The MESSENGER Science Operations Center

The MESSENGER Science Operations Center (SOC) is an integrated set of subsystems and personnel whose purpose is to obtain, provide, and preserve the scientific measurements and analysis that fulfill the objectives of the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission. The SOC has two main functional areas. The first is to facilitate science instrument planning and operational activities, including related spacecraft guidance and control operations, and to work closely with the Mission Operations Center to implement those plans. The second functional area, data management and analysis, involves the receipt of science-related telemetry, reformatting and cataloging this telemetry and related ancillary information, retaining the science data for use by the MESSENGER Science Team, and preparing data archives for delivery to the Planetary Data System; and the provision of operational assistance to the instrument and science teams in executing their algorithms and generating higher-level data products.     

The IMAGE science and mission operations center

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) will produce forefront science by quantifying the response of the magnetosphere to the time variable solar wind. It will acquire, for the first time, a variety of three-dimensional images of magnetospheric boundaries and plasma distributions extending from the magnetopause to the inner plasmasphere. The images will be produced on time scales needed to answer important questions about the interactions of the solar wind and the magnetosphere. The IMAGE team will provide open access to all IMAGE data. Thus there will be no proprietary rights or periods. All IMAGE data products will be archived and available to the scientific research community. The IMAGE mission will operate with a near 100% duty cycle with all instruments in their baseline operational modes. A Science and Mission Operations Control Center or SMOC has been developed at the NASA Goddard Space Flight Center (GSFC) to be the main data and command processing system for IMAGE. The IMAGE Level-0 data will be processed into Level 0.5 and Level-1 data and browse products within 24 hours after their receipt of raw data in the SMOC. These data products will be transferred to the NSSDC, for long-term archiving, and posted immediately on the world-wide-web for use by the international scientific community and the public.     

Lunar Reconnaissance Orbiter (LRO): Observations for Lunar Exploration and Science

The Lunar Reconnaissance Orbiter (LRO) was implemented to facilitate scientific and engineering-driven mapping of the lunar surface at new spatial scales and with new remote sensing methods, identify safe landing sites, search for in situ resources, and measure the space radiation environment. After its successful launch on June 18, 2009, the LRO spacecraft and instruments were activated and calibrated in an eccentric polar lunar orbit until September 15, when LRO was moved to a circular polar orbit with a mean altitude of 50 km. LRO will operate for at least one year to support the goals of NASA’s Exploration Systems Mission Directorate (ESMD), and for at least two years of extended operations for additional lunar science measurements supported by NASA’s Science Mission Directorate (SMD). LRO carries six instruments with associated science and exploration investigations, and a telecommunications/radar technology demonstration. The LRO instruments are: Cosmic Ray Telescope for the Effects of Radiation (CRaTER), Diviner Lunar Radiometer Experiment (DLRE), Lyman-Alpha Mapping Project (LAMP), Lunar Exploration Neutron Detector (LEND), Lunar Orbiter Laser Altimeter (LOLA), and Lunar Reconnaissance Orbiter Camera (LROC). The technology demonstration is a compact, dual-frequency, hybrid polarity synthetic aperture radar instrument (Mini-RF). LRO observations also support the Lunar Crater Observation and Sensing Satellite (LCROSS), the lunar impact mission that was co-manifested with LRO on the Atlas V (401) launch vehicle. This paper describes the LRO objectives and measurements that support exploration of the Moon and that address the science objectives outlined by the National Academy of Science’s report on the Scientific Context for Exploration of the Moon (SCEM). We also describe data accessibility by the science and exploration community.     

Dawn Science Planning, Operations and Archiving

The Dawn science operations team has designed the Vesta mission within the constraints of a low-cost Discovery mission, and will apply the same methodology to the Ceres mission. The design employs proactive mapping mission strategies and tactics such as functional redundancy, adaptability to trajectory uncertainties, and easy sequence updates to deliver reliable and robust sequences. Planning tools include the Science Opportunity Analyzer and other multi-mission tools, and the Science time-ordered listings. Science operations are conducted jointly by the Science Operations Support Team at the Jet Propulsion Laboratory (JPL) and the Dawn Science Center at the University of California, Los Angeles (UCLA). The UCLA Dawn Science Center has primary responsibility for data archiving while the JPL team has primary responsibility for spacecraft and instrument operations. Constraints and uncertainties in the planning and sequencing environment are described, and then details of the science plan are presented for each mission sub-phase. The plans indicate that Dawn has a high probability of meeting its science objectives and requirements within the imposed constraints.     

STEREO Ground Segment, Science Operations, and Data Archive

Vitally important to the success of any mission is the ground support system used for commanding the spacecraft, receiving the telemetry, and processing the results. We describe the ground system used for the STEREO mission, consisting of the Mission Operations Center, the individual Payload Operations Centers for each instrument, and the STEREO Science Center, together with mission support from the Flight Dynamics Facility, Deep Space Mission System, and the Space Environment Center. The mission planning process is described, as is the data flow from spacecraft telemetry to processed science data to long-term archive. We describe the online resources that researchers will be able to use to access STEREO planning resources, science data, and analysis software. The STEREO Joint Observations Program system is described, with instructions on how observers can participate. Finally, we describe the near-real-time processing of the “space weather beacon” telemetry, which is a low telemetry rate quicklook product available close to 24 hours a day, with the intended use of space weather forecasting.     

SOHO operations and ground system

SOHO is a joint ESA/NASA mission to study the sun from its interior to, and including, the solar wind in interplanetary space. It is currently scheduled for launch in 1995. After launch SOHO with be operated from the Experiment Operations Facility (EOF) at Goddard Space Flight Center (GSFC). The EOF will consist of facilities for instrument commanding, data reception, data reduction and data analysis. In this paper the operations concepts including instrument ground commanding from the EOF and communications capabilities between the EOF and ground observatories and the public networks in general will be described.     

ISTP science data systems and products

The International Solar-Terrestrial Physics (ISTP) program will provide simultaneous coordinated scientific measurements from most of the major areas of geospace including specific locations on the Earth's surface. This paper describes the comprehensive ISTP ground science data handling system which has been developed to promote optimal mission planning and efficient data processing, analysis and distribution. The essential components of this ground system are the ISTP Central Data Handling Facility (CDHF), the Information Processing Division's Data Distribution Facility (DDF), the ISTP/Global Geospace Science (GGS) Science Planning and Operations Facility (SPOF) and the NASA Data Archive and Distribution Service (NDADS).The ISTP CDHF is the one place in the program where measurements from this wide variety of geospace and ground-based instrumentation and theoretical studies are brought together. Subsequently, these data will be distributed, along with ancillary data, in a unified fashion to the ISTP Principal Investigator (PI) and Co-Investigator (CoI) teams for analysis on their local systems. The CDHF ingests the telemetry streams, orbit, attitude, and command history from the GEOTAIL, WIND, POLAR, SOHO, and IMP-8 Spacecraft; computes summary data sets, called Key Parameters (KPs), for each scientific instrument; ingests pre-computed KPs from other spacecraft and ground basel investigations; provides a computational platform for parameterized modeling; and provides a number of data services for the ISTP community of investigators. The DDF organizes the KPs, decommutated telemetry, and associated ancillary data into products for duistribution to the ISTP community on CD-ROMs. The SPOF is the component of the GGS program responsible for the development and coordination of ISTP science planning operations. The SPOF operates under the direction of the ISTP Project Scientist and is responsible for the development and coordination of the science plan for ISTP spacecraft. Instrument command requests for the WIND and POLAR investigations are submitted by the PIs to the SPOF where they are checked for science conflicts, forwarded to the GSFC Command Management Syntem/Payload Operations Control Center (CMS/POCC) for engineering conflict validation, and finally incorporated into the conflict-free science operations plan. Conflict resolution is accomplished through iteration between the PIs, SPOF and CMS and in consultation with the Project Scientist when necessary. The long term archival of ISTP KP and level-zero data will be undertaken by NASA's National Space Science Data Center using the NASA Data Archive and Distribution Service (NDADS). This on-line archive facility will provide rapid access to archived KPs and event data and includes security features to restrict access to the data during the time they are proprietary.     

James Webb Space Telescope: Project Overview

The James Webb Space Telescope (JWST) project at the NASA, Goddard Space Flight Center (GSFC) is responsible for the development, launch, flight, and science operations for the telescope. The project is in phase B with its launch scheduled for no earlier than June 2013. The project is a partnership among NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). The JWST mission team is fully in place, including major ESA and CSA subcontractors. This provides an overview of the planned JWST science, current architecture focusing on the instrumentation, and mission status, including technology developments, and risks.     

First spaceborne demonstration of BeiDou-3 signals for GNSS reflectometry from CYGNSS constellation

The full constellation of Chinese Global Navigation Satellite System (GNSS) BeiDou-3 has been deployed completely and started fully operational service. In addition to providing global Positioning, Navigation and Timing (PNT) services, the BeiDou-3 satellites transmissions can also be used as the sources of illumination for Earth Observation (EO) with a bistatic radar configuration. This innovative EO concept, known as GNSS reflectometry (GNSS-R), allows to measure the Earth surface characteristics at high resolution via the reflected L-band radar signals collected by a constellation of small, low cost and low Earth orbiting satellites. For the first time in orbit, earth reflected BeiDou-3 signal has been detected from the limited sets of raw data collected by the NASA’s Cyclone GNSS (CYGNSS) constellation. The feasibility of spaceborne BeiDou-3 reflections on two typical applications, including sea surface wind and flooding inundation detection, has been demonstrated. The methodology and results give new strength to the prospect of new spaceborne GNSS-R instruments and missions, which can make multi-GNSS reflectometry observations available to better capture rapidly changing weather systems at better spatio-temporal scales.     

Instrument Boom Mechanisms on the THEMIS Satellites; Magnetometer, Radial Wire, and Axial Booms

The five “Time History of Events and Macroscale Interactions during Substorms” (THEMIS) micro-satellites launched on a common carrier by a Delta II, 7925 heavy, on February 17, 2007. This is the fifth launch in the NASA MeDIum class EXplorer (MIDEX) program. In the mission proposal the decision was made to have the University of California Berkeley Space Sciences Laboratory (UCB-SSL) mechanical engineering staff provide all of the spacecraft appendages, in order to meet the short development schedule, and to insure compatibility. This paper describes the systems engineering, design, development, testing, and on-orbit deployment of these boom systems that include: the 1 and 2 meter carbon fiber composite magnetometer booms, the 40 and 50 m tip to tip orthogonal spin-plane wire boom pairs, and the 6.3 m dipole stiff axial booms.     

CLUSTER MISSION OPERATIONS

The Cluster ground segment design and mission operations concept have been defined according to the basic mission requirements, namely, to allow the transfer of the four spacecraft from the initial geostationary transfer orbit achieved at separation from the launcher into the final highly elliptical polar orbits, such that in the areas of scientific interest along their orbits, the four spacecraft will form a tetrahedral configuration with pre-defined separation distances, to be changed every six months during the mission. The Cluster mission operations will be carried out by ESA from its European Space Operations Centre; the task of merging the Principal Investigators' requests into coordinated, regular scientific mission planning inputs to ESOC will be undertaken by the Joint Science Operations Centre. The mission products will be distributed to the scientific community regularly in form of CD-ROMs. Principal Investigators will also have access to quick-look science, housekeeping telemetry and auxiliary data via an electronic network.     

Orbit Design for the THEMIS Mission

THEMIS, NASA’s fifth Medium Class Explorer (MIDEX) mission will monitor the onset and macro-scale evolution of magnetospheric substorms. It is a fleet of 5 small satellites (probes) measuring in situ the magnetospheric particles and fields while a network of 20 ground based observatories (GBOs) monitor auroral brightening over Northern America. Three inner probes (～1 day period, 10 R_E apogee) monitor current disruption and two outer probes (～2 day and ～4 day period, 20 R_E and 30 R_E apogees respectively) monitor lobe flux dissipation. In order to time and localize substorm onsets, THEMIS utilizes Sun–Earth aligned conjunctions between the probes when the ground-based observatories are on the nightside. To maintain high recurrence of conjunctions the outer orbits have to be actively adjusted during each observation season. Orbit maintenance is required to rearrange the inner probes for dayside observations and also inject the probes into their science orbits after near-simultaneous release from a common launch vehicle. We present an overview of the orbit strategy, which is primarily driven by the scientific goals of the mission but also represents a compromise between the probe thermal constraints and fuel capabilities. We outline the process of orbit design, describe the mission profile and explain how mission requirements are targeted and evaluated. Mission-specific tools, based on high-fidelity orbit prediction and common magnetospheric models, are also presented. The planning results have been verified by in-flight data from launch through the end of the first primary science seasons and have been used for mission adjustments subject to the early scientific results from the coast phase and first tail season.     

Optimised radiative cooling of infrared space telescopes and applications to possible missions

General principles are outlined for the design of space infrared telescopes intended to cool by radiation to the lowest temperatures attainable without the use of on-board cryogens, and assuming on-orbit cooling after a warm launch. Maximum protection from solar and earth heating, maximum radiating area and efficiency and minimum absorbing area and absorptivity are the obvious basic criteria. The optimised design is a short, fat telescope surrounded by a series of radiation shields, each cooled by its own radiator. Maximising the longitudinal conductivity of the radiation shields and of the telescope tube itself is important both to the on-orbit cooling time and the final achieveable temperature. Realistic designs take between 80 and 200 days to cool to within a few degrees of equilibrium temperatures, depending on the materials used. Great advantages accrue from the use of an orbit distant from earth. Both simple models and detailed simulations suggest that temperatures of 30 to 40 K are attainable in high earth orbits. Placing a radiatively cooled telescope in a halo orbit around the Lagrangian point L2 is a particularly attractive option and significantly lower temperatures can be achieved there than in Earth orbit. Optimised radiative cooling is an important element of the small Japanese mission SMIRT. We suggest that a combination of an ESA Medium-sized Mission with a NASA Explorer to send a 2m+ telescope to an L2 halo orbit would provide a cost-effective and powerful long-duration facility for the early 21st century.     

The STEREO Observatory

The Solar Terrestrial Relations Observatory (STEREO) is the third mission in NASA’s Solar Terrestrial Probes program. The mission is managed by the Goddard Space Flight Center (GSFC) and implemented by The Johns Hopkins University Applied Physics Laboratory (JHU/APL). This two-year mission provides a unique and revolutionary view of the Sun–Earth system. Consisting of two nearly identical observatories, one ahead of Earth in its orbit around the Sun and the other trailing behind the Earth, the spacecraft trace the flow of energy and matter from the Sun to Earth and reveal the three-dimensional structure of coronal mass ejections (CMEs) to help explain their genesis and propagation. From its unique side-viewing vantage point, STEREO also provides alerts for Earth-directed solar ejections. These alerts are broadcast at all times and received either by NASA’s Deep Space Network (DSN) or by various space-weather partners.     

The ACE Science Center

The Advanced Composition Explorer (ACE) mission is supported by the ACE Science Center for the purposes of processing and distributing ACE data, and facilitating collaborative work on the data by instrument investigators and by the space physics community at large. The Science Center will strive to ensure that the data are properly archived and easily available. In particular, it is intended that use of a centralized science facility will guarantee appropriate use of data formatting standards, thus easing access to the data, will improve communications within and to the ACE science working team, and will reduce redundant effort in data processing. Secondary functions performed by the Science Center include acting as an interface between the scientists and the mission operations team. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.     

The THEMIS Constellation

The Time History of Events and Macroscale Interactions during Substorms (THEMIS) mission is the fifth NASA Medium-class Explorer (MIDEX), launched on February 17, 2007 to determine the trigger and large-scale evolution of substorms. The mission employs five identical micro-probes (termed “probes”), which have orbit periods of one, two and four days. Each of the Probes carries five instruments to measure electric and magnetic fields as well as ions and electrons. Each probe weighs 134 kg including 49 kg of hydrazine fuel and measures approximately 0.8×0.8×1.0 meters (L×W×H) and operates on an average power budget of 40 watts. For launch, the Probes were integrated to a Probe Carrier and separated via a launch vehicle provided pyrotechnic signal. Attitude data are obtained from a sun sensor, inertial reference unit and the instrument Fluxgate Magnetometer. Orbit and attitude control use a RCS system having two radial and two axial thrusters for roll and thrust maneuvers. Its two fuel tanks and pressurant system yield 960 meters/sec of delta-V, sufficient to allow Probe replacement strategies. Command and telemetry communications use an S-band 5 watt transponder through a cylindrical omni antenna with a toroidal gain pattern. This paper provides the key requirements of the probe, an overview of the probe design and how they were integrated and tested. It includes considerations and lessons learned from the experience of building NASA’s largest constellation.