Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

Time synchronization of new-generation BDS satellites using inter-satellite link measurements

Autonomous satellite navigation is based on the ability of a Global Navigation Satellite System (GNSS), such as Beidou, to estimate orbits and clock parameters onboard satellites using Inter-Satellite Link (ISL) measurements instead of tracking data from a ground monitoring network. This paper focuses on the time synchronization of new-generation Beidou Navigation Satellite System (BDS) satellites equipped with an ISL payload. Two modes of Ka-band ISL measurements, Time Division Multiple Access (TDMA) mode and the continuous link mode, were used onboard these BDS satellites. Using a mathematical formulation for each measurement mode along with a derivation of the satellite clock offsets, geometric ranges from the dual one-way measurements were introduced. Then, pseudoranges and clock offsets were evaluated for the new-generation BDS satellites. The evaluation shows that the ranging accuracies of TDMA ISL and the continuous link are approximately 4?cm and 1?cm (root mean square, RMS), respectively. Both lead to ISL clock offset residuals of less than 0.3?ns (RMS). For further validation, time synchronization between these satellites to a ground control station keeping the systematic time in BDT was conducted using L-band Two-way Satellite Time Frequency Transfer (TWSTFT). System errors in the ISL measurements were calibrated by comparing the derived clock offsets with the TWSTFT. The standard deviations of the estimated ISL system errors are less than 0.3?ns, and the calibrated ISL clock parameters are consistent with that of the L-band TWSTFT. For the regional BDS network, the addition of ISL measurements for medium orbit (MEO) BDS satellites increased the clock tracking coverage by more than 40% for each orbital revolution. As a result, the clock predicting error for the satellite M1S was improved from 3.59 to 0.86?ns (RMS), and the predicting error of the satellite M2S was improved from 1.94 to 0.57?ns (RMS), which is a significant improvement by a factor of 3–4.     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

BeiDou-3 orbit and clock quality of the IGS Multi-GNSS Pilot Project

Within the Multi-GNSS Pilot Project (MGEX) of the International GNSS Service (IGS), precise orbit and clock products for the BeiDou-3 global navigation satellite system (BDS-3) are routinely generated by a total of five analysis centers. The processing standards and specific properties of the individual products are reviewed and the BDS-3 orbit and clock product performance is assessed through direct inter-comparison, satellite laser ranging (SLR) residuals, clock stability analysis, and precise point positioning solutions. The orbit consistency evaluated by the signal-in-space range error is on the level of 4–8 cm for the medium Earth orbit satellites whereas SLR residuals have RMS values between 3 and 9 cm. The clock analysis reveals sytematic effects related to the elevation of the Sun above the orbital plane for all ACs pointing to deficiencies in solar radiation pressure modeling. Nevertheless, precise point positioning with the BDS-3 MGEX orbit and clock products results in 3D RMS values between 7 and 8 mm.     

Design of BDS-3 integrity monitoring and preliminary analysis of its performance

With the improvement in the service accuracy and expansion of the application scope of satellite navigation systems, users now have high demands for system integrity that are directly related to navigation safety. As a crucial index to measure the reliability of satellite navigation systems, integrity is the ability of the system to send an alarm when an abnormity occurs. The new-generation Beidou Navigation Satellite System (BDS-3) prioritized the upgrading of system integrity as an important objective in system construction. Because the system provides both basic navigation and satellite-based augmentation system (SBAS) services by the operational control system, BDS-3 adopts an integrated integrity monitoring and processing strategy that applies satellite autonomous integrity monitoring and ground-based integrity monitoring for both the basic navigation service and SBAS navigation service. BDS-3 also uses an improved and refined integrity parameter system to provide slow, fast and real-time integrity parameters for basic navigation, and provide SBAS-provided integrity information messages in accordance with Radio Technical Commission for Aeronautics (RTCA) specification and dual frequency, multi-constellation (DFMC) specification to support the SBAS signal frequency, single constellation operation and DFMC operation respectively. The performance of BDS-3 system integrity monitoring is preliminarily verified during on-orbit testing in different states, including normal operation, satellite clock failure and satellite ephemeris failure. The results show that satellite autonomous integrity monitoring, ground-based integrity monitoring and satellite-based augmentation all correctly work within the system. Satellite autonomous integrity monitoring can detect satellite clock failure but not satellite orbit failure. However, ground-based integrity monitoring can detect both. Moreover, the satellite-based augmentation integrity system monitors the differential range error after satellite ephemeris and clock error corrections based on user requirements. Compared to the near minute-level time-to-alert capability of ground-based integrity monitoring, satellite autonomous integrity monitoring reduces the system alert time to less than 4 s. With a combined satellite-ground monitoring strategy and the implementation of different monitoring technologies, the BDS-3 integrity of service has been considerably improved.     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

联合北斗导航与星间链路的大椭圆卫星定轨方法

传统的地面测控和GNSS均无法实现HEO卫星全弧段的跟踪观测.在分析北斗导航信号及其星间链路信号对典型HEO的观测几何及覆盖特性的基础上,利用北斗导航及其星间链路对HEO测控支持形成互补的特点,提出了一种卫星导航与星间链路相结合的自主导航方法.对HEO定轨进行分段划分并基于EKF设计了卫星导航与星间链路数据融合定轨的自主导航算法.分析结果表明,本文提出的方法能够从全弧段上改善HEO的观测几何,定轨精度比仅使用卫星导航提高了2个数量级,并且仅需较少的星间链路资源.      

Comprehensive performance review of BDS-3 after one-year official operation

On July 31, 2020, the third generation BeiDou Global Satellite Navigation System (BDS-3) was officially put into service. Here we first reviewed the development history of BDS-3, and described the status of BDS-3 constellation, satellite signals, and ground tracking network. Then we expounded the 10 innovations in which BDS-3 differs from the other global satellite navigation systems. In addition, the latest service performance status of BDS-3 was displayed from a comprehensive perspective. The performance of BDS-3 was analyzed and evaluated from five aspects: constellation performance, observation data quality, spatial signal performance, PNT (Positioning, Navigation, and Timing) service performance, and precision positioning application. We used 14 indices to conduct comprehensive assessment of the BDS-3 service performance. Finally, the main direction of the next development of BDS was prospected.     

利用条件平差实现导航星座自主守时方法

针对导航星座自主导航系统的重要组成部分———自主守时系统,提出了一种简便易行的新算法:根据星间测距数据,采用条件平差进行自主守时计算;并且介绍了此方法基本原理和实现思路。自主守时仿真计算表明,此方法守时同步误差不累积,距离测量误差0.1m时,时间同步误差均方根小于0.4m。     

Preliminary analysis of the quality and positioning performance of BDS-3 global interoperable signal B1C&B2a

BeiDou-3 Navigation Satellite System (BDS-3) satellites are equipped with the new generation GNSS signals B1C and B2a, which support the interoperability with GPS and Galileo systems. In this study, the pseudo-range multipath error and carrier phase observation noise of the BDS-3 B1C and B2a signals were evaluated based on zero baseline measurements from the day of year (DOY) 113 to 116, 2020. Further, the precision and performance of the single point positioning (SPP) and precise point positioning (PPP) are assessed at 9 stations. This assessment manifests that the standard deviations (STDs) of the pseudo-range multipath error are about 0.09 ~ 0.22 m, while STDs of the carrier phase observation noise are about 0.075 mm. For the single-frequency SPP, its positioning precision is about 2.03 ~ 4.85 m and 3.29 ~ 10.73 m at the 99.99% confidence level in horizontal and vertical directions, respectively, while the dual-frequency SPP precision is about 1.92 ~ 8.02 m and 4.81 ~ 12.77 m in horizontal and vertical directions, respectively. For the daily static PPP, the convergence time is about 20 ~ 30 min, while the daily positioning precision can reach 1.38 ~ 4.42 cm and -1.31 ~ 4.34 cm in horizontal and vertical directions, respectively. In general, the quality and the SPP and PPP performance of the BDS-3 B1C&B2a signals are comparable to the GPS and Galileo.     

Analysis on navigation accuracy of high orbit spacecraft based on BDS GEO and IGSO satellites

To make up for the insufficiency of earth-based TT&C systems, the use of GNSS technology for high-orbit spacecraft navigation and orbit determination has become a new technology. It is of great value to applying Geosynchronous Earth Orbit (GEO) and Inclined GeoStationary Orbit (IGSO) navigation satellites for supporting the navigation of high-orbit spacecraft since there are three different types of navigation satellites in BeiDou Navigation Satellite System (BDS): Medium Earth Orbit (MEO), GEO and IGSO. This paper conducts simulation experiments based on Two-Line Orbital Element (TLE) data to analyze and demonstrate the role of these satellites in the navigation of high-orbit spacecraft. Firstly, the spacecraft in GEO was used as the target satellite to conduct navigation experiments. Experiments show that for the spacecraft on the GEO orbit, after adding GEO and IGSO respectively on the basis of receiving MEO navigation satellite signals, the accuracies were improved by 7.22 % and 6.06 % respectively. When adding both GEO and IGSO navigation satellites at the same time, the accuracy can reach 16 m. In the second place, navigation and positioning experiments were carried out on three high elliptical orbit (HEO) satellites with different semimajor axis (32037.2 km, 42385.9 km, 67509.6 km). The experiments show that the number of visible satellites has been improved significantly after adding GEO and IGSO navigation satellites at the same time. The visible satellites in these three orbits were improved by 32.84 %, 41.12 % and 37.68 %, respectively compared with only observing MEO satellites.The RMS values of the navigation positioning errors of these three orbits are 25.59 m, 87.58 m and 712.48 m, respectively.     

The influence of orbital maneuver on autonomous orbit determination of an extended satellite navigation constellation

The right ascension of the ascending node is unobservable if only the inter-satellite ranging is used for autonomous orbit determination (AOD) of an Earth navigation constellation. However, if an Earth-Moon libration point satellite is added to the Earth navigation constellation to construct an extended navigation constellation, all the orbital elements can be determined with only the inter-satellite ranging. Furthermore, the extended navigation constellation can provide navigation information for interplanetary probes. For such an extended navigation constellation, orbital control needs to be considered due to the instability of the libration-point satellite orbit. This study concerns the influence of satellite orbital maneuver on the AOD of the extended navigation constellation. An AOD method under orbital maneuver is proposed. A low thrust controller is designed to achieve libration point satellite autonomous orbit maintenance by using AOD results. A navigation constellation consisting of three GPS satellites and one libration point satellite are designed for simulation. The simulation results show that libration point satellites can achieve autonomous navigation and autonomous orbit maintenance by only using inter-satellite ranging information. The rotation drift error of the Earth navigation constellation is also suppressed.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

Beidou wide-area augmentation system clock error correction and performance verification

On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added.     

严格回归轨道的管道导航方法研究

分析了作为参考轨道的严格回归轨道与卫星在轨运行状态的相对运动关系,提出近地遥感卫星的管道导航方法。由于参考轨道的设计只考虑高精度的地球非球形摄动,与在轨卫星的动力学环境存在差别,这导致两者之间存在切航向漂移。基于高精度的轨道动力学模型和位置确定方法,设计了卫星与参考轨道采样点的沿航向对齐算法,从而获取了卫星相对参考轨道采样点的相位时间偏差和卫星在参考轨道编队坐标系切航向平面内的相对运动轨迹,进而引入椭圆的“最小二乘适配法”获取相对运动轨迹的特征量。所研究的管道导航方法可应用于基于GNSS测量数据的卫星自主轨迹保持。     

Introduction to global short message communication service of BeiDou-3 navigation satellite system

Short Message Communication (SMC) is a featured service of BeiDou Navigation Satellite System (BDS). After its successful deployment in 2003, Regional Short Message Communication (RSMC) service has been continuously serving China and its neighboring countries and regions, especially in life safety scenarios. In this paper, the architecture of the Global Short Message Communication (GSMC) system is proposed based on the medium earth orbit (MEO) constellation and the crosslinks of the global BeiDou navigation system (BDS-3). Three subtypes of GSMC service, i.e. positioning report, emergency search and rescue (SAR) and regular SMC are designed in accordance with the technical characteristic of integration of navigation and communication in BDS-3, which supports future wide applications of GSMC. The performance of the designed GSMC system is analyzed by numerical calculations. As BDS-3 was officially announced completion on July 31, 2020, GSMC has been providing initial service. First test results of the in orbit GSMC payloads are also presented in the paper to verify the designed capabilities. Preliminary results also show that the requirements of Global Maritime Distress and Safety System (GMDSS) can also be fulfilled.     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.