共查询到20条相似文献,搜索用时 718 毫秒
1.
J.P. Sanchez C.R. McInnes 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2012
The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15–170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object. 相似文献
2.
小行星探测有助于研究太阳系演化等重要科学问题,在深空探测任务转移途中实施小行星顺访探测可增加科学研究回报。直接通过轨道递推筛选小行星探测目标计算量大、效率低,针对该问题提出了基于最小轨道交叉距离的目标预筛选方法。在推导出适用于计算双曲线轨道的最小轨道交叉距离公式后,将此理论应用到小行星顺访探测目标筛选中。首先基于探测器与小行星轨道的形状、空间位置计算二者轨道在空间中的几何最近距离,预筛选出可能满足接近距离标准的小行星目标;然后基于轨道递推模型,筛选出真实最近距离小于可接近标准的目标小行星。仿真结果显示,基于最小轨道交叉距离的预筛选方法可有效减少计算量,降低计算时间,提高小行星顺访目标筛选的效率。 相似文献
3.
P. Pergola 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2013
This paper presents an innovative space mission devoted to the survey of the small Earth companion asteroid by means of nano platforms. Also known as the second Earth moon, Cruithne, is the target identified for the mission. Both the trajectory to reach the target and a preliminary spacecraft budget are here detailed. The idea is to exploit high efficient ion thrusters to reduce the propellant mass fraction in such a high total impulse mission (of the order of 1e6 Ns). This approach allows for a 100 kg class spacecraft with a very small Earth escape energy (5 km2/s2) to reach the destination in about 320 days. The 31% propellant mass fraction allows for a payload mass fraction of the order of 8% and this is sufficient to embark on such a small spacecraft a couple of nano-satellites deployed once at the target to carry out a complete survey of the asteroid. Two 2U Cubesats are here considered as representative payload, but also other scientific payloads or different platforms might be considered according with the specific mission needs. The small spacecraft used to transfer these to the target guarantees the manoeuvre capabilities during the interplanetary journey, the protection against radiations along the path and the telecommunication relay functions for the data transmission with Earth stations. The approach outlined in the paper offers reliable solutions to the main issues associated with a deep space nano-satellite mission thus allowing the exploitation of distant targets by means of these tiny spacecraft. The study presents an innovative general strategy for the NEO observation and Cruithne is chosen as test bench. This target, however, mainly for its relevant inclination, requires a relatively large propellant mass fraction that can be reduced if low inclination asteroids are of interest. This might increase the payload mass fraction (e.g. additional Cubesats and/or additional scientific payloads on the main bus) for the same 100 kg class mission. 相似文献
4.
Massimiliano Vasile Christie Alisa Maddock 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2012
This paper presents the design of a multi-spacecraft system for the deflection of asteroids. Each spacecraft is equipped with a fibre laser and a solar concentrator. The laser induces the sublimation of a portion of the surface of the asteroid, and the resultant jet of gas and debris thrusts the asteroid off its natural course. The main idea is to have a formation of spacecraft flying in the proximity of the asteroid with all the spacecraft beaming to the same location to achieve the required deflection thrust. The paper presents the design of the formation orbits and the multi-objective optimisation of the formation in order to minimise the total mass in space and maximise the deflection of the asteroid. The paper demonstrates how significant deflections can be obtained with relatively small sized, easy-to-control spacecraft. 相似文献
5.
V. Radhakrishnan G. Srinivasan 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》1981,1(13):95-98
The difference in morphology between filled and shell type supernova remnants is attributed to differences in the activity of the neutron stars left by the supernovae. Pulsar activity leads to centrally concentrated remnants similar to the Crab. Non-activity as a pulsar results in all of the rotational energy loss going into dipole radiation. The pressure of this radiation creates shell-like objects with hollow interiors such as Cas A. 相似文献
6.
James D. Walker Christopher J. Freitas Mark B. Tapley 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2004,33(12):2270-2275
Due to the long lead time and great expense of traditional sample return mission plans to Mars or other astronomical bodies, there is a need for a new and innovative way to return materials, potentially at a lower cost. The Rapid Impactor Sample Return (RISR) mission is one such proposal. The general mission scenario involves a single pass of Mars, a Martian moon or an asteroid at high speeds (7 km/s), with the sample return vehicle skimming just 1 or 2 m above a high point (such as a top ridge on Olympus Mons on Mars) and releasing an impactor. The impactor strikes the ground, throwing up debris. The debris with roughly the same forward velocity will be captured by the sample return vehicle and returned to Earth. There is no delay or orbit in the vicinity of Mars or the asteroid: RISR is a one-pass mission. This paper discusses some of the details of the proposal. Calculations are presented that address the question of how much material can be recovered with this technique. There are concerns about the effect of Mars tenuous atmosphere. However, it will be noted that such issues do not occur for RISR style missions to Phobos, Deimos, or asteroids and Near Earth Objects (NEOs). Recent test results in the missile defense community (IFTs 6–8 in 2001, 2002) have scored direct hits at better than 1 m accuracy with closing velocities of 7.6 km/s, giving the belief that accuracy and sensing issues are developed to a point that the RISR mission scenario is feasible. 相似文献
7.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(1):816-828
Asteroid exploration has become a research hotspot, and anchoring probes to asteroids is essential for in situ scientific detections. The influence of ultrasonic drilling force-closure anchoring parameters on the anchoring performance and its influence mechanism are studied based on discrete element simulation. An anchoring simulation model is established after calibrating virtual asteroid soil, and its validity is verified by anchoring experiments. Discrete element simulations are performed to study the effect of cross-sectional shape and longitudinal cross-sectional shape of anchoring rods on anchoring force. The internal influence mechanism of anchor configurations on the anchoring force is analyzed by extracting the number of stressed particles in the simulation area. The anchoring force has a positive correlation with the cross-sectional area. The rotation of non-circular anchors causes fluctuations in the anchoring force. The effect of the anchored material strength on the anchoring force is studied with the calibrated virtual asteroid soil. The relationship between anchoring force and anchoring parameters is studied, and the optimal anchoring angle is 54° for anchored material strength of 100 kPa. Finally, the variation of the anchoring force with the direction of external force is studied. This work can guide the anchor configuration design and the anchoring condition parameter optimization. 相似文献
8.
9.
Merel Vergaaij Colin R. McInnes Matteo Ceriotti 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(9):3045-3058
Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from the Earth’s deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. The paper focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods are compared in terms of maximum economic return and sets of attainable target asteroids. Results for transporting resources to geostationary orbit show that the orbital parameter hyperspace of suitable target asteroids is considerably larger for solar sails, allowing for more flexibility in selecting potential target asteroids. Also, results show that the Net Present Value that can be realized is larger when employing solar sailing instead of chemical propulsion. In addition, it is demonstrated that a higher Net Present Value can be realized when transporting volatiles to the Lunar Gateway instead of geostationary orbit. The paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling. 相似文献
10.
Yuan Ren Jinjun Shan 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2014
A tethered asteroid sample and mooring system is investigated in this paper. In this system the spacecraft is moored to the surface of an irregular asteroid such as 216 Kleopatra by using a rocket-propelled anchor with a cable. The rocket-propelled anchor is a kind of space penetrator, which can inject into asteroids at high speeds generated by its own rocket engine. It can be used to explore the interior structure of asteroids, and it can also be used as a sample collector. When the sampling mission is done, the sample can be pulled back to the spacecraft with the anchor. Using this method, the spacecraft can be kept in a safe region in which it cannot be trapped by the gravitational field of the asteroid. This work is concerned with the dynamics of the tethered system near irregular asteroids. First, a shape model and gravitational field model of irregular asteroids are built. Then, the configuration and the stability of the tethered system are investigated, and the quasi-periodic motion near the equilibrium point of the tethered system is analyzed. Finally, the non-uniform density distribution of the asteroids is considered. The deployment process and the oscillation of the tethered system in the uncertain asteroid gravity field are simulated using the Monte Carlo method. The feasibility of the tethered asteroid sample and mooring system is proved. 相似文献
11.
Corinne Lippe Simone D’Amico 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(11):3426-3443
This paper presents a novel methodology to control spacecraft swarms about single asteroids. This approach enables the use of small, autonomous swarm spacecraft in conjunction with a mothership, reducing the need for the Deep Space Network and improving performance in future asteroid missions. The methodology is informed by a semi-analytical model for the spacecraft relative motion that includes relevant gravitational effects without assuming J2-dominance as well as solar radiation pressure. The dynamics model is exploited in an Extended Kalman Filter (EKF) to produce an osculating-to-mean relative orbital element (ROE) conversion that relies on minimum knowledge of the asteroid gravity. The resulting real-time relative mean state estimate is utilized in a new formation-keeping control algorithm. The control problem is cast in mean relative orbital elements to leverage the geometric insight of secular and long-period effects in the definition of control windows for swarm maintenance. Analytical constraints that ensure collision avoidance and enforce swarm geometry are derived and enforced in ROE space. The proposed swarm-keeping algorithms are tested and validated in high-fidelity simulations for a reference asteroid mission. 相似文献
12.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2020,65(4):1105-1124
This paper presents a computationally fast method for solving gravitational accelerations near irregularly-shaped asteroids. This method is based on analytical three-dimensional Chebyshev polynomial approximation of the polyhedral gravity. For the purpose of improving the approximation accuracy, space partitioning schemes based on practical flight zones is used to avoid interpolation the whole space around the target asteroid. Specifically, a minimum ellipsoid close to the asteroid surface is defined to select the space for surrounding trajectories with safe distance and a cone connected to the surface is defined to select the space for descent trajectories. Moreover, interpolation points are sampled in a cosine sampling fashion according to the Chebyshev-Gauss-Lobatto nodes and a radial adaption technique. The performance of different space partitioning schemes is analyzed. The effectiveness of the proposed method is validated through simulations of solving gravitational accelerations at the test points near different shaped asteroids 1996 HW1, 433 Eros, 25143 Itokawa and 101955 Bennu. 相似文献
13.
R. Duffard K. Kumar S. Pirrotta M. Salatti M. Kubínyi U. Derz R.M.G. Armytage S. Arloth L. Donati A. Duricic J. Flahaut S. Hempel A. Pollinger S. Poulsen 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2011
We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace. 相似文献
14.
Yi Zhang Bo Xu 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(1):662-677
A kinetic impact occurs when an asteroid is moving. The impact may be caused by other small celestial body or an artificial object. Ejecta is produced from an impact. Dynamics of ejecta near a binary system which contains an ellipsoid and a sphere is analyzed. A phase diagram which comes from numerical simulation is shown in this work. The phase diagram shows a clear structure. Some special trajectories are also shown, which indicates a potential source of asteroid orbiting objects. 相似文献
15.
Bo Zhang Yuanli Cai Fei Li 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2019,63(7):2035-2051
Hovering over an irregular-shaped asteroid is particularly challenging due to the large gravitational uncertainties and various external disturbances. An adaptive control scheme considering commanded acceleration and its change-rate saturation for hovering is developed in this paper. Taking full advantage of terminal sliding-mode control theory, first, we convert the double-saturated control problem to a new equivalent system by introducing a special bounded function, in which just control input saturation needs to be considered. Then, a continuous finite-time saturated controller is designed for the new system with the assistance of an constructed auxiliary subsystem. Additionally, an adaptive law is devised for the controller to avoid the requirement of the unknown upper bounds of the disturbances, rendering the control scheme especially suitable to asteroid hovering missions. The finite-time stability of the whole closed-loop system is proved via Lyapunov analysis. Numerical simulation studies are carried out, and the results demonstrate the design features and the desired performance. 相似文献
16.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(1):829-844
The paper describes a general modelling procedure to build a simulation tool to investigate contact motion of a CubeSat on an asteroid surface. We investigate landing performance and landing success for the case of elastic rocky terrain and flat surfaces. As a case study, we focus on the disposal of ESA’s Hera Milani CubeSat by landing on the moon of Didymos binary asteroid system. The simulation environment includes the modelling of real shape and 6-DOF motion of the lander, the shape-based gravity models of Didymos and Dimorphos and rocks on surface, that are generated as physical obstacles. Trends and estimates on the performance of the landing phase and the most relevant effects on the outcome of the soil interaction process, are inferred. The statistical results on settling time, dispersion area and motion characteristics, such as number of bounces, show and quantify the effect of rocks on a successful passive and permanent landing. 相似文献
17.
Matteo Ceriotti Giulia Viavattene Iain Moore Alessandro Peloni Colin R. McInnes Jan Thimo Grundmann 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(9):3012-3026
Near-Earth object (NEO) in-situ exploration can provide invaluable information for science, possible future deflection actions and resource utilisation. This is only possible with space missions which approach the asteroid from its vicinity, i.e. rendezvous. This paper explores the use of solar sailing as means of propulsion for NEO rendezvous missions. Given the current state of sail technology, we search for multiple rendezvous missions of up to ten years and characteristic acceleration of up to 0.10 mm/s2. Using a tree-search technique and subsequent trajectory optimisation, we find numerous options of up to three NEO encounters in the launch window 2019–2027. In addition, we explore steerable and throttleable low-thrust (e.g. solar-electric) rendezvous to a particular group of NEOs, the Taurid swarm. We show that an acceleration of 0.23 mm/s2 would suffice for a rendezvous in approximately 2000 days, while shorter transfers are available as the acceleration increases. Finally, we show low-thrust options (0.3 mm/s2) to the fictitious asteroid 2019 PDC, as part of an asteroid deflection exercise. 相似文献
18.
Andrea DAmbrosio Christian Circi Xiangyuan Zeng 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2019,63(11):3691-3705
Solar-photon sails can be useful for missions towards and about asteroids. Indeed, for the interplanetary transfer phase, missions to asteroids often require a large variation in inclination and solar-photon sails perform very well for such high energy missions. In the same way, solar-photon sails are also expected to perform well in the phase about the asteroid. This paper studies single and binary asteroids’ hovering regions by using a sailcraft. In order to consider a sailcraft with its own mass and shape, the mutual polyhedral method (usually used to study asteroid dynamics) is used; therefore, the sailcraft is designed by means of tetrahedra. The procedure to obtain the hovering regions about a single asteroid is presented and an accurate analysis of the control variables is carried out. Moreover, control torques required to maintain hovering orbits are obtained by considering the gravitational torques acting on the sailcraft due to the asteroid. In the end, the theory for hovering orbits is extended to binary-asteroid systems and applied to the binary system 1999 KW4. 相似文献
19.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2023,71(1):645-653
This paper investigates the asteroid hovering problem using the Multiple-Overlapping-Horizon Multiple-Model Predictive Control method. The effectiveness of the predictive controllers in satisfying control constraints and minimizing the required control effort is making Model Predictive Control a desirable control method for asteroid exploration missions which consist of the asteroid hovering phase. However, the computational burden of Model Predictive Control is an obstacle to employing the asteroid’s complex gravitational field model. As an alternative option, the Multiple Horizon Multiple-Model Predictive Control method has been introduced previously, which could provide a solution with the less computational burden with respect to the nonlinear Model Predictive Control. It was shown that it is not necessary to deduce the exact dynamics model to predict the system’s behavior during a long period using this approach. However, the calculated control acceleration was not smooth enough because of the crisp borders of consecutive horizons, which may cause an image motion and degrades the geometric accuracy of high-resolution images in asteroid hovering missions. In this paper, the Multiple-Overlapping-Horizon Multiple-Model Predictive Control method is introduced instead to solve the problem of controlling acceleration fluctuations by overlapping consecutive horizons. Numerical simulation results are presented to validate the effectiveness of the proposed control method, and its advantage is demonstrated accordingly for the asteroid hovering problem in achieving the hovering position and velocity. 相似文献
20.
Yu Jiang Hexi Baoyin Hengnian Li 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2018,61(5):1371-1385
We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d. 相似文献