个固定障碍物的机器人进行深入分析,然后采用状态叠加的方法,生成任意位置多障碍物同时存在的避障路径.同时对斥力系数进行改进,以确保机器人能够有效到达目标点.为了验证算法在多障碍物环境下的路径规划能力,进行了数值仿真模拟实验.仿真结果表明,使用该算法规划机器人路径时,能够在避免局部极小值点和目标不可达问题的前提下,在较短时间内规划出机器人由起始点到目标点的路径.