Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

近地卫星和星座离轨机动研究

空间碎片减缓的积极措施之一是要求近地卫星在使命完成以后进行离轨机动,然后依靠大气阻力作用使卫星在不到25年的时间内自行消失.对此,研究了离轨机动的代价与使命后寿命的关系,提出并解决了正问题和逆问题;介绍了计算卫星寿命的高效率方法.为近地轨道卫星的设计提供了处理离轨机动问题的实用方法.      

A deorbiter CubeSat for active orbital debris removal

This paper introduces a mission concept for active removal of orbital debris based on the utilization of the CubeSat form factor. The CubeSat is deployed from a carrier spacecraft, known as a mothership, and is equipped with orbital and attitude control actuators to attach to the target debris, stabilize its attitude, and subsequently move the debris to a lower orbit where atmospheric drag is high enough for the bodies to burn up. The mass and orbit altitude of debris objects that are within the realms of the CubeSat’s propulsion capabilities are identified. The attitude control schemes for the detumbling and deorbiting phases of the mission are specified. The objective of the deorbiting maneuver is to decrease the semi-major axis of the debris orbit, at the fastest rate, from its initial value to a final value of about 6471?km (i.e., 100?km above Earth considering a circular orbit) via a continuous low-thrust orbital transfer. Two case studies are investigated to verify the performance of the deorbiter CubeSat during the detumbling and deorbiting phases of the mission. The baseline target debris used in the study are the decommissioned KOMPSAT-1 satellite and the Pegasus rocket body. The results show that the deorbiting times for the target debris are reduced significantly, from several decades to one or two years.     

Instability of the present LEO satellite populations

Several studies conducted during 1991–2001 demonstrated, with some assumed launch rates, the future unintended growth potential of the Earth satellite population, resulting from random, accidental collisions among resident space objects. In some low Earth orbit (LEO) altitude regimes where the number density of satellites is above a critical spatial density, the production rate of new breakup debris due to collisions would exceed the loss of objects due to orbital decay.     

Nanosatellite constellation deployment using on-board magnetic torquer interaction with space plasma

One of the advantages that drive nanosatellite development is the potential of multi-point observation through constellation operation. However, constellation deployment of nanosatellites has been a challenge, as thruster operations for orbit maneuver were limited due to mass, volume, and power. Recently, a de-orbiting mechanism using magnetic torquer interaction with space plasma has been introduced, so-called plasma drag. As no additional hardware nor propellant is required, plasma drag has the potential in being used as constellation deployment method. In this research, a novel constellation deployment method using plasma drag is proposed. Orbit decay rate of the satellites in a constellation is controlled using plasma drag in order to achieve a desired phase angle and phase angle rate. A simplified 1D problem is formulated for an elementary analysis of the constellation deployment time. Numerical simulations are further performed for analytical analysis assessment and sensitivity analysis. Analytical analysis and numerical simulation results both agree that the constellation deployment time is proportional to the inverse square root of magnetic moment, the square root of desired phase angle and the square root of satellite mass. CubeSats ranging from 1 to 3?U (1–3?kg nanosatellites) are examined in order to investigate the feasibility of plasma drag constellation on nanosatellite systems. The feasibility analysis results show that plasma drag constellation is feasible on CubeSats, which open up the possibility of CubeSat constellation missions.     

The influence of orbital maneuver on autonomous orbit determination of an extended satellite navigation constellation

The right ascension of the ascending node is unobservable if only the inter-satellite ranging is used for autonomous orbit determination (AOD) of an Earth navigation constellation. However, if an Earth-Moon libration point satellite is added to the Earth navigation constellation to construct an extended navigation constellation, all the orbital elements can be determined with only the inter-satellite ranging. Furthermore, the extended navigation constellation can provide navigation information for interplanetary probes. For such an extended navigation constellation, orbital control needs to be considered due to the instability of the libration-point satellite orbit. This study concerns the influence of satellite orbital maneuver on the AOD of the extended navigation constellation. An AOD method under orbital maneuver is proposed. A low thrust controller is designed to achieve libration point satellite autonomous orbit maintenance by using AOD results. A navigation constellation consisting of three GPS satellites and one libration point satellite are designed for simulation. The simulation results show that libration point satellites can achieve autonomous navigation and autonomous orbit maintenance by only using inter-satellite ranging information. The rotation drift error of the Earth navigation constellation is also suppressed.     

关于HEO空间飞行体的轨道寿命问题

低轨地球卫星的轨道寿命主要取决于大气的耗散作用,其轨道在不断变小(即高度降低)变圆的状态下进入地球稠密大气层中陨落.但HEO(Highly Eccentric Orbit)类型的空间飞行体的运行轨道是一个近地点高度很低,远地点高度却很高的大偏心率椭圆轨道,其轨道寿命主要由第三体(日、月)引力摄动所决定,而且还与其轨道的初始状态有密切关系,特别是慢变量Ω(轨道升交点经度)和ω(轨道近地点幅角),决定了偏心率e的长周期变化状态,从而制约了HEO类型空间飞行体的轨道寿命.本文将根据地球卫星轨道变化规律进行理论分析,阐明这一力学机制,并给出相应的数值验证.      

Track detection of high-velocity resident space objects in Low Earth Orbit

The world’s economy has become heavily dependent on the services provided by satellites. With the exponential increase in satellite launches, the population of defunct or inactive hardware in space has grown substantially. This is especially true in sensitive orbits such as the Low Earth Orbit (LEO) and Geostationary Earth Orbit (GEO) regimes. These objects, collectively known as orbital debris, can reach speeds of up to 28 000km h^?1 in LEO. At these orbital speeds, even the smallest of objects can pose a considerable threat to operational satellites or astronauts. This makes the monitoring, and detection, of these objects of the utmost importance. This work describes the latest detection strategy used in one of Europe’s largest Space Situational Awareness (SSA) installation; the BIstatic RAdar for LEo Survey (BIRALES) space debris radar. We present a novel bottom-up approach that makes use of single-linkage clustering to identify faint radar streaks in spectrogram data. Tests on synthetic data have shown that the detection strategy presented in this study obtains a higher detection rate when it is compared against existing methods. Unlike other approaches, this detection strategy, using the Multi-beam streak detection strategy (MSDS) algorithm, was still able to recall 90% of the track information at an Signal-to-Noise Ratio (SNR) of 2dB.     

Drag and energy accommodation coefficients during sunspot maximum

Conditions appropriate to gas-surface interactions on satellite surfaces in orbit have not been successfully duplicated in the laboratory. However, measurements by pressure gauges and mass spectrometers in orbit have revealed enough of the basic physical chemistry that realistic theoretical models of the gas-surface interaction can now be used to calculate physical drag coefficients. The dependence of these drag coefficients on conditions in space can be inferred by comparing the physical drag coefficient of a satellite with a drag coefficient fitted to its observed orbital decay. This study takes advantage of recent data on spheres and attitude stabilized satellites to compare physical drag coefficients with the histories of the orbital decay of several satellites during the recent sunspot maximum. The orbital decay was obtained by fitting, in a least squares sense, the semi-major axis decay inferred from the historical two-line elements acquired by the US Space Surveillance Network. All the principal orbital perturbations were included, namely geopotential harmonics up to the 16th degree and order, third body attraction of the Moon and the Sun, direct solar radiation pressure (with eclipses), and aerodynamic drag, using the Jacchia-Bowman 2006 (JB2006) model to describe the atmospheric density. After adjusting for density model bias, a comparison of the fitted drag coefficient with the physical drag coefficient has yielded values for the energy accommodation coefficient as well as for the physical drag coefficient as a function of altitude during solar maximum conditions. The results are consistent with the altitude and solar cycle variation of atomic oxygen, which is known to be adsorbed on satellite surfaces, affecting both the energy accommodation and angular distribution of the reemitted molecules.     

利用TLE数据分析LEO卫星轨道异常的新方法——————综合判据法

及时准确地发现在轨卫星的轨道异常意义重大. 通过有效的异常算法, 能够找出发生轨道异常的碎片或航天器, 为空间碎片碰撞预警系统分析和验证碰撞事件提供数据支持. 通过对利用TLE (Two Line Elements)数据分析LEO在轨卫星轨道异常的方法研究, 提出了一个利用单个卫星相邻根数时间差控制加综合判据的判别方法. 分析表明, 相对于取单一因素阈值的判别方法, 综合判据法能够最大限度地减少漏判, 并且保持相对较高的判断准确率.      

A multiple-CubeSat constellation for integrated earth observation and marine/air traffic monitoring

CubeSats has evolved from purely educational tools, to useful platforms for technology demonstration and many practical applications. This paper reviews a CubeSat constellation mission involving 3 CubeSats launched into orbit on Sep. 25th 2015, aiming to demonstrate the integrated application of low-cost CubeSat technologies with distributed payloads using a group of satellites, as well as to demonstrate several new technologies. The mission scenario, the satellite system design, the innovative technologies and instruments or devices used on the CubeSats and the in-orbit experimental results and the payload data analysis, as well as some experiences and lessons learned, are presented and summaried.     

一种基于TLE数据的轨道异常分析方法

空间在轨物体的轨道异常是航天工程及预警领域普遍关注的问题,及时发现轨道异常意义重大,通过分析空间物体的轨道异常,可以及时发现和识别规避事件或碰撞事件,还可以了解监测网的能力.本文提出一种基于TLE数据的简单的轨道异常分析方法——长半轴变化法.该方法快速有效,应用到低轨在用卫星和美俄解体碎片的异常分析中,异常物体正确识别率可达到100%;对美俄解体碎片进行轨道异常分析后得出,美国空间监视网可以稳定探测90%以上的解体碎片.      

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

Disposal orbits for GEO spacecraft: A method for evaluating the orbit height distributions resulting from implementing IADC guidelines

Geostationary orbit (GEO) is the most commercially valuable Earth orbit. The Inter-Agency Space Debris Coordination Committee (IADC) has produced guidelines to help protect this region from space debris. The guidelines propose moving a satellite at the end of its operational life to a disposal orbit, which is designed so that satellites left there will not infringe the operational GEO region within a period of at least 100 yr.     

Spot 1 end of life disposition manoeuvres

The Earth observation satellites of the SPOT family are on a Sun-synchronous orbit at 822 km altitude. The on-orbit lifetime of objects at this altitude is about two centuries, which represents an important risk to the other satellites.The space debris issue has caused the main Agencies to adopt mitigation guidelines with the objective to reduce the population of objects orbiting the Earth. In 1999, CNES published its own standard presenting the management, design and operation rules. This document is fully compliant with the Inter Agency Space Debris Coordination Committee (IADC) mitigation guidelines approved in 2002 by 11 Space Agencies and submitted to United Nations – Committee on Peaceful Uses of Outer Space in February 2003.The space debris mitigation requirements expressed in the CNES standard and in the IADC mitigation guidelines limit the orbital lifetime in LEO to less than 25 years. Although not applicable to Spot 1, launched earlier in 1986, this rule was voluntarily applied and the decision to deorbit Spot 1 was taken.The corresponding operations, performed in November 2003, were complex due to a large number of constraints such as the unusual flight domain, the on-board sensors, the short ground station visibilities or the uncertainties in the estimation of the remaining fuel in the tanks. In the preliminary phase, the orbit was lowered 15 km below the operational orbit to avoid any collision risk with the other Spot satellites. Then, in a second phase, a series of eight apogee boosts lowered progressively the perigee altitude to 619 km. Finally, a large last manoeuvre was performed to empty the tanks and to reduce the perigee altitude the maximum amount. A succession of four ground stations visibilities allowed a real time monitoring of this manoeuvre. In particular the effect of gas bubbles in the propulsion system was observed through telemetry confirming the fuel depletion. The batteries were then disconnected and the telemetry emitter was switched off. According to the obtained perigee altitude, the on-orbit lifetime of Spot 1 should be about 18 years, which meets the space debris mitigation requirements.     

卫星规避方案量化分析方法研究

空间碎片数量日益增多,为保护在轨卫星的运行安全,需要针对碎片碰撞制定规避方案,用来规避碰撞风险.本文在调研国外卫星规避机动流程的基础上,分别研究了卫星规避相关的轨道机动方式、轨道预报模型以及交会风险计算模型,建立了卫星规避方案量化分析方法,为规避方案的选择提供参考.      

Space debris mitigation strategies and practices in geosynchronous transfer orbits

Missions to geosynchronous orbits remain one of the most important elements of space launch traffic, accounting for 40% of all missions to Earth orbit and beyond during the four-year period 2000–2003. The vast majority of these missions leave one or more objects in geosynchronous transfer orbits (GTOs), contributing on a short-term or long-term basis to the space debris population. National and international space debris mitigation guidelines seek to curtail the accumulation of debris in orbits which penetrate the regions of low Earth orbit and of geosynchronous orbit. The orbital lifetime of objects in GTO can be greatly influenced by the initial values of perigee, inclination, and right ascension of the orbital plane, leading to orbital lifetimes of from less than one month to more than 100 years. An examination of the characteristic GTOs employed by launch vehicles from around the world has been conducted. The consequences of using perigees above 300 km and super-synchronous apogees, typically above 40,000 km, have been identified. In addition, the differences in orbital behavior of launch vehicle stages and mission-related debris in GTOs have been investigated. Greater coordination and cooperation between space launch service providers and spacecraft designers and owners could significantly improve overall compliance with guidelines to mitigate the accumulation of debris in Earth orbit.     

Improved orbit predictions using two-line elements

The density of orbital space debris constitutes an increasing environmental challenge. There are two ways to alleviate the problem: debris mitigation and debris removal. This paper addresses collision avoidance, a key aspect of debris mitigation. We describe a method that contributes to achieving a requisite increase in orbit prediction accuracy for objects in the publicly available two-line element (TLE) catalog. Batch least-squares differential correction is applied to the TLEs. Using a high-precision numerical propagator, we fit an orbit to state vectors derived from successive TLEs. We then propagate the fitted orbit further forward in time. These predictions are validated against precision ephemeris data derived from the international laser ranging service (ILRS) for several satellites, including objects in the congested sun-synchronous orbital region. The method leads to a predicted range error that increases at a typical rate of 100 m per day, approximately a 10-fold improvement over individual TLE’s propagated with their associated analytic propagator (SGP4). Corresponding improvements for debris trajectories could potentially provide conjunction analysis sufficiently accurate for an operationally viable collision avoidance system based on TLEs only.     

Thermosphere density and wind measurements in the equatorial region using a constellation of drag balance nanospacecraft

A mission for in situ thermosphere density and winds measurement is described, based on nanospacecraft equipped with a drag balance instrument (DBI) and a GPS receiver. The mission is based on nanosatellite clusters deployed in three orbital planes. In this study, clusters of 10 nanospacecraft are considered, leading to a mission based on a total of 30 nanospacecraft. The geometry analyzed is a symmetrical one, including an equatorial orbit and two orbits with the same inclination and opposing ascending nodes. The main idea is that, by combining the accurate information on the satellite inertial position and velocity provided by the GPS receiver and the drag acceleration intensity provided by the DBI, due to the orbits’ geometrical configuration, both atmospheric drag and wind can be resolved in a region close to the orbit nodes. Exploiting the Earth oblateness effect, a complete scan of the equatorial regions can be accomplished in the short mission lifetime typical of very low Earth orbit satellites, even in high solar activity peaks, when the expected nanospacecraft lifetime is about 40 days.     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.