月球着陆器软着陆状态跳跃半主动控制

 将磁流变阻尼器应用到月球着陆器着陆机构中,进行减震与缓冲。考虑到着陆初始姿态角的不定和月面斜角的未知,建立起着陆器软着陆动力学模型。基于磁流变液在高速流与长冲程时的阻尼特性,分析了磁流变阻尼器的力学特性。应用安全角面的概念定义安全着陆所要求的着陆初始姿态角与月面斜角之间的关系,建立状态跳跃控制策略,实现软着陆半主动控制。通过与某型被动控制的着陆器进行对比分析,研究了半主动控制。研究结果表明：当允许的最大加速度响应不超过8g时,磁流变半主动状态跳跃控制的安全角面为理想安全角面的0.977 4,是被动控制安全角面的4.2倍,最大加速度变化的相对标准差为被动控制的0.59;而且当着陆初始姿态角以及月面斜角很大时,月球着陆器姿态角变化少,保证月球着陆器平稳着陆。     

仿生四足六旋翼无人机自适应着陆性能分析

旋翼无人机在民用和军用领域被广泛应用,但传统撬式起落架在复杂地形下难以起降,为了扩大旋翼无人机的降落面积和应用范围,设计一种仿人腿式两级缓冲自适应起落架。通过对仿生腿的正逆运动学分析,提出一种自适应起落架姿态调整策略;建立仿生四足六旋翼无人机着陆动力学模型,基于多体动力学软件sim?center 3D 开展了着陆动力学仿真,并与传统撬式起落架进行着陆性能对比研究。结果表明：着陆腿式的两级缓冲自适应起落架及其姿态调整策略,能够使滚转角减小95.69%,过载系数降低34.06%,两级缓冲自适应起落架在面对复杂地形时具备主动调节姿态安全着陆的地形适应能力和极好的减震缓冲能力。     

Deploying process modeling and attitude control of a satellite with a large deployable antenna

Modeling and attitude control methods for a satellite with a large deployable antenna are studied in the present paper. Firstly, for reducing the model dimension, three dynamic models for the deploying process are developed, which are built with the methods of multi-rigid-body dynam- ics, hybrid coordinate and substructure. Then an attitude control method suitable for the deploying process is proposed, which can keep stability under any dynamical parameter variation. Subse- quently, this attitude control is optimized to minimize attitude disturbance during the deploying process. The simulation results show that this attitude control method can keep stability and main- tain proper attitude variation during the deploying process, which indicates that this attitude con- trol method is suitable for practical applications.     

The Juno Mission

The selection of the Discovery Program InSight landing site took over four years from initial identification of possible areas that met engineering constraints, to downselection via targeted data from orbiters (especially Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) and High-Resolution Imaging Science Experiment (HiRISE) images), to selection and certification via sophisticated entry, descent and landing (EDL) simulations. Constraints on elevation (\({\leq}{-}2.5\ \mbox{km}\) for sufficient atmosphere to slow the lander), latitude (initially 15°S–5°N and later 3°N–5°N for solar power and thermal management of the spacecraft), ellipse size (130 km by 27 km from ballistic entry and descent), and a load bearing surface without thick deposits of dust, severely limited acceptable areas to western Elysium Planitia. Within this area, 16 prospective ellipses were identified, which lie ～600 km north of the Mars Science Laboratory (MSL) rover. Mapping of terrains in rapidly acquired CTX images identified especially benign smooth terrain and led to the downselection to four northern ellipses. Acquisition of nearly continuous HiRISE, additional Thermal Emission Imaging System (THEMIS), and High Resolution Stereo Camera (HRSC) images, along with radar data confirmed that ellipse E9 met all landing site constraints: with slopes <15° at 84 m and 2 m length scales for radar tracking and touchdown stability, low rock abundance (<10 %) to avoid impact and spacecraft tip over, instrument deployment constraints, which included identical slope and rock abundance constraints, a radar reflective and load bearing surface, and a fragmented regolith ～5 m thick for full penetration of the heat flow probe. Unlike other Mars landers, science objectives did not directly influence landing site selection.     

轮腿式火星探测机器人的多目标协同控制

火星探测任务要求机器人具有对未知的不规则地形的自适应能力和动态稳定性。针对轮腿式火星探测机器人,提出了基于运动学反解模型、车体姿态和轮壤接触力的多目标协同控制策略。通过车体姿态调整运动学建模、一阶低通滤波及腿部阻抗控制算法和基于腿部运动危险系数的重心高度调整算法,实现了车体姿态的跟踪控制、轮壤恒力接触控制和重心最优高度控制,提升了轮腿机器人在非结构地形中的自适应能力、运动稳定性及腿部运动空间的安全性。在MATLAB和UG中建立联合仿真模型,验证了控制策略的有效性。     

A Pre-Landing Assessment of Regolith Properties at the InSight Landing Site

This article discusses relevant physical properties of the regolith at the Mars InSight landing site as understood prior to landing of the spacecraft. InSight will land in the northern lowland plains of Mars, close to the equator, where the regolith is estimated to be \(\geq3\mbox{--}5~\mbox{m}\) thick. These investigations of physical properties have relied on data collected from Mars orbital measurements, previously collected lander and rover data, results of studies of data and samples from Apollo lunar missions, laboratory measurements on regolith simulants, and theoretical studies. The investigations include changes in properties with depth and temperature. Mechanical properties investigated include density, grain-size distribution, cohesion, and angle of internal friction. Thermophysical properties include thermal inertia, surface emissivity and albedo, thermal conductivity and diffusivity, and specific heat. Regolith elastic properties not only include parameters that control seismic wave velocities in the immediate vicinity of the Insight lander but also coupling of the lander and other potential noise sources to the InSight broadband seismometer. The related properties include Poisson’s ratio, P- and S-wave velocities, Young’s modulus, and seismic attenuation. Finally, mass diffusivity was investigated to estimate gas movements in the regolith driven by atmospheric pressure changes. Physical properties presented here are all to some degree speculative. However, they form a basis for interpretation of the early data to be returned from the InSight mission.     

含局部非线性的月球探测器软着陆动力学模型降阶分析

为准确预估探测器着陆冲击过程的动力学响应,采用非线性有限元方法建立了探测器软着陆动力学模型,能够较全面地反映出各种非线性因素。针对非线性有限元求解耗时长的弱点,考虑到探测器的局部非线性特性,利用广义动力缩聚（GDR）方法建立了月球探测器中心体的降阶模型。提出了一种基于脉冲响应函数的模态截断准则,在广义动力缩聚方法的基础上筛选少数几阶模态影响系数（MIC）较高的模态表征中心体的加速度响应,能够进一步降低模型的阶数。将降阶的中心体模型与含非线性的缓冲机构连接后进行的软着陆动力学分析能够准确而快速地预估探测器测点的加速度响应,与非降阶模型对比,计算时间缩短了75.5%,加速度响应的相对峰值误差控制在5%以内。数值仿真表明,广义动力缩聚方法能够有效地解决传统非线性有限元方法求解效率低的问题,本文所提模态截断准则的优点是适于求解模态密集问题并且与系统的输入输出无关。     

火星进入减速器技术综述与展望

随着火星着陆探测任务的不断推进,火星采样返回、载人登陆火星和火星基地等任务要求能将更大、更重的探测器着陆到火星表面,这就需要在火星大气进入阶段进行高效减速。基于以往成功的火星着陆探测任务,首先系统地回顾了火星进入段气动减速技术的发展历史;然后,结合火星进入过程的特点阐述了火星进入段减速设计的必要性及其面临的挑战;接着,系统地总结了充气式气动减速器、可展开式气动减速器和超声速反推减速器的系统构成和研究进展;最后,对这3种减速器技术的未来发展方向和亟待解决的关键问题进行了比较全面的分析和展望。     

Evaluating the Wind-Induced Mechanical Noise on the InSight Seismometers

The SEIS (Seismic Experiment for Interior Structures) instrument onboard the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. Here we analyse in-situ wind measurements from previous Mars space missions to understand the wind environment that we are likely to encounter on Mars, and then we use an elastic ground deformation model to evaluate the mechanical noise contributions on the SEIS instrument due to the interaction between the Martian winds and the InSight lander. Lander mechanical noise maps that will be used to select the best deployment site for SEIS once the InSight lander arrives on Mars are also presented. We find the lander mechanical noise may be a detectable signal on the InSight seismometers. However, for the baseline SEIS deployment position, the noise is expected to be below the total noise requirement \(>97~\%\) of the time and is, therefore, not expected to endanger the InSight mission objectives.     

弹体自旋条件下姿控发动机控制律设计

针对大气层内带有横向喷流姿控发动机和尾部气动舵的导弹,研究了弹体自旋条件下的姿态控制问题。以导弹的横向加速度为输出,建立了姿态系统数学模型,并对模型进行了分析和简化。考虑了双通道控制和单通道矢量控制两种控制方式,针对姿控发动机的离散工作特点,分别研究了控制律设计问题,实现了横向加速度的快速跟踪。针对喷流干扰效应,给出了喷流放大因子的在线估计算法。最后,进行了数值仿真,仿真结果说明了所提方法的有效性。     

Analysis of Local Slopes at the InSight Landing Site on Mars

To evaluate the topography of the surface within the InSight candidate landing ellipses, we generated Digital Terrain Models (DTMs) at lander scales and those appropriate for entry, descent, and landing simulations, along with orthoimages of both images in each stereopair, and adirectional slope images. These products were used to assess the distribution of slopes for each candidate ellipse and terrain type in the landing site region, paying particular attention to how these slopes impact InSight landing and engineering safety, and results are reported here. Overall, this region has extremely low slopes at 1-meter baseline scales and meets the safety constraints of the InSight lander. The majority of the landing ellipse has a mean slope at 1-meter baselines of 3.2°. In addition, a mosaic of HRSC, CTX, and HiRISE DTMs within the final landing ellipse (ellipse 9) was generated to support entry, descent, and landing simulations and evaluations. Several methods were tested to generate this mosaic and the NASA Ames Stereo Pipeline program dem_mosaic produced the best results. For the HRSC-CTX-HiRISE DTM mosaic, more than 99 % of the mosaic has slopes less than 15°, and the introduction of artificially high slopes along image seams was minimized.     

基于直接升力与动态逆的舰尾流抑制方法

在复杂的作战和着舰环境下,舰尾气流扰动是着舰误差的最主要来源之一。如果在着舰下滑阶段利用直接升力控制（DLC）的快速性和解耦性能力,可以极大地减轻飞行员着舰操纵负担并且提高着舰最后阶段对舰尾流的抑制能力。从航迹调节和姿态稳定的解耦角度出发,提出在非线性动态逆（NDI）控制框架下实现基于直接升力的着舰控制律方法,并通过建立含有舰尾流扰动的E-2C全量飞机仿真模型进行验证。结果表明：在非线性动态逆控制中引入直接升力的舰载机着舰控制律,可以实现在着舰下滑阶段姿态稳定的同时,通过直接升力快速解耦调节航迹误差,并且在引入舰尾流干扰的情况下,具有快速修正下滑倾角误差、抑制舰尾流干扰的能力,最终达到显著提高着舰精度的效果。     

仿真技术在飞机起落架可靠性分析中的应用研究

起落架所承受的动载荷较大,造成系统工作环境复杂,出现故障较多,因此对起落架系统可靠性的研究显得迫切和重要。以三维辅助建模软件CATIA、有限元分析软件NASTRAN、多体动力学分析软件LMS Virtual．Lab和液压控制仿真软件AMESim等为工具,采用自动仿真求解策略针对某起落架典型失效模式进行仿真分析,得到仿真...     

月球探测器加速度响应预测的时域子结构方法

航天器结构的日益复杂和庞大为全系统级的动力学仿真带来了更大的困难和挑战,目前主要采用动态子结构法来提高分析求解效率,并解决不同设计部门之间的模型共享和技术保护问题。月球探测器软着陆阶段的冲击力学环境一般由加速度冲击响应谱描述,由于高阶振型对结构加速度响应的影响要比对位移响应的影响大得多,所以在小阻尼情况下,经典的基于模态的子结构方法在相同截断频率下对加速度响应的预测精度远低于位移响应。为解决这一问题,引进基于脉冲响应函数的时域子结构(IBS)方法,提出了一种适用于预测加速度响应的降阶形式的迭代求解格式。利用探测器着陆数值模拟试验中测得的缓冲机构作用力作为激励,分别采用固定界面模态综合(CB)法和IBS方法分析了月球探测器的加速度响应。数值算例表明,后者在计算精度和求解效率方面均高于前者,并说明基于脉冲响应函数的子结构方法适于对月球探测器加速度响应进行高精度快速预测。     

直升机腿式起落架机构动力学研究

多用途、智能化和强地形适应性是未来直升机发展的重要趋势。起落架是保障直升机起降安全的关键部件,由于传统起落架地形适应能力较差,针对直升机在复杂地形环境下如何实现平稳着陆的难题,利用仿生学设计理念设计一种腿式起落架系统。首先从腿式起落架设计需求出发,对起落架构型进行分析并完成腿部结构设计;然后基于设计的腿部机构,完成其运动学分析和动力学分析,建立相应模型,以此作为腿式起落架运动控制的基础。最后在实验室完成腿式起落架的运动测试,证明了结构设计的合理性和控制算法的准确性。     

Dynamics Model of Carrier-based Aircraft Landing Gears Landed on Dynamic Deck

In order to study the carrier-based aircraft landing laws landed on the carrier, the dynamics model of carrier-based aircraft landing gears landed on dynamic deck is built. In this model, the interactions of the carrier-based aircraft landing attitude and the damping force acting on landing gears are considered, and the influence of dynamic deck is introduced into the model through the deck normal vectors. The wheel-deck coordinate system is put forward to solve the complex simulation problem of force-on-wheel which comes from the dynamic deck. At last, by simulation, it is demonstrated that the model can be applied to landing attitude when the carrier-based aircraft is landing on the dynamic deck, it is also proved that the model is comprehensive and suitable for any abnormal landing situation.     

扰动环境下火星精确着陆自主轨迹规划方法

针对扰动环境下火星精确着陆动力下降段自主轨迹规划问题,在终端时间自由条件下,研究了基于序列凸优化方法的自主轨迹规划方法。首先,在终端自由情况下,建立初始状态无扰动轨迹预规划问题。其次,结合鲁棒Tube-MPC思想,针对线性反馈控制律,建立扰动环境下着陆轨迹重规划问题,分析重规划问题的可行性,给出了预规划问题可行的必要性条件,为控制参数的选取提供参考,提出扰动环境下火星精确着陆自主轨迹规划框架。然后,针对终端自由问题,将飞行时域映射到单位时间,建立序列凸优化子问题,对子问题进行线性近似,使用序列凸优化方法进行求解并分析了收敛解的最优性。最后,进行数值仿真,验证扰动环境下火星精确着陆自主轨迹规划方法的有效性。     

Thruster design for position/attitude control of spacecraft

The objective of this work is to design the configuration of thrusters and valves of a propulsion system which should reject external and internal perturbations to control position and attitude of a spacecraft. As has been proved in a previous paper by Pena et al. (see ibid., vol. 36, no. 3, 2000), there exist configurations of 6 thrusters which can achieve this task, even under the failure of any one of them. Nevertheless, that previous result only presents analysis conditions and furthermore its implementation would demand also 6 valves, one for each thruster. Here we propose a design method that can solve the aforementioned problem with 6 thrusters/3 valves.     

喷嘴为执行机构的空间飞行器基于误差四元数的非线性姿态跟踪控制

研究带喷嘴空间飞行器在姿态跟踪机动时的多轴耦合非线性姿态控制问题。姿态运动学和动力学用误差四元数描述。通过线性变换将误差四元数动力学方程转换成 4个摄动双积分系统 ,并基于此摄动双积分系统设计了开关控制器。由误差四元数及其导数构成的抛物型开关函数决定了控制器中的逻辑。文章考虑了最短的姿态捕获路径、外部干扰抑制、和不确定参数补偿问题。控制器允许力矩矩阵为非对称 ,从而使喷气执行机构的安装有更好的灵活性。由于不需要目标的加速度反馈 ,控制器可用于对机动目标的跟踪。用相平面方法分析了闭环系统的鲁棒稳定性。仿真结果验证了控制方案的可行性