Shape optimization of a three-dimensional membrane-structured solar sail using an angular momentum unloading strategy

A shape of the satellite’s solar sail membrane is essential for unloading angular momentum in the three-axis stabilized attitude control system because the three-dimensional solar sail can receive solar radiation pressure from arbitrary directions. In this paper, the objective is the shape optimization of a three-dimensional membrane-structured solar sail using the angular momentum unloading strategy. We modelled and simulated the solar radiation pressure torque, for unloading angular momentum. Using the simulation system, since the unloading angular momentum rate is maximized, the shape of the three-dimensional solar sail was optimized using a Genetic algorithm and Sequential Quadratic Programming. The unloading velocity in the optimized shaped solar sail was greatly improved with respect to a conventional flat or pyramid solar sail.     

Attitude stability criteria of axisymmetric solar sail

Passive attitude stability criteria of a solar sail whose membrane surface is axisymmetric are studied in this paper under a general SRP model. This paper proves that arbitrary attitude equilibrium position can be designed through adjusting the deviation between the pressure center and the mass center of the sail. The linearized method is applied to inspect analytically the stability of the equilibrium point from two different points of views. The results show that the attitude stability depends on the membrane surface shape and area. The results of simulation with full dynamic equations confirm that the two stability criteria are effective in judging the attitude stability for axisymmetric solar sail. Several possible applications of the study are also mentioned.     

A torus-shaped solar sail accelerated via thermal desorption of coating

A torus-shaped sail consists of a reflective membrane attached to an inflatable torus-shaped rim. The sail’s deployment from its stowed configuration is initiated by introducing inflation pressure into the toroidal rim with an attached circular flat membrane coated by heat-sensitive materials that undergo thermal desorption (TD) from a solid to a gas phase. Our study of the deployment and acceleration of the sail is split into three steps: at a particular heliocentric distance a torus-shaped sail is deployed by a gas inflated into the toroidal rim and the membrane is kept flat by the pressure of the gas; under heating by solar radiation, the membrane coat undergoes TD and the sail is accelerated via TD of coating and solar radiation pressure (SRP); when TD ends, the sail utilizes thrust only from SRP. We study the stability of the torus-shaped sail and deflection and vibration of the flat membrane due to the acceleration by TD and SRP.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

Solar power sail membrane prototype for OKEANOS mission

This paper reports on the manufacturing and evaluation of a solar power sail membrane prototype for the OKEANOS project. The in-house prototype was built by the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency. Mechanical and electrical evaluation tests were conducted. The membrane, thin-film solar cells, reflectivity control devices were good condition after the manufacturing and handling. The improvements in the manufacturing process and design were found. The manufacturing process and design were fundamentally established. After the prototype, improvement plans for the manufacturing process and design were tried. We have a prospect of manufacturing the flight model sail and continue to the development.     

Sailing with solar and planetary radiation pressure

Literature on solar sailing has thus far mostly considered solar radiation pressure (SRP) as the only contribution to sail force. However, considering a sail in a planetary mission scenario, a new contribution can be added. Since the planet itself emits radiation, this generates a radial planetary radiation pressure (PRP) that is also exerted on the sail. Hence, this work studies the combined effects of both SRP and PRP on a sail for two case studies, i.e. Earth and Venus. In proximity of the Earth, the effect of PRP can be significant under specific conditions. Around Venus, instead, PRP is by far the dominating contribution. These combined effects have been studied for single- and double-sided reflective coating and including eclipse. Results show potential increase in the net acceleration and a change in the optimal attitude to maximise the acceleration in a given direction. Moreover, an increasing semi-major axis manoeuvre is shown with and without PRP, to quantify the difference on a real-case scenario.     

太阳帆飞行器轨道动力学分析

通过分析对轨道要素影响最大的加速度分量,使太阳帆总是位于光压力沿这个加速度方向的分量最大的方位。通过分析轨道要素调整时的相互影响关系,提出了同时修正多种轨道偏差的控制方案。对处于地球静止轨道上太阳帆飞行器的轨道调整进行了数值仿真。结果证明利用太阳光压力进行轨道调整是可行的,而且有利的太阳方位是进行快速有效的轨道调整的必要条件。     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

Application of a modified generalized sail model on a solar sail with wrinkles

In this paper, we present an analysis of effect of wrinkles on the solar sail performance. We describe different analytical, semi-analytical and numerical approaches to the calculation of general large-scale curvature of a solar sail as well as parameters of so-called wrinkled domains, and introduce the impact of such wrinkles on the thrust and torque of the solar sail. Finally, we present a model of an optically-orthotropic surface for such non-ideal sail, providing a connection with the Generalized Sail Model, and other solar sail thrust models.     

On the stabilizing effect of Solar Radiation Pressure in the Earth-Moon system

Solar sails change the natural dynamics of systems: Trajectories that are driven by gravitational forces can be displaced and changed because of the effect of Solar Radiation Pressure (SRP). Moreover, if the lightness number of the sail is large enough, the instability of certain orbits can be diminished and even removed. In this paper we modify two models for the motion of a probe in the Earth-Moon system that include the effect of Sun’s gravity to take also into account the effect of SRP. These models, the Bicircular Problem (BCP) and the Quasi-Bicircular Problem (QBCP), are periodic perturbations of the Earth-Moon Restricted Three Body Problem (RTBP). The models are modified to consider the effect of the SRP upon a solar sail. We provide examples of periodic orbits that are stabilized (or made less unstable) due to the effect of SRP.     

Durability characterization of mechanical interfaces in solar sail membrane structures

The construction of a solar sail from commercially available metallized film presents several challenges. The solar sail membrane is made by seaming together precut lengths of ultrathin metallized polymer film into the required geometry. This assembled sail membrane is then folded into a small stowage volume prior to launch. The sail membranes must have additional features for connecting to rigid structural elements (e.g., sail booms) and must be electrically grounded to the spacecraft bus to prevent charge build up. Space durability of the material and mechanical interfaces of the sail membrane assemblies will be critical for the success of any solar sail mission. In this study, interfaces of polymer/metal joints in a representative solar sail membrane assembly were tested to ensure that the adhesive interfaces and the fastening grommets could withstand the temperature range and expected loads required for mission success. Various adhesion methods, such as surface treatment, commercial adhesives, and fastening systems, were experimentally tested in order to determine the most suitable method of construction.     

Effects of optical parameter measurement uncertainties and solar irradiance fluctuations on solar sailing

The heliocentric orbital dynamics of a spacecraft propelled by a solar sail is affected by some uncertainty sources, including possible inaccuracies in the measurement of the sail film optical properties. Moreover, the solar radiation pressure, which is responsible for the solar sail propulsive acceleration generation, is not time-constant and is subject to fluctuations that are basically unpredictable and superimposed to the well-known 11-year solar activity cycle. In this context, this work aims at investigating the effects of such uncertainties on the actual heliocentric trajectory of a solar sail by means of stochastic simulations performed with a generalized polynomial chaos procedure. The numerical results give an estimation of their impact on the actual heliocentric trajectory and identify whether some of the uncertainty sources are more relevant than others. This is a fundamental information for directing more accurate theoretical and experimental efforts toward the most important parameters, in order to obtain an accurate knowledge of the solar sail thrust vector characteristics and, eventually, of the spacecraft heliocentric position.     

Influence of optical parameters on a solar sail motion

Detailed dynamic modeling of a solar sail requires recording of solar radiation pressure influence. A photon-solar sail is determined by the thrust value and the direction. We define the solar sail’s reflectivity depending on the film materials, the sail design and temperature, the thickness of multiple layers, and degradation factor, with a reasonable degree of accuracy. Thus, this work is devoted to the identification of optical characteristics of thin multilayer films in space flight conditions, i.e. to finding its reflectance, absorbance, and transmittance. In particular, the paper asks whether the solar sail simulates by a mathematical model of the optical characteristics of a multilayer epitaxial thin film. The temperature change effect and optical properties of solar sail degradation are considered as well. Solar sail flight from Earth to Mercury is designed as a simulation of the flight change in optical parameters.     

A simple control law for reducing the effective characteristic acceleration of a solar sail

The direction and magnitude of a solar sail acceleration are strongly related. For this reason, once the characteristic acceleration has been fixed, it is not possible to modulate the acceleration in a particular direction. In this work, a semi-analytical switching control law is derived, enabling a solar sail to emulate a smaller effective characteristic acceleration (without changes in geometry or optical properties); by periodically changing the pitch (cone) angle of the sail, in average over time, the acceleration produced by the sail matches exactly (in both direction and magnitude) that of a “smaller” sail. The range in which this is possible is determined, and the limitations on this range due to the size difference is computed. The method is validated on optimal Earth-Mars trajectories.     

Mission analysis and performance comparison for an Advanced Solar Photon Thruster

The so-called “compound solar sail”, also known as “Solar Photon Thruster” (SPT), is a design concept, for which the two basic functions of the solar sail, namely light collection and thrust direction, are uncoupled. In this paper, we introduce a novel SPT concept, termed the Advanced Solar Photon Thruster (ASPT), which does not suffer from the simplified assumptions that have been made for the analysis of compound solar sails in previous studies. After having presented the equations that describe the force on the ASPT and after having performed a detailed design analysis, the performance of the ASPT with respect to the conventional flat solar sail (FSS) is investigated for three interplanetary mission scenarios: an Earth–Venus rendezvous, where the solar sail has to spiral towards the Sun, an Earth–Mars rendezvous, where the solar sail has to spiral away from the Sun, and an Earth-NEA rendezvous (to near-Earth asteroid 1996FG3), where a large change in orbital eccentricity is required. The investigated solar sails have realistic near-term characteristic accelerations between 0.1 and 0.2 mm/s². Our results show that an SPT is not superior to the flat solar sail unless very idealistic assumptions are made.     

Bound orbits of solar sails and general relativity

We study general relativistic effects on the bound orbits of solar sails. The combined effects of spacetime curvature and solar radiation pressure (SRP) lead to deviations from Kepler’s third law. Such kind of deviations also arise from frame dragging, the gravitational multipole moments of the sun, a net electric charge on the sun, and a positive cosmological constant. The SRP increases these deviations by several orders of magnitude, possibly rendering some of them detectable. We consider how the SRP modifies the perihelion shift of non-circular orbits, as well as the Lense-Thirring effect involving the precession of polar orbits. We investigate how the pitch angle for non-Keplerian orbits changes due to the partial absorption of light, general relativistic effects, and the oblateness of the sun. It is predicted that there is an analog of the Lense-Thirring effect for non-Keplerian orbits, in that the orbital plane precesses around the sun. We also consider the Poynting–Robertson effect and show that this effect can, in principle, be compensated for by an extremely small tilt of the solar sail.     

Drag force on solar sails due to absorption of solar radiation

We consider a special relativistic effect, known as the Poynting–Robertson effect, on various types of trajectories of solar sails. Since this effect occurs at order v^?/c, where v^? is the transversal speed relative to the sun, it can dominate over other special relativistic effects, which occur at order v²/c². While solar radiation can be used to propel the solar sail, the absorbed portion of it also gives rise to a drag force in the transversal direction. For escape trajectories, this diminishes the cruising velocity, which can have a cumulative effect on the heliocentric distance. For a solar sail directly facing the sun in a bound orbit, the Poynting–Robertson effect decreases its orbital speed, thereby causing it to slowly spiral towards the sun. We also consider this effect for non-Keplerian orbits in which the solar sail is tilted in the azimuthal direction. While in principle the drag force could be counter-balanced by an extremely small tilt of the solar sail in the polar direction, periodic adjustments are more feasible.     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

Spinning solar sail orbit steering via spin rate control

The orbit of a solar sail can be controlled by changing the attitude of the spacecraft. In this study, we consider the spinning solar power sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun), which is managed by Japan Aerospace Exploration Agency (JAXA). The IKAROS attitude, i.e., the direction of its spin-axis, is nominally controlled by the rhumb-line control method. By utilizing the solar radiation torque, however, we are able to change the direction of the spin-axis by only controlling its spin rate. With this spin rate control, we can also control indirectly the solar sail’s trajectory. The main objective of this study is to construct the orbit control strategy of the solar sail via the spin-rate control method. We evaluate this strategy in terms of its propellant consumption compared to the rhumb-line control method. Finally, we present the actual flight attitude data of IKAROS and the change of its trajectory.     

Microscopic approach to analyze solar-sail space-environment effects

Near-sun space-environment effects on metallic thin films solar sails as well as hollow-body sails with inflation fill gas are considered. Analysis of the interaction of the solar radiation with the solar-sail materials is presented. This analysis evaluates worst-case solar radiation effects during solar-radiation-pressure acceleration. The dependence of the thickness of solar sail on temperature and on wavelength of the electromagnetic spectrum of solar radiation is investigated. Physical processes of the interactions of photons, electrons, protons and α-particles with sail material atoms and nuclei, and inflation fill gas molecules are analyzed. Calculations utilized conservative assumptions with the highest values for the available cross sections for interactions of solar photons, electrons and protons with atoms, nuclei and hydrogen molecules. It is shown that for high-energy photons, electrons and protons the beryllium sail is mostly transparent. Sail material will be partially ionized by solar UV and low-energy solar electrons. For a hollow-body photon sail effects including hydrogen diffusion through the solar-sail walls, and electrostatic pressure is considered. Electrostatic pressure caused by the electrically charged sail’s electric field may require mitigation since sail material tensile strength decreases with elevated temperature. It also can substitute inflation-gas pressure loss due to gas diffusion and perforation by micrometeoroids impact to keep the sail inflated.